New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Placa de distribuição passatempo Rei Quadrotor Poder

Placa de distribuição passatempo Rei Quadrotor Poder

Now save guardar 0,00 € 0,00 €

5,14 €
Already Purchased
Estado:
Indisponível!
SKU:
9171000033
WANT FREE SHIPPING? Click here to find out more!

Projetado em casa pela HobbyKing Enginerds, esta placa de distribuição de energia útil tem a mesma impressão do pé como os nossos quadros de comando Multri de rotor e é a solução definitiva para a fiação de distribuição de energia arrumado. Basta usar 3,5 milímetros conectores macho em seus CES e conecte uma bateria. O PCB é banhado a ouro para a eficiência optimality e também possui uma porta que bling (aka 2 pin tamanho JST alimentação auxiliar out) Perfeito para LEDs que alimentam ou qualquer acessório instalado no seu Quadrotor .

Características.
Atual: 4 x 20A Saídas (MAX)
Entrada de alimentação: XT60 com fio 12AWG
Saída do motor: 4 x 3,5 milímetros Feminino ficha de bala
Saída Aux: 2 pin JST compatível
Peso: 27,3 g (incluindo fios)

 

  • SKU 9171000033
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 38.0000
  • Comprimento 120.00
  • Packaging Width 6.00
  • Altura 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A little bigger than the photo shows. It's 10 cm X 10 cm or something near to that.

The power in cable seems fragile because it's a 90 degree connection. I believe it can handle more then 80A, something like 90 or 100A for some seconds.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A little bigger than the photo shows. It's 10 cm X 10 cm or something near to that.

The power in cable seems fragile because it's a 90 degree connection. I believe it can handle more then 80A, something like 90 or 100A for some seconds.

Works great! Clean Install!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great! Clean Install!

perfect distribution board for 250 racer drones

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect distribution board for 250 racer drones

perfecto para mi quad copter y muy limpia coneccion electrica

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfecto para mi quad copter y muy limpia coneccion electrica

good materials, simply and easy to assembly. it's a good and valid product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good materials, simply and easy to assembly. it's a good and valid product!

This a need for a quadcopter. Very good quality

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This a need for a quadcopter. Very good quality

this board is really helpful and good quality for its price. also the female bullet plug are not centered on each side which might cause problems for some people.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this board is really helpful and good quality for its price. also the female bullet plug are not centered on each side which might cause problems for some people.

After I installed this product in my Quad with nylon bolts and rubber mounts I found it was leaking nearly 4 volts into the aluminium frame. After taking it of the frame I found it was leaking volts through the rubber pad on the bottom of the board. Who has heard of rubber passing electric current, that pad is there to stop this happening. Don't buy until they use a better rubber product. If you have already installed this in a Quad my advice is to check for voltage leak before you fly again, these batteries do not like shorts. Albert.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After I installed this product in my Quad with nylon bolts and rubber mounts I found it was leaking nearly 4 volts into the aluminium frame. After taking it of the frame I found it was leaking volts through the rubber pad on the bottom of the board. Who has heard of rubber passing electric current, that pad is there to stop this happening. Don't buy until they use a better rubber product. If you have already installed this in a Quad my advice is to check for voltage leak before you fly again, these batteries do not like shorts. Albert.

Distributes power effectively without problems.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Distributes power effectively without problems.

ottima! la monto su tutti i miei modelli

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottima! la monto su tutti i miei modelli

Customer files
No File Name Download [974]
perfect for talon v2 frame kit Download [569]
No File Name Download [73]
Perfect for more Download [2223]
With XT60 connector Download [249]
Board With XT60 Good version 2 Download [987]
Board With XT60 Good version Download [749]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking