Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

HobbyKing Sistema de Refrigeração Líquida Para RC carros com auto bomba de circulação e o radiador

Generating Links

HobbyKing Sistema de Refrigeração Líquida Para RC carros com auto bomba de circulação e o radiador

Preço:

Now save economize 0,00 € 0,00 €

55,94 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
074000236-0
Envio Grátis? Clique aqui aprender mais!

Apresentando o líquido auto-circulando sistema de termostato arrefecida HobbyKing de 36mm com motor rc carros.

O sistema de arrefecimento líquido consiste em um radiador com bomba de circulação integrada, tubos de refrigerante, e um líquido arrefecido a placa de montagem do motor. Basta trocar montar o motor, ligar o radiador e executar 2 linhas de refrigeração. A bomba vem com um adaptador em Y para entrar entre o receptor e o cabo de alimentação BEC, desenho única 12mA do poder a circular.

Isso é ótimo para a aparência de escala e onde o fluxo de ar pode ser um problema, e é perfeito para aqueles que apenas querem adicionar o seguro extra sobre seu investimento.

especificações:
Mount dimensões: 47x35x6mm Para 36 mm de-runner motores (exceto bibcock de)
Dimensões do radiador / bomba: 45x60x15mm
Peso total: <45g
Fonte de alimentação: 3,7 ~ 5V
Consumo de corrente: 12mA

  • HobbyKing Liquid Cooling System
Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

RocketRobin | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2016

I've installed two of these pump and "coil" (not radiator) units in an LC system to cool the gear driven in-runner Neumotor in my Great Planes P6E Hawk.
Since the install is in a airplane that can be flow at negative Gs, I used two in tandem, so if one of the inertia pumps ingests an air bubble the other will push it through to the reservoir/ air trap I have installed.
The cooling performs with great alacrity. With the pumps on, maximum motor temperature is ambient 15F. With the pumps turned off, the motor temperature increases at a continuous rate about 30F/minute.
There are some concerns with reliability. The pump wires gauge is very conservative, so I soldered on regular servo extension wires and secured them to the motor bodies with HST. Also, since the pumps are driven by coreless motors, the MTBF is somewhat limited. Whilst these motors can be easily replaced with other off the shelf units, brushless motor powered pumps are far more desirable. After all, changing a motor pump involves draining and recharging the cooling system.

Cheers!
Rocket

RICKTOR | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 27, 2015

This great little unit. It doesn't exactly what it says it does. I cannot believe the amount of water volume that this little tiny pump circulates. However, it is unrepairable if a lead should come off the motor. At $37 US you'd expect to be able to repair this pump. My unit was damaged right out of the box unfortunately, I didn't notice it until I had installed it in my boat. The leads that go to the motor are so tiny that any amount of movement or vibration will cause it to break. The motor has no soldering tabs on it so the leads go into the motor. Once they break the unit is useless. There is no way of repairing it. They need to redesign it with soldering tabs on the motor so different leads can be used. This is my only negative thing about this product.

Franco M | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 28, 2014

Unfortunately, after a bit of time working enters the water into the engine causing property damage and no longer works, the fan and the motor should be magnetically coupled, the radiator should be fitted with holes to attach a fan, the object is not yet perfected look patiently for this to happen. Thank you

__Rudi | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2014

System arrived with one broken wire on the water pump motor (impossible to solder). To avoid sending back the system (if you ever tried this you know why I didn't do it ;=)) I bought a fitting replacement motor in my local hobby shop. After that issue was solved I tried to insert water in the system. Till today I was not able to remove all air blister in the system. I am very happy for every hint.

Rudi

Arquivos de clientes
front mounting Download [2386]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!