New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

hexTronik 16gram Brushless Outrunner 1700kv

hexTronik 16gram Brushless Outrunner 1700kv

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

8,84 €
Estado:
Disponível
SKU:
HXM2211-1700
WANT FREE SHIPPING? Click here to find out more!

outrunner brushless pequeno.

Kv: 1700rpm / v
Peso: 16 g
Voltagem: 7.4V (2 células Lipo)
Atual: 6A
Hélice sugerida: 8x3.8
Thrust: 300g +

  • SKU HXM2211-1700
  • Brand hexTronik
  • Peso 45.0000
  • Comprimento 65.00
  • Packaging Width 40.00
  • Altura 40.00
  • Kv ( rpm / v ) 1700.00
  • Correntes Max (A) 6.00
  • Resistência (MH ) 0.39
  • Max Tensão ( V) 13.00
  • Potência (W) 60.00
  • Shaft A ( mm) 2.00
  • Comprimento B (mm) 24.00
  • Diâmetro C ( mm ) 22.00
  • Pode Comprimento D (mm) 8.00
  • Comprimento Total E ( mm) 33.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Perfecto equilibrio peso-empuje.
No encontrareis un motor de este tamaño que tire tanto.
Algo delicado, recomiendo proteger el bobinado con epoxi

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfecto equilibrio peso-empuje.
No encontrareis un motor de este tamaño que tire tanto.
Algo delicado, recomiendo proteger el bobinado con epoxi

Bu motoru 200gr 3d i?in ald?m, denedikten sonra fikrimi yeniden yazaca??m.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bu motoru 200gr 3d i?in ald?m, denedikten sonra fikrimi yeniden yazaca??m.

We use them for our the shockys of our kiddies in the club. Nice little motors and reliable. Recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

We use them for our the shockys of our kiddies in the club. Nice little motors and reliable. Recommend.

Great little motor! Running it with an HK 6amp esc / .5a ubec and a 350mAh 2c 25s lipo. Plenty of power for my 135 gram mini FFF eagle with a 28 inch wing. Good fun!!!
Check XXXTechRC on YouTube for flight video.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little motor! Running it with an HK 6amp esc / .5a ubec and a 350mAh 2c 25s lipo. Plenty of power for my 135 gram mini FFF eagle with a 28 inch wing. Good fun!!!
Check XXXTechRC on YouTube for flight video.

bom motor para pequenos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bom motor para pequenos

Just tested this for my 90cm cessna. It pulls 240g static on my bench and the setup is as follows: Turnigy 2S Nanotech 370mAh, Plush 6A ESC, GWS EP-7035, unbalanced and wobbly. Still a solid 230g with the speed controller getting warm to the touch. I think while flying the current will be less because the prop won't be stalling so much as on my bench. Very nice little motor! I think I weighed it around 18g. The wires look brittle so solder them and leave them be.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just tested this for my 90cm cessna. It pulls 240g static on my bench and the setup is as follows: Turnigy 2S Nanotech 370mAh, Plush 6A ESC, GWS EP-7035, unbalanced and wobbly. Still a solid 230g with the speed controller getting warm to the touch. I think while flying the current will be less because the prop won't be stalling so much as on my bench. Very nice little motor! I think I weighed it around 18g. The wires look brittle so solder them and leave them be.

put on 210grams ready to fly low wing plane, with 610 rino lipo 2 cel and 12 amp turnigy ESC and 7x3 gws DD. she flies great, cold all time, no vertical, but very fast.
The winding is to loose!!! maybe think to rewind

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

put on 210grams ready to fly low wing plane, with 610 rino lipo 2 cel and 12 amp turnigy ESC and 7x3 gws DD. she flies great, cold all time, no vertical, but very fast.
The winding is to loose!!! maybe think to rewind

During bench test on 3S, a small wire burnt. No reparation possible. A bit disappointed.

The hex screw for the support goes with a 1.5mm wrench. The screw holding the shaft is for a 0.7mm wrench! Difficult to find!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

During bench test on 3S, a small wire burnt. No reparation possible. A bit disappointed.

The hex screw for the support goes with a 1.5mm wrench. The screw holding the shaft is for a 0.7mm wrench! Difficult to find!

tres bon moteur, mis sur cone 20mm axe de 2mm avec helice 8X4.5, et accus de 2s en 370mah lipo pour motoriser un canary ,cest le moteur quil faut pour ce planeur

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tres bon moteur, mis sur cone 20mm axe de 2mm avec helice 8X4.5, et accus de 2s en 370mah lipo pour motoriser un canary ,cest le moteur quil faut pour ce planeur

Great motor when it is work, wound with horrible wire, bought two and both of them broke on their own. ( i got them both on a pusher flying wing, both wire were glue down with hit glue and both of them break in several places )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor when it is work, wound with horrible wire, bought two and both of them broke on their own. ( i got them both on a pusher flying wing, both wire were glue down with hit glue and both of them break in several places )

Customer files
hexT 16g 1700 Download [1736]
hexT 16g 1700 Download [1736]
hexT 16g 1700 complete Download [2583]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!