Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

H550 V1 Glass Fiber Hexcopter 550 milímetros Moldura

Generating Links

H550 V1 Glass Fiber Hexcopter 550 milímetros Moldura

Preço:

Now save economize 0,00 € 0,00 €

20,41 €
Enviado de:
  • USA
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
297000030-0
Envio Grátis? Clique aqui aprender mais!

O H550 V1 é um bem pensado quadro de 550 milímetros hexcopter construído a partir de materiais de qualidade. A estrutura principal é a fibra de vidro, enquanto os braços são construídos a partir de nylon de poliamida ultra durável.

A montagem é uma brisa com mangas pré-threaded latão para todos os parafusos de quadros, portanto, não lock-nozes são obrigatórios. Ele utiliza um tamanho de parafuso para toda a construção, tornando o hardware muito fácil de manter em ordem e só requer um tamanho de chave sextavada de montar.

A capacidade de elevação adicional de uma configuração hexagonal torna este quadro ideal para transportar cargas maiores, como sistemas de câmeras e outros componentes eletrônicos. Isto faz para um equipamento de câmera excepcional ou simplesmente um quadro multi-rotor muito ágil e poderosa para acrobacias!

O H550 também possui braços coloridos (3 brancos e 3 vermelhos) que são grandes para orientação. Ela ajuda a mantê-lo voar na direção certa, sem a necessidade de diferentes adereços coloridos.

Nós oferecemos uma linha completa de produtos eletrônicos multi-rotor, como o controle multi-rotor bordo, ESC & motores. Nunca foi mais fácil ou mais acessível para obter um quad no ar!

Características:
Construído a partir de fibra de vidro de qualidade e nylon poliamida.
Pré-threaded mangas de latão para todos os parafusos de frame.
braços coloridos para orientação para mantê-lo voando na direção certa.
guias de montagem grandes na placa quadro inferior principal para a montagem fácil câmera.
Ideal para o transporte de cargas maiores, como sistemas de câmeras e outros componentes eletrônicos.
Fácil montagem.

especificações:
Largura: 550 milímetros
Altura: 55 milímetros
Peso: 460g (w / out do sistema eletrônico)
Buracos Motor Mount parafusos: 16 / 19mm

Requeridos:
6 x 28 milímetros 1000 ~ 1200KV (ou tamanho semelhante / kv)
6 x 15 ~ 25 Amp ESC
6 x 8x4 ~ 10x4.5 Prop (3CW & 3CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 2200 ~ 3000mAh 3s 11.1v Lipoly Bateria

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

PageDM | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

First thing I noticed out of the box is the arms are not bright red, they are maroon/purple and the white ones are more off-white, not that it really matters but definitely doesn't look as clean as the one pictured, this could be a one off run perhaps with bad colours. The arms seem a little flexible on the twist axis, would shouldn't be a show stopper if motors and props are balanced. Otherwise it fits together well, at first I thought the screw holes were not quite lined up but if you start all the screws before fully tightening it comes together really well. As with most HK hardware, if you have a good quality set of hex drivers and don't over tighten the screws are fine. The edges of plates are sharp and will cause problems with wires so best to sand those down a bit with a dremel or something and seal the edges with CA. After saying all of that we are talking about a mere $20 frame kit, which is amazing value when you think $20 bucks barely buys dinner these days. 4 stars instead of 5 only because the colours don't match :)

MrMarek | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2014

Nice Frame. The colours of the arms are not pretty, but for 20$ is that OK. Cheap and nice Frame for easy building of the Hexacopter.
I did and I'm happy with. Resistant plastic, low cost replacement ans compatibility to the 450 size quadframe. Some seconds Video of my copter here
<object width="300" height="169"><param name="movie" value="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/l_3gYlmv8Rw?hl=de_DE&version=3" type="application/x-shockwave-flash" width="300" height="169" allowscriptaccess="always" allowfullscreen="true"></embed></object>

Mario | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 03, 2013

In erster Linie ist es ein gutes Produkt.
Es erfllt Sinn und Zweck zu einem guten Preis.
ABER: In der Artikelbeschreibung sind die weien Arme wei und die roten Arme richtig ordentlich rot. Die Realitt sieht da leider anders aus. Die weien Arme sind traurig grulich und die roten Arme sind sehr dunkelbraun. Absolut hsslich kann man nur sagen!
Das sollte unbedigt gendert werden. Es kommt einem vor, als wrde alles aus willkrlich zusammengemischten Recyclingresten mit zu wenig Farbstoff bestehen.
Sehr enttuschend.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 25, 2013

Very strong arms. I use it for spares in my dead cat.

Bakerman | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 13, 2013

good quality but the arms are brown and white!

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 20, 2013

Nice Frame, decent quality.

awsome1 | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 11, 2013

Cheap cheap cheap and easy to build and fairly rigid can put all your stuff in it and place the lipo on top

Evil Pusher | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2013

Kit from the europan warehouse was delievered whit brown arms. Perhaps it is an joke for german buyers (if you understand, what i mean) 8-)))) lol. The quality itself is acceptable, but not great - okay for the price

__HaKK | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 03, 2013

nice and cheap kit that does nto have too much flex, also good for spare arms as arms are not sold separately

lolo59 | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 30, 2013

quality is ok for the price nice for spare part in case of crash for 3D fly ^^

  1. 1
  2. 2
  3. 3
Arquivos de clientes
brown arms Download [62]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios