New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Hobbyking YEP 45A (2-6S) SBEC Brushless Speed ​​Controller V2

Hobbyking YEP 45A (2-6S) SBEC Brushless Speed ​​Controller V2

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000291-0
WANT FREE SHIPPING? Click here to find out more!

Nós estamos agora orgulhosos de oferecer nossa série Hobbyking YEP ESC. Com helicóptero específica opções de programação, tais como super suave arranque suave, o modo de RPM fixa (modo de governador) e ultra alta resolução, você não vai encontrar um melhor ESC helicóptero no mercado hoje!

Nós testamos estas unidades em nossos próprios helicópteros e encontrou-os para estar entre os melhores que já vi. O arranque suave super suave, juntamente com a sua resposta do acelerador alta resolução de ultra coloca esta ESC em uma classe de seu próprio!

Hobbyking YEP CES são construídos com componentes da mais alta qualidade para garantir fiel à classificação manipulação atual e operação de alta eficiência.

Todos os CES Hobbyking YEP pode ser programado através de cartão de programação opcional ou por entradas vara do transmissor.

Características:
• 6A poderosa 5.5V / comutação BEC
• cartão de programação opcional para a instalação conveniente
• ESC tem a vantagem de programação separado built-in por isso não há necessidade de desligar a partir de RX
• resolução do acelerador Super fina fornece primeira linha e linearidade de alta precisão
• ajustável modo Super arranque suave
• Modo RPM Constant (modo de governador)
• freio F3A ajustável.
freio EMF normais • 3 passos ajustável
• Alta capacidade de anti-interferência
• proteção de corte de baixa tensão com ajuste automático de NiCd / NiMH / Li-Ion / LiPo / LiFePO4
• opção de corte suave em baixa tensão, diminui RPM do motor gradual, em vez de corte rígido (LVC)
• baixa tensão de corte pode ser desativado
• Variável tensão de corte / célula
• circuito de roda livre-Active permite a capacidade ilimitada "carga parcial"
• LED de estado
• sincronismo do motor ajustável de 0 ° a 30 °
• proteção rotação Bloqueado (detecta um motor preso e pára a rotação do motor)
• Motor de inversão da ESC (não há necessidade de alterar fios / motor ESC)
• alarme de Proteção de temperatura e sobrecarga
• circuito Anti faíscas: reduz faíscas de conexão (para HV ESC)
• proteção contra perda de sinal do acelerador. Se o sinal é perdido por 3 segundos, o aparelho será automaticamente cut-off.
• power-on de segurança. (Motor não será iniciado até acelerador é devolvido à posição mais baixa)

*** Este ESC é compatível com os modelos de helicópteros e avião. ***

especificações:
Max Cont atual: 45A
Max Explosão atual: 55A por 10 segundos
Bateria de 2-6 células li-XX ou 6-16 Ni-MH / Ni-Cd: Tensão de entrada
BEC: 5.5 / 6A comutação BEC
PWM: 8 ~ 16 KHz
Max RPM: 240,000rpm para 2 poloneses Brushless
PCB Tamanho: 50x34mm
Peso: 50 g (incluindo fios)

  • SKU 9171000291-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 67.0000
  • Comprimento 110.00
  • Packaging Width 25.00
  • Altura 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

For the money, these are about the best ESC's available. Beautiful super slow startup for helis, and thereafter very quick to react to throttle inputs. Superb! Running on a 450 with 6S setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the money, these are about the best ESC's available. Beautiful super slow startup for helis, and thereafter very quick to react to throttle inputs. Superb! Running on a 450 with 6S setup.

very nice ESC with the programing wire separate from the signal one. easy to program with the card and seems like a very good quality ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice ESC with the programing wire separate from the signal one. easy to program with the card and seems like a very good quality ESC.

Der Regler ist einfach genial. Der Governor Mode regegelt absolut stabil , auch bei 60pcnt Reglerffnung. und wird nicht warm. Ich fliege den regler in einem Mini Titan E325S seit 80 Flgen ohen die geringsten Probleme . Das BEC ist mehr als ausreichend und stabil. Unbedingt die Programmkarte dazukaufen. !!sonst ist dei Programmierung ein Quler

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der Regler ist einfach genial. Der Governor Mode regegelt absolut stabil , auch bei 60pcnt Reglerffnung. und wird nicht warm. Ich fliege den regler in einem Mini Titan E325S seit 80 Flgen ohen die geringsten Probleme . Das BEC ist mehr als ausreichend und stabil. Unbedingt die Programmkarte dazukaufen. !!sonst ist dei Programmierung ein Quler

YEP's ESC's are OK, but NOT this model (V2) I have only YEP's, but this one has a lot of ripple on the 5 V rail ( 1.55 V peak to peak). The peak voltage is very close to 7 volts. I was able to hear the switching noise in the receiver. Not good at all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

YEP's ESC's are OK, but NOT this model (V2) I have only YEP's, but this one has a lot of ripple on the 5 V rail ( 1.55 V peak to peak). The peak voltage is very close to 7 volts. I was able to hear the switching noise in the receiver. Not good at all.

I connected mine to a tarot 1700kv motor. I tried every settings of timing but still, the motor bogs. I tried until the ESC burned for no reason.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I connected mine to a tarot 1700kv motor. I tried every settings of timing but still, the motor bogs. I tried until the ESC burned for no reason.

An up date.
ESC is been working fine, no more power fluctuations.
Don't know what to blame but what I did is to calibrate end points and gov store several times with the right timing and PWM frequency for my set up. Fb with 450mx 3400.
Not sure if this had something to do with the servos twitching, don't think so.
But ESC is doing what it suppose to do, happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An up date.
ESC is been working fine, no more power fluctuations.
Don't know what to blame but what I did is to calibrate end points and gov store several times with the right timing and PWM frequency for my set up. Fb with 450mx 3400.
Not sure if this had something to do with the servos twitching, don't think so.
But ESC is doing what it suppose to do, happy with it.

I also have problems
When connecting to my receiver you could hear a small beep from the receiver again.
my voltmeter gave 6 volts.
when I got my motor connected and slowly brought up to speed this was stuttering runs.
Also the servo's stuttering start running back and forth.
After full throttle there was smoke coming from the esc.
Direct the batt disconnected no idea if it is faulty, but I'm done.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I also have problems
When connecting to my receiver you could hear a small beep from the receiver again.
my voltmeter gave 6 volts.
when I got my motor connected and slowly brought up to speed this was stuttering runs.
Also the servo's stuttering start running back and forth.
After full throttle there was smoke coming from the esc.
Direct the batt disconnected no idea if it is faulty, but I'm done.

I installed the yep 45a esc v2 on a trec 450l dominator 6s with kst215mg on cyclic and kst515mg on the tail. Using a Futaba CGY750 flybarless unit with S-Bus receiver. The yep 45a v2 works great. Love the governor store function.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I installed the yep 45a esc v2 on a trec 450l dominator 6s with kst215mg on cyclic and kst515mg on the tail. Using a Futaba CGY750 flybarless unit with S-Bus receiver. The yep 45a v2 works great. Love the governor store function.

Received my yep 45a esc v2 with the program card today and installed it on my trex 450l dominator. I got 5 flights on it and it works great. I have kst215mg servos on cyclic and align ds525mg on the tail. Governor store also works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my yep 45a esc v2 with the program card today and installed it on my trex 450l dominator. I got 5 flights on it and it works great. I have kst215mg servos on cyclic and align ds525mg on the tail. Governor store also works great.

same problem, BEC output is 5.85V with peaks over 6.8V, all servos twitch and movement isnt smooth. Same servos with Plush 30A work perfect. So I can not recommend to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

same problem, BEC output is 5.85V with peaks over 6.8V, all servos twitch and movement isnt smooth. Same servos with Plush 30A work perfect. So I can not recommend to buy.

  1. 1
  2. 2
Customer files
No File Name Download [102]
YEP TX Programming Download [102]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save