New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Hobbyking sem fio da bateria Rastreador w / Free 869.5Mhz Bateria

Hobbyking sem fio da bateria Rastreador w / Free 869.5Mhz Bateria

Discontinued Product

Please continue searching for a similar product.
Peso:
129 g
SKU:
HK-Traker8695
WANT FREE SHIPPING? Click here to find out more!
Desejo que você poderia saber a voltagem da bateria Lipoly enquanto você está voando?
Quer ser capaz de saber com precisão quando seu pacote está prestes a queda de tensão?

O Novo - & - Melhoria Hobbyking bateria sem fio rastreador monitora seu lipoly através do bujão de carga e envia de volta um sinal para o seu receptor. Se uma das suas células cair abaixo de 3.6V o LED para essa célula vai virar vermelho. Uma vez que a célula cai abaixo de 3v o LED pisca eo alarme sonoro emite um sinal sonoro, indicando que você pousar o mais rápido possível.
Esta unidade é também uma ótima maneira de encontrar essas baterias que a queda de tensão muito sob carga.
O transmissor opera em banda FM 869.5Mhz e pode monitorar 2S a 6S baterias.

Spec.
Transmissor Peso: 7g
Receptor Peso: 35g (esta é a parte que você tenha em seu bolso)
distância do sinal: Around 300-400mtr
Bateria: 7.4V / 2 celular (Incluído)
Uso;
Verifique se o receptor de mão está ligado e de ter seleccionado o número de células em primeiro lugar. Uma vez feito isso, em seguida, ligar o transmissor dentro do avião para o plug baterias equilíbrio. Se você não fazê-lo por esta ordem, a leitura será incorreta.
  • SKU HK-Traker8695
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso ( g ) 129.00
  • Comprimento 0.00
  • Largura 0.00
  • Altura 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!