New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HobbyKing® ™ Condor EP Balsa Glider 1,240 milímetro (ARF)

HobbyKing® ™ Condor EP Balsa Glider 1,240 milímetro (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9110000005
WANT FREE SHIPPING? Click here to find out more!

Procurando por um pequeno, clássico estilo planador balsa para livre de estresse domingo vôo? O Condor EP cabe a conta.

O planador HobbyKing® ™ Condor EP é um kit balsa planador 4CH bem acabado e principalmente pré-montada. Apresentando uma fuselagem pré-construído, fácil de instalar cauda pré-fenda e parafuso de duas peças na asa, muito pouco resta para completar este modelo e buscá-la para o ar! tubos pré-instalados guia pushrod tornar a instalação do servos e criação de superfícies de controle de uma brisa. Com o seu design de asa reta este modelo oferece capacidade de um pouco mais acrobático do que um planador de asa diedro standard, mas ainda fornece características de vôo estáveis. O Condor terá a certeza de lhe proporcionar horas de diversão térmica crescentes!

Este modelo vem em quase pronto para voar forma, o que significa que você precisará adicionar seu próprio ESC, servos, sistema de motor brushless / rádio e bateria. Por favor, veja os itens relacionados abaixo.

Características:
• Tamanho compacto
• fuselagem pré-construídos
• Duas peças bolt-on projeto da asa
• Fácil de instalar cauda pré-entalhada
• tubos de guia pushrod pré-instalados
• projeto de asa reta permitindo acrobacias planador

especificações:
Envergadura: 1240 milímetros
Área da asa: 21.7sq.dm
comprimento 835 milímetros
Voar Peso: 670g

Requeridos:
4 x 5 ~ 9g Servos
22 ~ 28 milímetros Brushless
15 ~ 25A Brushless ESC
3S 1000 ~ 1800mAh Lipoly
7x3.5 ~ Hélice 8x4
O seu próprio transmissor e receptor 4CH

  • SKU 9110000005
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 1509.0000
  • Comprimento 795.00
  • Packaging Width 210.00
  • Altura 255.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Overlander Tornado thumper 2826 /09 1900kv
Overlander 20A ESC
Alloy Spinner 3.2mm shaft
8 x 4.5 Propeller.
Turnigy 1800mah 3s 20c
New Power XL-9.0gram servos x 4.

Weight 1lbs 3 ozs

Static test produced 21.4 amp draw

In flight amp draw will be reduced so this proves to be a good balance.

G of G 50mm back from leading edge as stated. (on front edge of main spar)
Slight reinforcement to engine mount and brace on fuselage at front of wing.
Thin ply sheet used to reinforce wing bolt fixings too.
The cowl is a tricky fit so I did without it. (no big deal here).
Keep everything as far forward as possible.
I used an alloy spinner just for a little more weight up front.

Model performs wonderfully with predictable hand launch.
Nice vertical speed with very nice big loops. Gentle long landings.
Flight time is endless on the 1800mah batteries. Quite a nice glide too. The flat wing is an advantage.

All in all with this setup the model is a delight.

Build goes together in no time, the reinforcements are essential.
The whole thing fit a any car with the wings attached.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overlander Tornado thumper 2826 /09 1900kv
Overlander 20A ESC
Alloy Spinner 3.2mm shaft
8 x 4.5 Propeller.
Turnigy 1800mah 3s 20c
New Power XL-9.0gram servos x 4.

Weight 1lbs 3 ozs

Static test produced 21.4 amp draw

In flight amp draw will be reduced so this proves to be a good balance.

G of G 50mm back from leading edge as stated. (on front edge of main spar)
Slight reinforcement to engine mount and brace on fuselage at front of wing.
Thin ply sheet used to reinforce wing bolt fixings too.
The cowl is a tricky fit so I did without it. (no big deal here).
Keep everything as far forward as possible.
I used an alloy spinner just for a little more weight up front.

Model performs wonderfully with predictable hand launch.
Nice vertical speed with very nice big loops. Gentle long landings.
Flight time is endless on the 1800mah batteries. Quite a nice glide too. The flat wing is an advantage.

All in all with this setup the model is a delight.

Build goes together in no time, the reinforcements are essential.
The whole thing fit a any car with the wings attached.

