New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HobbyKing X930 Glass Fiber Octocopter 895 milímetros Moldura

HobbyKing X930 Glass Fiber Octocopter 895 milímetros Moldura

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 8,31 € 8,31 €

Special Price 25,07 € 25,07 €

You save guardar 8,31 € 8,31 €

Was  33,38 €

Estado:
Disponível
SKU:
9171000117
WANT FREE SHIPPING? Click here to find out more!

O quadro octocopter HobbyKing X930 é um quadro de fibra de vidro de alta qualidade que oferece tanto uma grande procura e desempenho. Construído a partir de peso leve ainda fibra de vidro extremamente rígida e alumínio, o X930 oferece uma grande combinação de redução de peso e força.

Este quadro foi derivado de nossos já populares da série "X" quadros de multi-rotor, com construção semelhante e estilo, mas agora em uma configuração octo. Este é um exclusivo HobbyKing que significa que você não vai encontrar em nenhum outro lugar!

A capacidade de elevação adicional de uma configuração octo torna este quadro ideal para transportar cargas maiores, como sistemas de câmeras e outros componentes eletrônicos. Isto faz para um equipamento de câmera excepcional ou simplesmente um quadro multi-rotor muito ágil e poderosa para acrobacias!

O X930 apresenta um quadro de 2 milímetros muito bem acabado de fibra de vidro grosso principal, braços de alumínio quadrada de 1 mm de espessura, pesados ​​estendidos patins de aterragem de altura e vidro rígida motor monta fibra. Este quadro octocopter é construído resistente e pronto para transportar uma carga útil sério!

Nós oferecemos uma linha completa de produtos eletrônicos multi-rotor tais como a placa multi-rotor controle, ESC, motores e mais, e isso nunca foi mais fácil ou mais acessível para obter uma aeronave multi-rotor no ar!

Todo o hardware necessário está incluído.

especificações:
Largura: 895 milímetros
Buracos Motor Parafuso: 16/19 / 25mm
Quadro Peso: 916g (w / out do sistema eletrônico)

Requeridos:
placa de controle Multi-Rotor
15 ~ 25A Brushless ESC x 8
28-XX / 35-XX sem escova do motor x 8
10 ~ 12 polegadas hélice - 4 padrão de rotação / 4 reverso
2650 ~ 3600mAh 3 ~ 4S lipoly
Seu próprio 4CH transmissor / receptor

  • SKU 9171000117
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 1326.0000
  • Comprimento 435.00
  • Packaging Width 75.00
  • Altura 210.00
  • HK X930 Octocopter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

excellent frame let down by the lack of a second deck but that said its very simple to achieve with the use of a few stand-offs and for example a glassfibre battery carrier wich is what i used but for the pricwe EXCELLENT VALUE FOR MONEY WELL THOUGHT OUT VERY LIGHT FOR ITS SIZE BUT IT REALLY IS A TRUE BUILDERS KIT AND WHILST A BEGINER COULD ASSEMLE IT TOO MUCH IS LEFT TO THE BUILDER TO WORK OUT FOR EXAMPLE MOTOR AND PROP SET UP AND THE SECOND DECK ALL IN ALL EXCELLENT IVE SEEN THEM FLOWN WITH ANYTHING FROM A 2212 MOTOR UPTO A E600 FROM DJI

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent frame let down by the lack of a second deck but that said its very simple to achieve with the use of a few stand-offs and for example a glassfibre battery carrier wich is what i used but for the pricwe EXCELLENT VALUE FOR MONEY WELL THOUGHT OUT VERY LIGHT FOR ITS SIZE BUT IT REALLY IS A TRUE BUILDERS KIT AND WHILST A BEGINER COULD ASSEMLE IT TOO MUCH IS LEFT TO THE BUILDER TO WORK OUT FOR EXAMPLE MOTOR AND PROP SET UP AND THE SECOND DECK ALL IN ALL EXCELLENT IVE SEEN THEM FLOWN WITH ANYTHING FROM A 2212 MOTOR UPTO A E600 FROM DJI

Ok where to start.....
Assembly - Instruction lol there are none unless you call a picture of the parts instruction.
It is pretty much straight forward however.
The fit is horrible! plan on using some epoxy and some extra fasteners on some area's.
I read on the International site that the motor mounts are the worst part.
I will use the stock ones but have found aluminum ones on EBay for like $35 for a set of 8
The directions show the mounts on top of the arms but the video and photos here have them mounted below..... I guess its preference but I may mount my mounts on the bottom.
I'm waiting on motors I plan on using Emax XA2212 820KV w/ 10or 11'' props.... I am going to try 2 EMAX 4in1 ESC's but may switch to individual ones if the don't work well.
I'll let you know how it flys when its all together... Oh and I have a NAZA Lite Flashed w/ V2 for a Flight Controller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok where to start.....
Assembly - Instruction lol there are none unless you call a picture of the parts instruction.
It is pretty much straight forward however.
The fit is horrible! plan on using some epoxy and some extra fasteners on some area's.
I read on the International site that the motor mounts are the worst part.
I will use the stock ones but have found aluminum ones on EBay for like $35 for a set of 8
The directions show the mounts on top of the arms but the video and photos here have them mounted below..... I guess its preference but I may mount my mounts on the bottom.
I'm waiting on motors I plan on using Emax XA2212 820KV w/ 10or 11'' props.... I am going to try 2 EMAX 4in1 ESC's but may switch to individual ones if the don't work well.
I'll let you know how it flys when its all together... Oh and I have a NAZA Lite Flashed w/ V2 for a Flight Controller

