New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Hobbyking Katana 0,46 EP 1.400 milímetros (ARF)

Hobbyking Katana 0,46 EP 1.400 milímetros (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
KAT-46
WANT FREE SHIPPING? Click here to find out more!

Esta alta qualidade Katana foi construída para satisfazer ambos os pilotos 3D e precisão folhetos acrobáticas. Possui superfícies de controle enormes e uma asa de carga leve, a receita perfeita para algumas acrobacias radicais!

A qualidade de construção é bastante excelente e é ao mesmo tempo forte e leve, a cobertura é habilmente aplicado eo esquema de cores atraente é ideal para a orientação. O capô de fibra de vidro é bem pintados e leve para manter o peso voando baixo. O hardware fornecido é excelente e este modelo oferece uma construção fácil e rápida, devido à grande quantidade de pré-fabricação. Este kit inclui o hardware para ir com qualquer um brilho ou de construção elétrica, o que torna muito versátil. As asas são conecte como seria de esperar para fazer o transporte fácil e grande copa é de removível curso para a mudança fácil Lipoly.

Este Katana muito atraente oferece excelente desempenho no reccomended configurado tanto para o piloto 3D e o folheto esporte, os modelos da classe .46 são populares como eles voam como um avião grande escala, mas são relativamente baratos para construir e são muito práticos. Este Katana é o perfeito modelo de todos rodada para o intermediário a experiente piloto. Parece bom, voa grande, é prático e does not quebrar o banco!

especificações:
Envergadura: 1400 milímetros
Comprimento: 1310 milímetros
Voar Peso: 2250g ~ 2400G (com 0,46 motor)
Asa Área: 36g / dm2
Sugeriu Prop: 12x8 ~ 14x10

exige:
Sua própria 6 Canal TX / RX
.46 Brilho motor ou motor brushless equivilent
50 ~ 60A ESC (opção brushless para)
4 ~ 5 Servos
4 ~ 5S Lipoly


  • SKU KAT-46
  • Brand -
  • Capacidade ( mAh) -
  • Peso 4125.0000
  • Comprimento 1025.00
  • Largura 260.00
  • Altura 450.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ho acquistato questo modello circa una settimana fa, oggi l'ho collaudato e appena al secondo volo ho perso una semiala, l'aereo si praticamente disintegrato in volo, i materiali sono veramente scadenti in 15 anni di modellismo non mi mai capitata una cosa del genere, ho praticamente buttato 140 euro. ASSOLUTAMENTE NON VI CONSIGLIO QUESTO MODELLO e hobbyking non si nemmeno degnato di rispondere in chat ad una mia lamentela, sinceramente visto la pessima qualit dei materiali e visto il fatto che la rottura non assolutamente dipesa da me mi aspetto un rimborso.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ho acquistato questo modello circa una settimana fa, oggi l'ho collaudato e appena al secondo volo ho perso una semiala, l'aereo si praticamente disintegrato in volo, i materiali sono veramente scadenti in 15 anni di modellismo non mi mai capitata una cosa del genere, ho praticamente buttato 140 euro. ASSOLUTAMENTE NON VI CONSIGLIO QUESTO MODELLO e hobbyking non si nemmeno degnato di rispondere in chat ad una mia lamentela, sinceramente visto la pessima qualit dei materiali e visto il fatto che la rottura non assolutamente dipesa da me mi aspetto un rimborso.

Der Flieger ist absolut sein Geld wert. Er fliegt wie auf Schienen. Die Verarbeitung lsst bis auf einige kleine Risse in der Cowl nichts zu wnschen brig. Den kann ich beruhigt weiter empfehlen. Antrieb mit 6S 5000mA Motor 4250 540KV von HK.
Nimmt mit 5S 32A auf und mit 6S 5000mA max. 42A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der Flieger ist absolut sein Geld wert. Er fliegt wie auf Schienen. Die Verarbeitung lsst bis auf einige kleine Risse in der Cowl nichts zu wnschen brig. Den kann ich beruhigt weiter empfehlen. Antrieb mit 6S 5000mA Motor 4250 540KV von HK.
Nimmt mit 5S 32A auf und mit 6S 5000mA max. 42A

Arrived well packed and undamaged. Build quality is great as is the covering! Overall the plane feels very solid. Only drawbacks are that the cowl is very thin fiberglass and cracks easily, and there is no throttle servo tray, so be ready if you are going the glow route. I chose an O.S. .50SX for a powerplant so, we will see how she goes. More after maiden!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived well packed and undamaged. Build quality is great as is the covering! Overall the plane feels very solid. Only drawbacks are that the cowl is very thin fiberglass and cracks easily, and there is no throttle servo tray, so be ready if you are going the glow route. I chose an O.S. .50SX for a powerplant so, we will see how she goes. More after maiden!!

Flies like it is on rails. I haven't found a bad flight characteristic yet. OS 40 glow motor with Futaba radio gear and Corona receiver. Box was missing throttle servo tray and wing mounting bolts but that was easy enough to replace. Don't glue the elevator hinges onto the horizontal stab before you mount the stab.. it wont fit with it pre-glued! I found that out the hard way! Other than that an easy build.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flies like it is on rails. I haven't found a bad flight characteristic yet. OS 40 glow motor with Futaba radio gear and Corona receiver. Box was missing throttle servo tray and wing mounting bolts but that was easy enough to replace. Don't glue the elevator hinges onto the horizontal stab before you mount the stab.. it wont fit with it pre-glued! I found that out the hard way! Other than that an easy build.

