HobbyKing Donkey ST3007-1100kv Brushless

• Overall
• Quality
• Value

perfecting the Donkey

Mar 24, 2017

Mixed reviews for this product--mainly, I think, because of the bronze bushing rather than ball bearings. But there are two simple remedies. Cheapest and easiest is to remove the circlip, separate the rotor and stator and give the bushing a good slug of lube like Fluid Film (and repeat that as necessary. Alternatively, press out the 8mm o.d. bushing and replace it with a couple ball bearings (as shown in the pictures under the files tab). The bearings shown in the pictures are Hobby King part number, HK450V2, less than two dollars US for the pair. Also useable, and perhaps more durable, are bearings identified as L-840ZZ. Google that for several sources of cheap supply.

With either remedy, this motor is an obvious winner, an unqualified five crown quality product.

• Overall
• Quality
• Value

Customer Rated

Jan 08, 2016

Compre este motor porque HK lo daba como elemento para el el Sky Mule de Durafly, hoy lo recibo y no cabe en el canopy del Sky Mule y no coinciden los agujeros de sujecion. Me siento enganydo!!!!!!

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 24, 2015

Only motor. No connectors. Motor mount is already installed.

• Overall
• Quality
• Value

Customer Rated

Jun 20, 2015

great motor for the price but it doesnt have any bearings. so after using for some while ( about 1 minute) it starts to reduce the rpm because of tempreture. anyway price is really attractive : )

be sure you use this motor with well balanced prop and spinner if you use. i stucked one of them with none balanced spinner.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 18, 2015

used this for my fpv49 and i was speechless! what an incredible motor! great power! 5 stars

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 07, 2014

Powerfull motor and cheap.

Tested with 10x4.7 prop and it drains around 360W with Hobby King 40A ESC 4A UBEC

• Overall
• Quality
• Value

Customer Rated

Dec 14, 2013

Great motor, takes a beating! Used on a 40" fiberglass Lancair and had almost unlimited vertical! Used either a 7x7 or 8x8 with a 50amp birdie.

• Overall
• Quality
• Value

Customer Rated

Dec 14, 2013

Motor failed 3 minutes into first flight. Installed on a 3D profile park flyer with a 32 inch wingspan. Aircraft weighed 18 oz ready to fly. ESC was PSC1 30A. Battery was Zippy Compact 3Cell, 35C, 1000ma. Prop was 10 4.7 slow fly.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 25, 2013

Nem rossz motor, br nem hiszem, hogy az olyan eros.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 19, 2013

Motor is a realy donkey. 11x5.5 with 3S 1300Mha privides 210Watts. Motor slightly warm