Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

HGD digitais 260HB CarbonGear Servo 16g / 0,12 / 2,0 kg

HGD digitais 260HB CarbonGear Servo 16g / 0,12 / 2,0 kg

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
51 g
SKU:
HGD-260HB

Combine

essential items and
acc
Descrição
do

HGD Digital Servo 2,0 kg
Made in Korea, a gama INO-LAB dos servos oferecer excelente qualidade, precisão e confiabilidade.
Alta precisão, exatidão digital e vida longa tornar esta uma excelente escolha para pequenos folhetos 3D.

Características;
Alta velocidade
Engrenagens de carbono.
apoio rolamento de esferas
Excelente para panfletos parque e shockflyers.
dissipador de calor de liga permite o arrefecimento potenciômetro e motor.

Spec.
Velocidade: .12sec / 60deg
Stall Torque: 2,4 kg
Dinâmico: 2,0 kg
Peso: 16,9 g
Tamanho: 38x30x13mm

Product
Specifications

Características do Produto

  • SKU:
    HGD-260HB
  • Brand:
    N/D
  • Peso ( g )
    51.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Speed ​​( Sec / 60deg )
    0.12
  • Torque ( kg) ( min. 0,01 kg )
    2.00
  • Unit Weight (g):
    16
  • A ( mm ):
    39.00
  • B (mm)
    31.00
  • C ( mm )
    32.00
  • D ( mm ):
    14.00
  • E ( mm):
    41.00
  • F ( mm )
    20.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Had a nasty crash with these that bent the pitch arms on an RJX head threw both links off never to be found and bent the aileron and rudder links, broke off the tailboom and snapped off the battery tray off. Two of them had gears with bent, but not stripped, teeth after this. They were still functional but felt "gritty". The gear that was damaged was the lower middle gear in both cases, all other gears were undamaged. Replaced them with HG-D261 gears (exact same gear set is used by both servos)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using these as cyclics in a 450 sport with the Tarot modified upper frame panels for midsized servos. You have to mount them on the inside to get straight links, elevator link will also be crooked (don't waste time trying to mount the elevator servo on the inside to get a straight link, it'll still be crooked and you'll have wasted 4 hours tearing the helicopter's back end apart and putting it back together again). Can't use the eyelets if you use them for this because they wobble too much. I used the rubber grommet and an M2x10 screw from the outside with an M2 washer and a nut behind the tabs. hold the nut and turn screw till the washer and nut touch the gromet, then let it go and turn the screw alone and friction will tighten the nut and hold the servo securely but self limit the torque so it won't damage the mounting tabs. Using these with te RJX clone head and a Robird G31 and they work great, the amount of torque they put into the blades is amazing for a 450.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bad luck with these servo's , 2 pieces , both with defective electronics.
InoLab have clearely no quality control .
InoLab never again !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Customer really can't make an intelligent decision from Hobby City's published data, or customer feedback with no credibility. Therefore, one must rely on manufacturers's supoort. This is where Ino Lab fails miserably, trying to market their product without letting customer know what they're buying into.

I would never consider thier product for this reason, even if product was free for I'm also charged with exhorbitant shipping cost from Hobby City. Worst experience I've encountered.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You can use the spare gear from the robbe fs 550 speed carbon digital servo.It fits 100 to HGD digital 260HB servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These servos are just awesome . I am using 6 of them in my EFlite ultrastick 25e , centre excellent and I have had no issues whatsoever even with a life reciever pack delivering 6.6v no issues. I have ordered more and will continue with inolab thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
really great servo, really smooth and powerfulll
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recomended for 450 size helis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In Normal Servo mode, it's fine. I was hopeing to take advantage of the "Digital" performance but I may need to try another Gyro capable of digital servos to see if it isn't my gyro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The servo ears did not fit perfectly on this heli though, but with a little trick and common sense, one can fix the problem quite easily.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.