New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

hexTronik DT1000 Brushless Outrunner 1000kV

hexTronik DT1000 Brushless Outrunner 1000kV

Discontinued Product

Please continue searching for a similar product.
SKU:
413000003
WANT FREE SHIPPING? Click here to find out more!

As aparências enganam. Este outrunner é cerca de duas vezes o tamanho de um motor TowerPro sino, e balança um suporte muito maior. Seu motor usado em alguns de Arte-techs novos kits de avião, que é testiment à sua durabilidade, facilidade de uso e qualidade.

Spec.
Voltagem necessária: 11.1v
Max consumo de corrente: 35A
Potência máxima: 500W
Sem carga atual: 1.2A
Shaft: M4 (perfeitamente adequado para Towerpor / GWS SF adereços Fly Lento)
Peso: 115 g
Diâmetro: 41 milímetros
Comprimento total: 66 milímetros
Kv: 1000rpm / v
Vem com montagem, como mostrado na imagem

Teste prop
Prop Tamanho Tensão Ampere Thrust
11x9 três lâmina 11.1V 20A 1200g

  • SKU 413000003
  • Brand hexTronik
  • Peso 140.0000
  • Comprimento 80.00
  • Largura 60.00
  • Altura 65.00
  • Kv ( rpm / v ) 1000.00
  • Correntes Max (A) 35.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 12.00
  • Potência (W) 500.00
  • Shaft A ( mm) 4.00
  • Comprimento B (mm) 33.00
  • Diâmetro C ( mm ) 41.00
  • Pode Comprimento D (mm) 13.00
  • Comprimento Total E ( mm) 66.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary

I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.

???? ??? ? ??? ??? ???

?? ?? ?????

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

???? ??? ? ??? ??? ???

?? ?? ?????

good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more

I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.

Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).

Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.

this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .

my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor

I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!