WOW Riesig

Verarbeitung naja - ein bisschen hier und da nachschleifen musste schon sein

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WOW Riesig

Verarbeitung naja - ein bisschen hier und da nachschleifen musste schon sein

It's a cool frame, I'm pretty sure the only octocopter frame on hobbyking. The only problem I have with it is that the legs don't actually fit into the frame. I had to sand them down and they still barely fit in. Then on the bottom of the frame the little skid things are so lose they fall off every other time I pick the thing up. It wasn't a hard fix, some hot glue did the job as the only hard force they will be experiencing is when they get pushed INTO the frame, not out, when I land but it was rather annoying to have to sand and hot glue the thing together. Don't let this turn you off it, it's a great frame and I would buy it again, it's only just shy of brilliant!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's a cool frame, I'm pretty sure the only octocopter frame on hobbyking. The only problem I have with it is that the legs don't actually fit into the frame. I had to sand them down and they still barely fit in. Then on the bottom of the frame the little skid things are so lose they fall off every other time I pick the thing up. It wasn't a hard fix, some hot glue did the job as the only hard force they will be experiencing is when they get pushed INTO the frame, not out, when I land but it was rather annoying to have to sand and hot glue the thing together. Don't let this turn you off it, it's a great frame and I would buy it again, it's only just shy of brilliant!

Incredible frame for the price! I have about 10 flights now and here is what I have seen: motor mounts need reinforcing....I built my own by tracing the original mounts on aluminum plating and cut out...soo much better. The originals began vibrating and flexing. I could see cracks forming so better safe then sorry! While assembling the frame I wish I had used glue as well because skids and legs are beginning to loosen. The skids IMO need to be wider and longer....if the ground isn't perfectly level the copter can easily tilt over onto the props. I'm planning some more mods in the near future. Overall, great for what you are paying....just watch out on those motor mounts!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incredible frame for the price! I have about 10 flights now and here is what I have seen: motor mounts need reinforcing....I built my own by tracing the original mounts on aluminum plating and cut out...soo much better. The originals began vibrating and flexing. I could see cracks forming so better safe then sorry! While assembling the frame I wish I had used glue as well because skids and legs are beginning to loosen. The skids IMO need to be wider and longer....if the ground isn't perfectly level the copter can easily tilt over onto the props. I'm planning some more mods in the near future. Overall, great for what you are paying....just watch out on those motor mounts!!

This is an outstanding kit frame for the price. It's also HUGE! I'm pretty sure this won't fit in the trunk of my Audi without some dis-assembly (it's a small opening). It's slightly under 35 1/4 inches from motor center to motor center, or exactly 895mm. It's a bit difficult to assemble if you're mounting any extra carry gear (such as a camera/gimbal mount), only because 4 of the screws will require some finessing to get into place and tighten. This is something that should be addressed in a redesign. 5mm would make all the difference here. The landing gear seems a bit fragile, as do *all* low priced landing gear. I'd say there is enough clearance for a full sized DSLR, but my Nex 5t or n will fit without any issues. It might be time to get a van...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an outstanding kit frame for the price. It's also HUGE! I'm pretty sure this won't fit in the trunk of my Audi without some dis-assembly (it's a small opening). It's slightly under 35 1/4 inches from motor center to motor center, or exactly 895mm. It's a bit difficult to assemble if you're mounting any extra carry gear (such as a camera/gimbal mount), only because 4 of the screws will require some finessing to get into place and tighten. This is something that should be addressed in a redesign. 5mm would make all the difference here. The landing gear seems a bit fragile, as do *all* low priced landing gear. I'd say there is enough clearance for a full sized DSLR, but my Nex 5t or n will fit without any issues. It might be time to get a van...

Ce cadre Octocoptre est un bon choix si vous voulez vous lancer dans la fabrication de votre octocoptre.
-
Lger avec sa composition en aluminium et fibre de plastique, il vous apportera un poids totale au dcollage acceptable pour un engin de ce genre.
Nanmoins, les pices plastique ne sont pas conu pour resister aux chocs.
Malgrs ca, cela reste un trs bon produit

This framework Octocoptre is a good choice if you want to start making your octocoptre.