Tried to write review but didn't post? Trying again. Turnigy Aerodrive 2209/26 1130kv, 1000mah, 18A ESC, Pelikan aluminum "flow through" spinner with Aeronaut CAM 9x5 folding prop. 510 grams total weight. Keep everything as far forward as possible. As set up the plane is AMAZING! Flies like it's on rails. Disappointed with quality in the cowling and hatch area. I had to peel back the covering and extensively sand the fuselage so the cowling would fit. Cowling finish was terrible. I also replaced the plastic sheet hatch with fiberglass over balsa sheet. More work than I wanted but it was worth it. Great value. Posted "file" pictures.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tried to write review but didn't post? Trying again. Turnigy Aerodrive 2209/26 1130kv, 1000mah, 18A ESC, Pelikan aluminum "flow through" spinner with Aeronaut CAM 9x5 folding prop. 510 grams total weight. Keep everything as far forward as possible. As set up the plane is AMAZING! Flies like it's on rails. Disappointed with quality in the cowling and hatch area. I had to peel back the covering and extensively sand the fuselage so the cowling would fit. Cowling finish was terrible. I also replaced the plastic sheet hatch with fiberglass over balsa sheet. More work than I wanted but it was worth it. Great value. Posted "file" pictures.

Posted review earlier. Rating "crowns" were not selected. Please update to this reflect selection. Thank you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Posted review earlier. Rating "crowns" were not selected. Please update to this reflect selection. Thank you.

While it looked good in the box I soon found the fuse to be a little twisted. the bblind nuts for the wing bolts were the wrong size which meant I had to break the bracket off and make a new one with new dubro blind nuts and bolts. If you have no experience building balsa models don't buy it.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

While it looked good in the box I soon found the fuse to be a little twisted. the bblind nuts for the wing bolts were the wrong size which meant I had to break the bracket off and make a new one with new dubro blind nuts and bolts. If you have no experience building balsa models don't buy it.....

Plane will barely balance with a 2250 3s 65c nano. Very tail heavy. Flys decent slow roll rate with a lot of throw.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane will barely balance with a 2250 3s 65c nano. Very tail heavy. Flys decent slow roll rate with a lot of throw.

Feel a bit ripped as i just brought this plane as a platnium member only to find it advertised by hobbyking cheaper on ebay! dont buy this plane if you have no experience in balsa as instructions are poor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Feel a bit ripped as i just brought this plane as a platnium member only to find it advertised by hobbyking cheaper on ebay! dont buy this plane if you have no experience in balsa as instructions are poor

I love this plane!! I wouldn't recommend it with a 2205 if you're planning on flying a 1500 mAh battery though, it might be a bit too heavy (I can't say for sure though, I flew mine with a 2830 w/18A ESC and it flew GREAT). It can fly very smooth and the stall was very predictable, but even fully loaded and ready to fly it needed weight added to the nose to get the CG right. It came with a CD with the manual on it, which made putting it together easy. It rolls great and can handle inverted/aerobatics quite well!! It's one of those rare planes that will fly slow and aerobatics. The motor mount is a bit too weak to fly without the cowl (which wouldn't fit under the prop anyway) and I ended up breaking it on my second landing, otherwise it's a great plane and is GORGEOUS to look at!
<iframe width="560" height="315" src="http://www.youtube.com/embed/7BQZIG8n2KE" frameborder="0" allowfullscreen></iframe>

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this plane!! I wouldn't recommend it with a 2205 if you're planning on flying a 1500 mAh battery though, it might be a bit too heavy (I can't say for sure though, I flew mine with a 2830 w/18A ESC and it flew GREAT). It can fly very smooth and the stall was very predictable, but even fully loaded and ready to fly it needed weight added to the nose to get the CG right. It came with a CD with the manual on it, which made putting it together easy. It rolls great and can handle inverted/aerobatics quite well!! It's one of those rare planes that will fly slow and aerobatics. The motor mount is a bit too weak to fly without the cowl (which wouldn't fit under the prop anyway) and I ended up breaking it on my second landing, otherwise it's a great plane and is GORGEOUS to look at!
<iframe width="560" height="315" src="http://www.youtube.com/embed/7BQZIG8n2KE" frameborder="0" allowfullscreen></iframe>

Customer files
No File Name Download [154]
Mods/Fiberglass hatch/Beefup/wing mount Download [115]
Mods/Fiberglass hatch/Beefup/wing mount Download [163]
Mods/Fiberglass hatch/Beefup/wing mount Download [151]
Mods/Fiberglass hatch/Beefup/wing mount Download [166]
No File Name Download [154]
No File Name Download [166]
No File Name Download [115]
No File Name Download [218]
Condor Manual Download [4649]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking