Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

H-King Bixler 1.1 (PNF) EPO 1400mm (55.1") Planador com 30A ESC

Generating Links

H-King Bixler 1.1 (PNF) EPO 1400mm (55.1") Planador com 30A ESC

Preço:

Now save economize 0,00 € 0,00 €

93,10 €
quantidade:
Enviado de:
  • USA
  • International (Hong Kong)
Já comprado
Status:
Em estoque
SKU:
9306000428-0
Envio Grátis? Clique aqui aprender mais!

O Bixler 1.1 é um avião RC elétrico comprovado para iniciantes até pilotos intermediários. Bem conhecido pela estabilidade, durabilidade e preço acessível, o Bixler 1.1 é um dos melhores aviões RC para iniciantes do mercado. É também uma excelente escolha como uma plataforma FPV barata e perfeita para aquelas tardes preguiçosas de fim de semana.


O Bixler é feito de espuma EPO super resistente com todos os componentes elétricos pré-instalados. Este avião RC pode ser montado em 15 minutos e voado assim que a cola secar.


O modelo apresenta os servos do profundor e do leme mais próximos da parte traseira da aeronave, permitindo mais espaço útil dentro da seção frontal da fuselagem e melhor controle sobre as superfícies aéreas. Também atualizamos o hardware de boa qualidade incluído com base no feedback do cliente.


Se você está procurando um avião de treinamento, um avião esportivo ou um avião FPV, o Bixler 1.1 tem tudo a ver.


Recursos:
• ESC atualizado agora 30A!
• Fácil e Divertido de Voar
• Motor sem escova mais potente e eficiente
• Características de manuseio ágil e suave
• O motor Brushless, ESC e servos são pré-instalados na fábrica
• Asas de encaixe para fácil transporte
• Decalques coloridos são montados na fábrica


Especificações:
Material: Espuma EPO
Envergadura: 1400mm
Comprimento: 925mm
Área da asa: 26dm2
Carregamento de asa: 25g/dm2
Peso Voador: 650g
Motor: 2212-1900kV Brushless Outrunner
ESC: 30A com BEC
Servo: 4 x 9g
Hélice: 6x4


Requeridos:
Transmissor de 4 canais e receptor correspondente
Bateria LiPo 2200mAh 3s + carregador adequado


Nota: Por favor, procure na guia Arquivos o Manual do Produto.

  • IC / 2: Elec Electric
  • Envergadura 1400.00
  • Length(mm) 925.00
  • H-King Bixler am Hang
  • Hobby King Bixler in Lanzarote Richtung Famara
  • Bixler 1 1 Leitwerk abnehmbar machen
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Philip | Comprador Verificado

  • Overall
  • Quality
  • Value

Love it

Aug 12, 2023

I really like this plane. The one thing that I had to do to get the CG right was to use a 3000mah 3S as far forward as possible. I will buy a Bixler 3 next, just for the landing gear option

Alexander | Comprador Verificado

  • Overall
  • Quality
  • Value

26.07.2022

Jul 26, 2022

Das teil macht richtig spaß , Preis Leistung passt .

Test | Comprador Verificado

  • Overall
  • Quality
  • Value

Bixler

Jun 14, 2022

alles gut

Flyboy | Comprador Verificado

  • Overall
  • Quality
  • Value

Good basic glider

Apr 16, 2022

The Bixler is a great little glider and a good value for the price. Just don't expect too much from it. Motor is a bit underpowered and it will do some loops and rolls but be careful. ESC tends to get very hot with a 10 minute flight on a 3S 2200 mAh battery even going fairly easy on the throttle. I had one ESC burn up and damage the plant. I think HobbyKing needs to upgrade the ESC.

