HobbyKing dupla tempestade F3P Ultralite EPS interior 3D Biplane w / 850 milímetros Motor (KIT)

• Overall
• Quality
• Value

Customer Rated

Dec 08, 2014

Flight performance is good but slow rolls, and expected more brittle.

different from what is written in the box with the Web.

The spec is written in the box.
Wingspan: 780mm
Fuselage Length: 850mm
Motor: Brushless 2204 1700Kv Outrunner
Propeller:8043SF or 8040HD
ESC: 6-10Amp
Servos: 4-6g micro servo x 3
Battery: 7.4v 2S 250-450mAh Li-po
Flying Weight: 115-140g (Flight ready inc. Battery)

• Overall
• Quality
• Value

Customer Rated

Apr 11, 2014

Very good, light, fairly simple to build and great flying characteristics!

https://www.youtube.com/watch?v=7uEOFgJjAGc&list=UUlXevkn7INSuCmaK5TJQThA

• Overall
• Quality
• Value

Customer Rated

Sep 14, 2013

I absolutely love this airplane!! It is an amazing airframe. It can fly hardcore 3d or f3p at walking speed like its on rails. It fly's inverted with NO INPUT and knife edge flight is done with no coupling. It will do flat turns with no aileron input. I have the cg about 1/4" farther back then the recommended cg. I used the included (2202) motor, a Hobbyking blue series 12amp esc with the shrink wrap cut off and the motor wires directly soldered to the esc. My motor leads are about 1" long (this helps prevent timing issues as well as cuts a little bit of weight off) i used Hitec 5035 digital nano servos and a Spektrum AR6100 with the case cut off for a receiver. I am using a 2 cell 180mah 25-40c nano tech pack. I painstakingly built the airframe absolutely square (took about 3 hrs on just the airframe) and used the foam safe CA very lightly as i did not want to add too much weight from the CA. It dose not come with air-brakes, and the cabbain struts are not covered so I Mylared them to add the side force area. also the included servos arms are too short to be used as pull pull arms so I just used a set of Du-bro micro arms to get the appropriate length for a pull pull system. My true flying weight is 111 grams! this airframe makes me want to try the MXS-R or the Saturn f3p airframes. I urge caution when building or transporting the airframe as it is extremely delicate.

• Overall
• Quality
• Value

Customer Rated

Mar 15, 2013

how do i embed a you tube video onto hobby kins discussions or reviews page??
[youtube]sNTPc6wI2v4[youtube]

• Overall
• Quality
• Value

Customer Rated

Mar 09, 2013

Here's a flight video of this plane Just copy and paste this link to se it

https://www.youtube.com/watch?v=sNTPc6wI2v4

• Overall
• Quality
• Value

Customer Rated

Mar 05, 2013

Plane has arrived and It assembled. I got a chance to fly it outside in a bit of a breeze It flew well But doesn't like wind at all. Hovers and 3d flying is so easy it made me look like a instant expert. using a 10 amp esc and a 300 mah 2s pack. I assembled it with 5 minute epoxy I hate foam CA. It is under 140 grams flying weight. ridged???. Well I guess its a mater of what ridged means to you. Control surface flex easy and leading edge f wings flex if you breath on it to hard BUT it doesn't seem to effect its flight. Its very VERY delicate I doubt that it will last me long BUT I ill try to make it last It is very VERY nice little plane. I might try to make a protective box for it so it an last forever. That would make a big difference. for price and quality id say 5 an 5 toughness a zero But that's not in the rating choices If you want to fly easy champion like 3d inside or in no wind days buy this planes its excellent.