Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)
  • USA

HK-500 Gt 3D elétrico Kit de helicóptero (incl. Lâminas e extras)

HK-500 Gt 3D elétrico Kit de helicóptero (incl. Lâminas e extras)

QTY:

Now save guardar 0,00 € 0,00 €

59,84 €
Stock:
Peso:
1892 g
SKU:
HK500GT

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Descrição
do
O alto desempenho HK-500 Gt é o vôo 3D pronto.
99% das peças são compatíveis com o Align T-Rex 500
Muito maior do que isto "é menor 450 irmão, o 500 Gt é um helicóptero emocionante ver em ação e ainda mais emocionante para voar. É 'cabeça de liga de 2024 garante núcleo duro pilotos 3D não ficará desapontado no desempenho e da cumeeira lindamente pintado e titânio anodizado componentes fazem deste um helicóptero visualmente deslumbrante com o desempenho para apoiá-la!
Você não vai encontrar unecissary ou mal encaixe ' "bling" componentes de liga leve' neste heli. Um monte de pensamento foi colocado em produção desta máquina como visto pelo * cauda FRN que usa a liga apenas quando a sua necessidade; nos braços e polia da correia parcialmente escondido tornando-o mais leve sem sacrificar a força; provando o heli 'há-bling todo-o desempenho atitude.
Todas as peças são 100% compatível com T-Rex 500
Incluem-se principal e de cauda lâminas e suportes de boom fibra de carbono.
Clique aqui para peças e upgrades.
Nós garantimos que você não vai encontrar um heli melhor preço desta qualidade em qualquer lugar!
Características.
design leve proporciona um desempenho de vôo incrível e capacidade 3D extremo.
cabeça do rotor / cauda com rolamentos axiais.
ligação Direct-to-oscilante CCPM.
Centro de gravidade da bandeja de bateria projetada perto da cabeça do rotor.
cinto de alta eficiência conduzido cauda.
sistema de rotação automática da cauda totalmente conduzido.
montar cauda servo crescimento.
Fibra de Carbono hastes de suporte de som.
Alta rigidez 2.024 liga quadro principal.
Especificação:
Comprimento: 840 milímetros
Altura: 310 milímetros
Diâmetro do rotor principal: 970 milímetros
Diâmetro do rotor da cauda: 200mm
Pinhão Motor: 13T
Engrenagem de transmissão principal: 162T
Engrenagem da movimentação da cauda: 31T
Conduzir relação de transmissão: 1: 12,46: 4,68
Peso (sem sistema de energia): 1370g
Peso do vôo: Aprox 1700g
Itens necessários.
Brushless Outrunner Motor
Servos: Ver itens relacionados abaixo.
Rádio Caixa de velocidades: Gyro / Rx
ESC: 80A ou superior.
Bateria: 2 x 2200mAh 3S 20C ou superior.
* FRN Fibre Reinforced Nylon
25% mais leve que liga tarugos e composto por 30% de fibras de carbono e aramida misturado com Nylon. Este fornece força (módulo de elasticidade), onde plásticos padrão e 2017 ligas iria dobrar.
Product
Specifications

Características do Produto

  • SKU:
    HK500GT
  • Brand:
    N/D
  • Peso ( g )
    1892.00
  • Comprimento
    545.00
  • Largura:
    115.00
  • Altura:
    240.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I purchased two of these recently and I'm glad I did it looks like I might be able to make one good one out of the two. The first kit had a scratched up chassis and the canopy was slightly cracked, but the moving parts all seem to be in good shape. The second kit had a better chassis, but the canopy was cracked severely and the main rotor has all sorts of weird motion; I suspect the links aren't set up correctly. This puts a real damper on the purchase; I kind of wish I hadn't bought these.
Quality
Value
Overall
Quality
Value
Overall
Had to replace all screws with higher quality screws. Main shaft was bent, but repairable. Oblong main gear also replaced. Fly's well.
Quality
Value
Overall
Quality
Value
Overall
don't like this kit at all utter rubbish don't bother with it you will be gutted just not worth all the hassle getting it right to fly.just bin it utter waste of money they need tarots 500 in stock the quality of them is unbelievable much better all round. got one and flies like a dream.
Quality
Value
Overall
Quality
Value
Overall
This is quite good for the price, however there's a few things you must pay attention to.

The screws are very soft and strip easily if you tighten them down too hard. The tail hub that comes with these is downright dangerous, don't use it, even the upraded metal one from hk also came without thrust bearings and almost came apart. Get tarot or align blade grips and hub. Also get CF servo mount, and metal mixing and washout arms,

You'll also want an align main gear as the one that comes with it is out of round.

For the prices it's definately worth your while if you're willing to work with all the smaller problems. The frame, shafts, and parts over all are pretty good. You'll be happy with the end result after putting in some time.
Quality
Value
Overall
Quality
Value
Overall
this hk500 helicopters or utter crap.don't bother with them they cost you more in the long run rather buy align and be done with.i've learnt my a lesson.hobbyking need to redesign this completely.need to upgrade all the parts like the tarot kits
Quality
Value
Overall
Quality
Value
Overall
great heli, more than happy. the size is a major increase from the 450 which surprised me.
as previously stated, don`t forget to ground your tail boom for static lockout reasons caused by the friction in the belt.
Quality
Value
Overall
Quality
Value
Overall
wow aselole heli mak nyuss pokoe siapa cepat dia dapat
Quality
Value
Overall
Quality
Value
Overall
Still waiting for my hk500=(.. a jit item so maybe the horse broke a leg..
Anyways, my plan is

2300kv 3660
60a esc
13t pinion
14,8v

hs with 10pcnt off= 2400..ish

with 4s a123=2200...ish
Quality
Value
Overall
Quality
Value
Overall
Built my HK-500. When taking the bits out of the box I was pleasantly surprised at the amount of metal parts in this kit. So initial impressions were good, all parts looked to be pretty well made, especially for this budget model. Canopy is horrid, but I knew that before purchase.

I had 'proper' align rear gearbox and head in my spares box, so decided to use these over the HK ones; the HK ones actually looked pretty good, but using my spare Align bits was all part of my plan when buying this kit.

Whilst I had the Align rear gearbox, I did use the HK rear blade grips, blades and tail slider as I didn't have align versions of those.

The kit went together well - time for a test-flight.

WARNING WARNING WARNING - my plastic rear blade grip exploded on the first flight (throttle set at ~70pcnt -> 1600kv motor, 6S, kit supplied pinion).

Thankfully the model was close enough to the ground that the catastrophic tail failure didn't end in total loss of the aircraft (obviously some damage that I need to fix). But more worryingly the exploding tail fragments hit my friend - luckily it didn't result in serious injury, but a few inches higher and they would have hit him in the face! He was ~5M away from the model by the way, so not irresponsibly close.

So, I might just have got the one and only unlucky one, but please consider the above when you use your HK-500 - especially for the f
Quality
Value
Overall
Quality
Value
Overall
it's flying well at the moment. adjust the tracking off the blades it got a little vibration through.apart from that it flaying rock steady.love it
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.