Quality is ok for the price. Its no 3DHS plane, but it works. The flight characteristic are weird. It flys great straight and level, but when you go to pull out of something or recover from a blender, it really wants to snap over. If stalls as if it is tail heavy, but I don't think it is. If you have any ideas as to why it wants to snap when you pull out of maneuvers, please tell me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quality is ok for the price. Its no 3DHS plane, but it works. The flight characteristic are weird. It flys great straight and level, but when you go to pull out of something or recover from a blender, it really wants to snap over. If stalls as if it is tail heavy, but I don't think it is. If you have any ideas as to why it wants to snap when you pull out of maneuvers, please tell me.

AWFUL PRODUCT OF WHICH I PURCHASED 3. EACH LASTED 2 MINUTES!!!. THERE'S A MAJOR FAULT WITH THE DESIGH OR CONSTRUCTION.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

AWFUL PRODUCT OF WHICH I PURCHASED 3. EACH LASTED 2 MINUTES!!!. THERE'S A MAJOR FAULT WITH THE DESIGH OR CONSTRUCTION.

Hi, I love this little plane.

My setup is using an OS 55 nitro with a 13x4.5 Turnigy wooden slow fly prop. COG is as per manual. Has heaps of pull and flies nice and straight without any bad tendencies.

I fly IMAC and came 3rd in my class with this plane!

There are a few things to fix, first I swapped all the plastic clevises, I broke a few just looking at them. Next the tank is too small for a nitro engine and needed to be replaced with a larger tank (no issue for electric setup) The elevator joining section is too weak and needs to be reinforced. The landing gear mounting is a bit weak too (pulled that out on a bad landing because of the small tank)

Overall a nice looking little plane, a few things to fix but at this price you won't find any better. Good job HobbyKing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, I love this little plane.

My setup is using an OS 55 nitro with a 13x4.5 Turnigy wooden slow fly prop. COG is as per manual. Has heaps of pull and flies nice and straight without any bad tendencies.

I fly IMAC and came 3rd in my class with this plane!

There are a few things to fix, first I swapped all the plastic clevises, I broke a few just looking at them. Next the tank is too small for a nitro engine and needed to be replaced with a larger tank (no issue for electric setup) The elevator joining section is too weak and needs to be reinforced. The landing gear mounting is a bit weak too (pulled that out on a bad landing because of the small tank)

Overall a nice looking little plane, a few things to fix but at this price you won't find any better. Good job HobbyKing!

http://www.youtube.com/watch?feature=player_detailpage&v=kAbO9nnw70U
Plane flies great. Tacon Big Foot .46 670kv motor, 70amp ESC, HK17148B servos, 3700MAH 25C 4 cell Zippy Compact Lipo, 14x7 APC prop, and OrangeRC 6 chan RX.
Good quality hardware, tight covering, excellent wood builtup air frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

http://www.youtube.com/watch?feature=player_detailpage&v=kAbO9nnw70U
Plane flies great. Tacon Big Foot .46 670kv motor, 70amp ESC, HK17148B servos, 3700MAH 25C 4 cell Zippy Compact Lipo, 14x7 APC prop, and OrangeRC 6 chan RX.
Good quality hardware, tight covering, excellent wood builtup air frame.

Part 2 of review. Have completed model, and flies really well...BUT and it's a big but, on the second flight, in a level pass over the field, the entire left half of the horizontal stabiliser and elevator parted company from the fuselage.

It was only luck that this wasn't the side the servo was installed on, as the remains of the model made a perfect landing.

On examining the now dissembled detached half of the structure, it appears the only spanwise structure is a balsa leading and trailing edge.

I don't think this is strong enough. I will be removing the other side also, and scratch building a new structure using spruce not balsa and a 3mm carbon spar also.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Part 2 of review. Have completed model, and flies really well...BUT and it's a big but, on the second flight, in a level pass over the field, the entire left half of the horizontal stabiliser and elevator parted company from the fuselage.

It was only luck that this wasn't the side the servo was installed on, as the remains of the model made a perfect landing.

On examining the now dissembled detached half of the structure, it appears the only spanwise structure is a balsa leading and trailing edge.

I don't think this is strong enough. I will be removing the other side also, and scratch building a new structure using spruce not balsa and a 3mm carbon spar also.

Ordered from UK warehouse on Friday, delivered on Monday. Excellent service.

Build quality of the kit appears excellent. however, am part way through the build, and a number of small but annoying issues have appeared.

The bolts supplied to fix the control horns to the ailerons aren't long enough, I had to recess the back plate of the horn into the aileron in order to get the bolts to do up.

Also, the thickness of the control horn means the clevises won't stay clipped shut with out a silicon retainer made from some fuel tube, as none supplied.

And finally the wings have a metal retained captive bolt inside, to bind the wings to the fuselage, instructions mention 2 x 5mm plastic bolts, but these don't appear to be supplied either.

None of these are insurmountable problems, but they detract from what would other wise be a well fitted out plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered from UK warehouse on Friday, delivered on Monday. Excellent service.

Build quality of the kit appears excellent. however, am part way through the build, and a number of small but annoying issues have appeared.

The bolts supplied to fix the control horns to the ailerons aren't long enough, I had to recess the back plate of the horn into the aileron in order to get the bolts to do up.

Also, the thickness of the control horn means the clevises won't stay clipped shut with out a silicon retainer made from some fuel tube, as none supplied.

And finally the wings have a metal retained captive bolt inside, to bind the wings to the fuselage, instructions mention 2 x 5mm plastic bolts, but these don't appear to be supplied either.

None of these are insurmountable problems, but they detract from what would other wise be a well fitted out plane.

  1. 1
  2. 2
Customer files
No File Name Download [999]
a picca Download [1358]
another picca Download [1353]
manual Download [999]
No File Name Download [999]
No File Name Download [999]
No File Name Download [43]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save