Lightweight with its aluminum composition and fiber plastic, it will give you a total takeoff weight acceptable for a device of this kind.
However, the plastic parts are not designed to withstand the shock.
Malgrs ca, it remains a very good product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ce cadre Octocoptre est un bon choix si vous voulez vous lancer dans la fabrication de votre octocoptre.
-
Lger avec sa composition en aluminium et fibre de plastique, il vous apportera un poids totale au dcollage acceptable pour un engin de ce genre.
Nanmoins, les pices plastique ne sont pas conu pour resister aux chocs.
Malgrs ca, cela reste un trs bon produit

This framework Octocoptre is a good choice if you want to start making your octocoptre.

Lightweight with its aluminum composition and fiber plastic, it will give you a total takeoff weight acceptable for a device of this kind.
However, the plastic parts are not designed to withstand the shock.
Malgrs ca, it remains a very good product

Ich habe diesen Rahmen vor ein paar Tagen herhalten und in sofort innerhalb 1h zusammengebaut. Die bebilderte Anleitung ist mit etwas Fantasie sehr gut zu interpretieren. Die Akkuhalterungen im Landegestell sind eine gute Idee, vielleicht sollte aber darber nachgedacht werden eine Befestigungsmglichkeit nher am Schwerpunkt anzubieten. Leider haben die einzelnen GFK-Teile nicht zu 100pcnt ineinander gepasst, so war an einigen stellen nachschleifen ntig. Wenn alles zusammengesteckt ist sollten die Teile auf jeden fall miteinander verklebt werden, da das Landegestell sonst doch etwas instabil ist.
Das grte Manko sind die Motorhalterungen am Ende der Ausleger! Sie sind so labil, dass durch die vom Motor verursachte Vibration den ganzen Copter in schwingung versetzt - hier herrscht akute Absturzgefahr!!! Habe die Halterungen weggelassen und die Motoren direkt auf den Aluminiumausleger montiert und sieh da: keine Schwingungen - keine Gefahr.

Alles in allem finde ich trotzdem das das Preis-Leistungs-Verhltnis stimmt!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe diesen Rahmen vor ein paar Tagen herhalten und in sofort innerhalb 1h zusammengebaut. Die bebilderte Anleitung ist mit etwas Fantasie sehr gut zu interpretieren. Die Akkuhalterungen im Landegestell sind eine gute Idee, vielleicht sollte aber darber nachgedacht werden eine Befestigungsmglichkeit nher am Schwerpunkt anzubieten. Leider haben die einzelnen GFK-Teile nicht zu 100pcnt ineinander gepasst, so war an einigen stellen nachschleifen ntig. Wenn alles zusammengesteckt ist sollten die Teile auf jeden fall miteinander verklebt werden, da das Landegestell sonst doch etwas instabil ist.
Das grte Manko sind die Motorhalterungen am Ende der Ausleger! Sie sind so labil, dass durch die vom Motor verursachte Vibration den ganzen Copter in schwingung versetzt - hier herrscht akute Absturzgefahr!!! Habe die Halterungen weggelassen und die Motoren direkt auf den Aluminiumausleger montiert und sieh da: keine Schwingungen - keine Gefahr.

Alles in allem finde ich trotzdem das das Preis-Leistungs-Verhltnis stimmt!

Nice frame, cool for octo. but without retract arm, so its quite difficult to store.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice frame, cool for octo. but without retract arm, so its quite difficult to store.

I recieved my X930 rather fast and building it was a breeze! (Thanks to my wifes emory boards haha!) I had to sand a couple slots but nothing i couldnt handle. Can't wait to order my motors!



One thing i noticed tho... In the main product picture, the motor mounts are installed UNDER the boom arm BUT the instructional exploded view shows them installed above the boom.



My instinct tells me that under the boom would be stronger than above. Am i right? Probably! Really excited to start filming my X930!!! (yes i typed that correct - i will film the copter flying as well as film WITH IT!) :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recieved my X930 rather fast and building it was a breeze! (Thanks to my wifes emory boards haha!) I had to sand a couple slots but nothing i couldnt handle. Can't wait to order my motors!



One thing i noticed tho... In the main product picture, the motor mounts are installed UNDER the boom arm BUT the instructional exploded view shows them installed above the boom.



My instinct tells me that under the boom would be stronger than above. Am i right? Probably! Really excited to start filming my X930!!! (yes i typed that correct - i will film the copter flying as well as film WITH IT!) :)

  1. 1
  2. 2
Customer files
Turnigy H.A.L. Gimbal mounted Download [1801]
Turnigy H.A.L Gimbal mounted 2 Download [2893]
Octocopter + KK2.1 Download [1896]
2 x 3s 2200 25c Lipo's Download [1823]
QBrain ESC x 2 Download [1454]
Octocopter motor with 8x45 prop Download [1481]
Sandwich box cover Download [1671]
Basic Rig Download [1326]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking