New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HKPilot 500mW Transceiver radiotelemetria Set V2 (433Mhz)

HKPilot 500mW Transceiver radiotelemetria Set V2 (433Mhz)

Shipped From:
  • USA
QTY:

Now save guardar 0,00 € 0,00 €

46,25 €
Estado:
Disponível
SKU:
387000077-0
WANT FREE SHIPPING? Click here to find out more!

Embalagem 500mW de potência de saída deste V2 433Mhz radiotelemetria Set permite que você conectar-se a um controlador de vôo, tais como o nosso mega HKPilot ou Multiwii AIO a um dispositivo USB ou Uart equipado como um computador, laptop ou tablet suportar uma conexão USB (OTG). Os novos rádios V2, já não têm um módulo ar / terra separada, como ambos os transceptores pode usar Uart ou conexões USB e suporta ambos os modos. A Rádio defina não só permite que você veja dados em tempo real, tais como a posição ao vivo GPS sobrepostos em um mapa, tensão do sistema, a posição, a navegação waypoint mesmo horizonte artificial e muito mais. Usando open source MAVlink software estação de terra com base, você pode até mesmo voar sua aeronave com um joystick via as configurações do computador e atualização ao vivo! Ou apenas usá-lo para seus projetos DIY que precisa de uma interface serial sem fio. Este kit oferece um ótimo preço baixo, maior alcance e desempenho superior. O sistema utiliza a banda de 433 MHz e fornece um link full-duplex usando módulos HM-TRP do HopeRF executando personalizados, de código aberto, de firmware.

Características:
• módulos de 433MHz ar intercambiáveis ​​e terrestres
• Micro-USB port
• conector Molex de 6 posições
• 500 mW de potência máxima de saída (ajustável)
• -117 dBm receber sensibilidade
• conector SMA
• comunicação de 2 vias full-duplex através de TDM adaptativa
• Interface UART
• link serial transparente
• MAVLink framing protocolo
• Spectrum Frequency Hopping Spread (FHSS)
• ciclo de trabalho configurável
• Correção de erro corrige até 25% de erros de bits
• Open-source firmware SIK
• configurável através Planner * Missão e * APM Planner

especificações:
Tensão de alimentação: 3.7-6 VDC (a partir de USB ou conector Molex)
Transmitir corrente: 500 mA a 27 dBm
Receba atual: 25 mA
Interface serial: 3.3 V UART

Incluído
Dois módulos de rádio com antenas
cabo micro-USB
cabo adaptador OTG Android
6-wire cabo conector Pixhawk
6-to-5-posição do cabo APM e PX4 conector
Auto-adesivo remendo

regulamentos de frequência variam em cada país, de modo a sua autoridade espaço aéreo local para descobrir qual frequência é legal em sua área.

Nota: A referência a APM refere-se ao projeto ArduPilot, uma família de pilotos automáticos de código aberto baseado na plataforma de computação open source Arduino, desenvolvido pela 3DR e da comunidade open source. Ele consiste de uma escolha de ArduPilot mega (APM) Eletrônica e uma gama de versões de software grátis para veículos diferentes e é regido por uma licença Creative Commons open source.

Nota: Este não é um produto de marca original Arduino.

  • SKU 387000077-0
  • Brand HKPilot
  • Capacidade ( mAh) -
  • Peso 125.0000
  • Comprimento 110.00
  • Largura 45.00
  • Altura 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This item is very badly designed, it will make a lot of perturbations especially on the video transmitter and the OSD. This happens even if you put ferrites and use a separate power supply for this module.
Also it drains too much current to be used as is on a Smartphone.

It is possible to decrease the input power in the settings but even at a power lower than 100mW it will still perturbates the OSD and the video emitter.

Avoid this device, with the 433MHz antenna from immersion RC and a dipole antenna on the ground you will reach >7km range with the 100mW version from 3DR without perturbating your other transmissions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This item is very badly designed, it will make a lot of perturbations especially on the video transmitter and the OSD. This happens even if you put ferrites and use a separate power supply for this module.
Also it drains too much current to be used as is on a Smartphone.

It is possible to decrease the input power in the settings but even at a power lower than 100mW it will still perturbates the OSD and the video emitter.

Avoid this device, with the 433MHz antenna from immersion RC and a dipole antenna on the ground you will reach >7km range with the 100mW version from 3DR without perturbating your other transmissions.

I'm getting 3km range with these radios with stock antenna on air radio and dipole on ground station! really great radios at a fantastic price!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm getting 3km range with these radios with stock antenna on air radio and dipole on ground station! really great radios at a fantastic price!!

First set worked for 2 days (ground testing), then one unit stopped working. HK replaced it swiftly. Second unit is working so far, but I suspect they draw too much power for all my android devices, and as a result, dont work on android. Ive had it working once for a short while, but more typically they dont even power up on the OTG cable and if they do, sometimes my phone/tablet will instantly shut off. Tried many OTG cables, 3 different android tablets/phones. I worked around it by connecting a bluetooth module to the radio, and powering those separately, then connect via bluetooth. Setting the tx power in Mission Planner doesnt seem to work. Build quality is mediocre, the case isnt even held together with screws and comes apart too easily. Cutouts for the connectors are a bit small, and connectors can fall out. Nothing you cant solve with some hot glue and tape though. Range not tested so far, but probably excellent based on ground testing results. Oh, and beware, servo's dont like these radio's, you have to keep this unit well clear from servo wires or they will go beserk.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First set worked for 2 days (ground testing), then one unit stopped working. HK replaced it swiftly. Second unit is working so far, but I suspect they draw too much power for all my android devices, and as a result, dont work on android. Ive had it working once for a short while, but more typically they dont even power up on the OTG cable and if they do, sometimes my phone/tablet will instantly shut off. Tried many OTG cables, 3 different android tablets/phones. I worked around it by connecting a bluetooth module to the radio, and powering those separately, then connect via bluetooth. Setting the tx power in Mission Planner doesnt seem to work. Build quality is mediocre, the case isnt even held together with screws and comes apart too easily. Cutouts for the connectors are a bit small, and connectors can fall out. Nothing you cant solve with some hot glue and tape though. Range not tested so far, but probably excellent based on ground testing results. Oh, and beware, servo's dont like these radio's, you have to keep this unit well clear from servo wires or they will go beserk.

Customer files
Telemetry Radio Setup Download [2]
Setup Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!