jenő | Comprador Verificado

  • Overall
  • Quality
  • Value

could be stronger

Apr 05, 2022

poor wing grip

Taz | Comprador Verificado

  • Overall
  • Quality
  • Value

Bixler 1400mm Glider

Mar 25, 2022

This is an awesome hand launch design. The motor really puts out some torque and gear placement is so very easy and well thought out. However; 30 Amp ESC or not, that thing is going to cook if there would be no more ventilation! So, I drilled a 1/2" hole in the front of the nose and another just south of the prop at the base of the pylon. This causes cooling air to ram into the fuselage and be sucked out below the pylon by the vacuum cause by the prop! Now, once the glider is in glide mode there is no vacuum; however, there is still ram air into the nose so if you would want to leave the servo adjusting hatch (just below the T.E. of the wing off, that may offer extra cooling force. I really liked the design of the tail where you glue the horz. stab down first then the vert stab after. It makes adding the empennage so much easier that way then trying to glue both at once! Lastly, I cannot give it a 5 star quality because mine came with the wings loose in the box and the underside of my right wingtip was forced upward, cracking the foam so that I had to repair it. The tips are curved upward, which I think is a really good design drag-wise, but having to impregnate the foam with foam-safe glue then add clear tape as reinforcement brings it down a star for me... I say, Hobby King-be sure to secure the wings next time and I'm sure you'll have a 5 star wonder on your hands from now on!

lorenzo | Comprador Verificado

  • Overall
  • Quality
  • Value

A model for every condition

Feb 21, 2022

This plane is perfect for every weather condition and any type of surface.

James | Comprador Verificado

  • Overall
  • Quality
  • Value

Powered Glider build review...

Feb 09, 2022

just as BRIFLY explained in his review; the design does not get any airflow through the fuselage and the wing bolts are not easily if at possible to drive them through to their tie-down location. This is how I solved for both design flaws... I punched a 7/16" hole in the absolute nose of the plane then lined it with plastic tube for smoothness. Next, I drilled another 7/16" hole angular from the fuselage to the base of where the pod and the fuselage meet on the outside; the vacuum caused by the prop and/or airflow over the surface of the fuselage will help draw the cooling air through the fuselage and out the rear at the prop. You will notice that there is a magnetic hatch for servo access at the bottom of the fuselage under the pod location. You can see where the plastic tube enters the fuse and exits at the base of the pod, to further cool the components inside the fuselage you can leave that hatch off if you like. I placed a 2200/50C Lipo at the forward most bottom location so the air coming into the fuse nose will pass over the battery first, then through the fuselage. Personally, I think this is a wonderful design with the prop off ground level and protected and the design of the wing, fuse and empennage are all well done and conducive to great control surface throws with minimal binding, if any.

CruzerDude | Comprador Verificado

  • Overall
  • Quality
  • Value

Great glider

Jan 14, 2022

The Bixler is a great motor glider and it is a great value for the money. Nevertheless, I think the wing construction is lacking. The two screws that attach the wing to the fuselage don't match up very well and it takes a lot of time to get the screws to finally fit into the fuselage.
Furthermoe, the small wood rings that hold the wing in place are very weak and it only takes the slightest stress for them to rip loose and break. I think the wing attachment design is a poor design and should be improved
.

Christian HOTTERMAN | Comprador Verificado

  • Overall
  • Quality
  • Value

Bon rapport qualité - prix

Dec 18, 2021

Pas encore testé en vol mais difficulté à monter les ailes: les perforations pour les tiges de blocage ne sont pas alignées. Nécessité de reforer les passages de tiges dans les renforts en bois.

Arquivos de clientes
manuel en FR Download [0]
BIXLER_BAVARIA_SPRING_01.jpg Download [3]
BIXLER_BAVARIA_SPRING_03.jpg Download [5]
BIXLER_BAVARIA_SPRING_04.jpg Download [3]
BIXLER_BAVARIA_SPRING_05.jpg Download [3]
BIXLER_BAVARIA_SPRING_06.jpg Download [3]
BIXLER_BAVARIA_SPRING_07.jpg Download [3]
Danmark_2019_Bixler_01_01.jpg Download [138]
Danmark_2019_Bixler_01_02.jpg Download [165]
Danmark_2019_Bixler_01_03.jpg Download [98]
  1. 1
  2. 2
  3. 3
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios