Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

HK15322MG Digital Magro Asa Servo 1,75 kg / 0.10sec / 19g

Generating Links

HK15322MG Digital Magro Asa Servo 1,75 kg / 0.10sec / 19g

Preço:

Now save economize 0,00 € 0,00 €

10,33 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9225000001
Envio Grátis? Clique aqui aprender mais!
HK15322 Digital Magro Asa Servo 1,75 kg / 0.10sec / 19g

especificações:
Torque: 1,5 kg / cm @ 4.8V, 1,75 kg @ 6.0V
Peso: 19g
Velocidade: 0,12 / 60deg @ 4.8V, 0,10 / 60deg @ 6.0V
Voltagem: 4.8V ~ 6.0V
Tipo de arte: Metal
Rolamento de esferas: Dual
Ligue: JR Estilo
  • Servo Torque ( kg) ( min. 0,01 kg ) 1.75
  • Servo Speed ​​( Sec / 60deg ) 0.10
  • Servo A ( mm ) 30.00
  • Servo B (mm) 30.00
  • Servo C ( mm ) 27.00
  • Servo D ( mm ) 10.50
  • Servo E ( mm) 43.00
  • Servo F ( mm ) 14.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Alexandre | Comprador Verificado

  • Overall
  • Quality
  • Value

Work good but watchout

Jul 27, 2018

I juste receive 4 of them to use in an 2m70 glider.
They seem work fine, good torque, low noise, but the peak current at start is very high.
With four of them, a 5A bec is not enough.
After a quick movement the BEC voltage can drop, so the receiver reset.
Je viens d'en acheter 4 pour monter dans un planeur de 2m70.
Ils semblent bien fonctionner, bon couple, peu de bruit, mais le pic de courant est très élevé.
Avec quatre servos, un BEC de 5A n'est pas suffisant.
Après un mouvement rapide la tension du BEC peut chuter et le récepteur redémarrer.

Roland | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

bought 4 of them.... 1 did not work from the beginning... have a lot of Play in the gear... u get wat u pay for

Mike | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 07, 2014

Not impressed with these and will not use them. The 2degrees play in the output shaft is excessive. They jitter as soon as a slight force is applied (controller set for deadband that is less than the play?). Also treats pulses longer than 1.9ms as 1.9ms (but does respond down to 0.9ms (as do some other digital servos).

Mike | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 06, 2014

Not impressed with these and will not use them. The 2degrees play in the output shaft is excessive. They jitter as soon as a slight force is applied (controller set for deadband that is less than the play?). Also treats pulses longer than 1.9ms as 1.9ms (but does respond down to 0.9ms (as do some other digital servos).

Yuto Kang | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 01, 2014

I purchased 4 of these and put them on my servo tester and ran them until the batteries died. There was no glitching or stuttered movement. They ran perfectly. I will be putting them into an S4083 profile wing that's 1.5m. They fit much better than the servos I had in it originally.

Josh | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 31, 2014

The only thing bad I have to say is that the wires come out of the casing and have no rubber bushing to protect the wires from sharp edge of case. This will be a fatigue point, but nothing some silicone can't fix. Having no problem using 4 of them @ 6v and with two other analog servos in the mix.

SpeedsterDEN | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 16, 2013

I now use this servo in many gliders up to 2,7 meter span, for flaps and ailerons. No problems yet.

OLAF | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2013

Gut, stark und relativ genau. Sie "knurren" im Ruhezustand etwas.
Fr meine Nieuport 11 (49") tun sie aber ihren Dienst!

SpeedsterDEN | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 08, 2013

I use theese servos in a Arthobby Odessey 2,7 meter glider for flaps and ailerons. Working great. Will get more.

rsuarezn | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 26, 2013

Working smooth , drains 1.3 Amps when blocked .

  1. 1
  2. 2
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!