New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Placa de distribuição Hobbyking Multi-potência rotor (DIY 8 x PCB saída)

Placa de distribuição Hobbyking Multi-potência rotor (DIY 8 x PCB saída)

Shipped From:
  • USA
  • International (Hong Kong)
QTY:

Now save guardar 0,93 € 0,93 €

Special Price 1,13 € 1,13 €

You save guardar 0,93 € 0,93 €

Was  2,06 €

Already Purchased
Estado:
Disponível
SKU:
9171000180
WANT FREE SHIPPING? Click here to find out more!

Projetado em casa pela HobbyKing Enginerds, esta placa de distribuição de energia útil tem a mesma impressão do pé como os nossos painéis de controle Multi-rotor e é a solução definitiva para a fiação de distribuição de energia arrumado. Basta soldar você poder leva diretamente para os pontos de contacto sobre esta placa. Os pontos de contacto PCB são banhados a ouro para a máxima eficiência.

Características:
Atuais: 8 saídas x 20A (MAX)
Potência de entrada: 8 pontos de contacto x
Potência: 8 pontos de contacto x
Dimensões: 50x50x2mm
Peso: 7,6 g (apenas PCB)

  • SKU 9171000180
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 19.0000
  • Comprimento 55.00
  • Packaging Width 5.00
  • Altura 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

simple board for a decent price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

simple board for a decent price

I used this item in a few quadrocopters - very useful and good value for money. I also used one for octocopter project and works well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I used this item in a few quadrocopters - very useful and good value for money. I also used one for octocopter project and works well.

Perfect for a 250 class frame or biger. It sticks out if you put it in your quad (250) but I found out that it fitted perfectly on the bottom and is the best out of many that i have tried.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect for a 250 class frame or biger. It sticks out if you put it in your quad (250) but I found out that it fitted perfectly on the bottom and is the best out of many that i have tried.

No complaints about this little board, the same size as a kk board. Using it on a mini quad to power my esc's, fpv and lighting.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No complaints about this little board, the same size as a kk board. Using it on a mini quad to power my esc's, fpv and lighting.

Useful Easy to solder

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Useful Easy to solder

Ma commande n'est toujours pas arrive !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ma commande n'est toujours pas arrive !!

Easy to solder on esc wires and has an opening to allow wires through the middle so you can stack a flight board ontop of it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to solder on esc wires and has an opening to allow wires through the middle so you can stack a flight board ontop of it.

Nicely made and finished power distribution board with many input and output pads which provide easy soldering (just put the soldering iron on 400plus degrees). Because of this it will be really hard to notice that you soldered wires by hand.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nicely made and finished power distribution board with many input and output pads which provide easy soldering (just put the soldering iron on 400plus degrees). Because of this it will be really hard to notice that you soldered wires by hand.

Good quality, cheap and light. Can't ask for more. Have 12G from battery going to it after going through the telmetry and pixhawk power module, with 16G radiating out to my 6 motors. 2 18G provide power to the UBEC Storm32 Gimbal controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, cheap and light. Can't ask for more. Have 12G from battery going to it after going through the telmetry and pixhawk power module, with 16G radiating out to my 6 motors. 2 18G provide power to the UBEC Storm32 Gimbal controller.

Placa pcb para facilitar conexiones no solo para quadcopters. La uso en mi ground station.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Placa pcb para facilitar conexiones no solo para quadcopters. La uso en mi ground station.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
My Design by Wolfes1126 Download [62]
Design by wolfes1126 Download [62]
No File Name Download [832]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking