New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HobbyKing® ™ 3D 1.295 milímetros Slick Balsa ARF

HobbyKing® ™ 3D 1.295 milímetros Slick Balsa ARF

Discontinued Product

Please continue searching for a similar product.
SKU:
9110000010
WANT FREE SHIPPING? Click here to find out more!

Nossa Slick 3D é um dos aviões de acrobacia olhar mais quente ao redor, mas como todos os modelos desta classe, parece por si só não são suficientes, por isso é uma coisa boa que o Slick HobbyKing® ™ 3D foi projetado com uma coisa em mente, acrobacias 3D Extreme !

A qualidade do nosso Slick 3D é simplesmente ótimo! A fuselagem foi construída para manter o peso de vôo mínima, mas forte o suficiente para tomar a punição de acrobacias extremas, a cobertura excelente qualidade foi habilmente aplicado e para o toque final, as calças capuz, copa e rodas são terminados em um brilho vermelho brilhante pintura. O hardware é excelente, escolhido para manter o peso a voar a um mínimo absoluto e, claro, o modelo engloba características como uma caixa de motor pesado pré-montado com firewall pré-perfurados, heavy-duty asa de carbono longarina, anexo ala polegar-parafuso, fibra de carbono sob a carruagem com os eixos das rodas de alumínio, trancando dossel, cabos de puxar-pull para os chifres do leme e carbono de controlo de fibras - a HobbyKing® ™ 3D ARF Slick vai chegar no ar rapidamente e facilmente.

Nossa Slick 3D executa cada polegada tão bom quanto parece, naturaly faz para um grande avião esporte, mas seria justo dizer que incondicional 3D é o que o Slick 3D foi projetado para. A precisão da estrutura do avião, parece impressionante, qualidade superior e incríveis características peso leve tornar o 3D Slick um deve ter plano para todos os pilotos de acrobacia e 3D!

Características:
• construção de qualidade superior e cobrindo
• Fácil e rápido para construir
• Ultra leve, mas fuselagem forte
• carenagem de fibra de vidro
• Superbly aplicado, revestimento de alta qualidade
• elevador Airfoiled eo leme
• Excelente esquema de cores para fácil orientação
• capacidade 3D impressionante
• A fibra de carbono sob o carro do
• chifres de controle de fibra de carbono
• montagem no campo Rápido, fácil de transportar

especificações:
Envergadura: 1295 milímetros
Comprimento: 1.295 milímetros
Peso do vôo: 1560 ~ 1780g


exige:
Seu próprio 4 ~ 6 Canal TX / RX
38 milímetros Brushless Outrunner Motor
40A ~ 60A ESC
4 x Digital High Torque servo 12g
Bateria 2200mAh ~ 2650mAh 4s Lipoly
50 milímetros Spinner
hélice 13x8-14x7

  • SKU 9110000010
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 4200.0000
  • Comprimento 1145.00
  • Packaging Width 215.00
  • Altura 380.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The hols .for the sevos. Hb recommend .are to big for the servos .The manual.is from similar. Model.from 3d hobbies. The quality. Is ok for the price. Should. Be better. If the copy. As carbon fibre tubes.all the plane as the 3d hobby models. Well..for the price. Should be better...The model is done. Next test.will be fly..I will post a video. .soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The hols .for the sevos. Hb recommend .are to big for the servos .The manual.is from similar. Model.from 3d hobbies. The quality. Is ok for the price. Should. Be better. If the copy. As carbon fibre tubes.all the plane as the 3d hobby models. Well..for the price. Should be better...The model is done. Next test.will be fly..I will post a video. .soon

My Slick set-up:

Motor : SK3 3548 700kv

Prop: APC 14X7 .I'll test APC 13 X 6,5 soon

Bettery: Nano-Tech 3000 4S 50C

Servo: 4x TGY-306G - HV Metal digital

ESC : HK 60A

SBec: castle Bec

Suggested surface travel excursions and sealed surfaces hinges gap .

I added some CF reinforcements on motor tray area.

CG: 10,5 cm at the wing near fuselage from trailing edge

Finally flying weight 1985 Gr.

Video posted in discussion.



PAI ATTENTION HK DO NOT GET SPARE PARTS,

So take it in count before to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Slick set-up:

Motor : SK3 3548 700kv

Prop: APC 14X7 .I'll test APC 13 X 6,5 soon

Bettery: Nano-Tech 3000 4S 50C

Servo: 4x TGY-306G - HV Metal digital

ESC : HK 60A

SBec: castle Bec

Suggested surface travel excursions and sealed surfaces hinges gap .

I added some CF reinforcements on motor tray area.

CG: 10,5 cm at the wing near fuselage from trailing edge

Finally flying weight 1985 Gr.

Video posted in discussion.



PAI ATTENTION HK DO NOT GET SPARE PARTS,

So take it in count before to buy.

Manual was not for the 3D slick HK model. Small changes, but general missing too many points.

YOu have to be creative yourself to get this baby to fly.

I installed rudder, and the "balsa" was not laser cut correctly, so one rudder side is a few degrees lower than other side :(

All in all, not worth saving money on the model, perhaps the plush ESC etc, but last time I order a plane for HK for sure.

130 dollars out the window more or less

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Manual was not for the 3D slick HK model. Small changes, but general missing too many points.

YOu have to be creative yourself to get this baby to fly.

I installed rudder, and the "balsa" was not laser cut correctly, so one rudder side is a few degrees lower than other side :(

All in all, not worth saving money on the model, perhaps the plush ESC etc, but last time I order a plane for HK for sure.

130 dollars out the window more or less

I am assembling the 3D Slick right now. Upon arrival the box was severely dented and there were 2 big holes in it. I was afraid the plane would be ruined. When I opened the box the plane was completely intact thanks to the double boxing of HK and the filling with air bags.

The quality is perfect. Be aware that it is a very light wooden structure so crashes won't be forgiven.

I have an issue though with the by HK recommended HK-922MG servo's. They are too small and fall through the servo holes. Luckily, I had some spare Hitec HS-80MG servo's that fit just fine.

Another issue is the predrilled holes for the motor. They are not centered on the motor plate but way out of center to the right when you look at the plate. Is it supposed to be like this and in case it is, what is the reason for that ?

I hope to receive an answer for this issue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am assembling the 3D Slick right now. Upon arrival the box was severely dented and there were 2 big holes in it. I was afraid the plane would be ruined. When I opened the box the plane was completely intact thanks to the double boxing of HK and the filling with air bags.

The quality is perfect. Be aware that it is a very light wooden structure so crashes won't be forgiven.

I have an issue though with the by HK recommended HK-922MG servo's. They are too small and fall through the servo holes. Luckily, I had some spare Hitec HS-80MG servo's that fit just fine.

Another issue is the predrilled holes for the motor. They are not centered on the motor plate but way out of center to the right when you look at the plate. Is it supposed to be like this and in case it is, what is the reason for that ?

I hope to receive an answer for this issue.

Customer files
Slick 3D motor plate Download [164]
Manual 3D Slick Download [1231]
3D Slick Manual Download [1231]
3D Slick motor mount Download [164]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking