New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HobbyKing® ™ Junkers JU-52 1200 mm (PNF)

HobbyKing® ™ Junkers JU-52 1200 mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Peso:
2160 g
SKU:
JU-52-PNP
WANT FREE SHIPPING? Click here to find out more!

O Junkers JU-52, ou "Iron Annie", como foi apelidado foi originalmente desenvolvido como um avião de passageiros e de transporte e serviu na Alemanha de 1932 até 1945, unsuprisingly, ele foi empurrado para o serviço militar e foi mesmo usada como um bombardeiro médio para um período curto. Então bem sucedido foi o JU-52 que licenciam construída a versão de ainda estavam sendo usados ​​como um veículo militar e civil até a década de 1980. O H-King JU-52 é um modelo da Lufthansa operou aeronaves regularmente visto em shows aéreos em toda a Europa e é pintado em 1936 esquema histórico Deutsche Lufthansa.

Este plug escala excelente e modelo Fly é simples de montar com o motor, ESC e todo servo de pré-montado. O único motor tem potência mais do que suficiente, os adereços fora-de tabuleiro são apenas para efeito e girar facilmente, a lavagem prop a partir do motor principal é o suficiente para colocá-los para cima, esta configuração foi escolhida para manter o modelo simples, leve e capaz de excelentes tempos de voo. O JU-52 é muito prático, ele apresenta uma asa removível 2 pc que é simples de conectar-se como não há uma teia de aranha de fios ESC para ligar, um tailwheel dirigível para a manipulação excelente terreno, pneus de borracha para durabilidade e mais importante, que é feito de espuma dura de EPO.

O acabamento em HobbyKing® ™ JU-52 é excelente, a pele efeito ondulado completa acrescentando-lhe a aparência escala. voo escala é o que este modelo olhando soberbo é sobre tudo e é aí que o Junkers se destaca, uma combinação de controle de 4 canais e carga alar luz significa que esse modelo pode ser feita lentamente, mas com autoridade, é outro modelo único e exclusivo de HobbyKing® ™ para o entusiasta escala que vai se destacar em qualquer campo de vôo!

especificações:
Envergadura: 1200 milímetros
Comprimento: 820 milímetros
Voar Peso: 700g
ESC: 20A w / BEC
Servo: 9g x 4
Motor: 900KV 3128 Brushless Outunner

exige:
Sua própria 4 Channel TX / RX
Bateria 1800mAh ~ 2200mAh 3s Lipoly

  • SKU JU-52-PNP
  • Brand -
  • Capacidade ( mAh) -
  • Peso ( g ) 2160.00
  • Comprimento 820.00
  • Largura 160.00
  • Altura 300.00
  • HobbyKing® ™ Junkers JU-52 1200mm
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This model arrives with motor in trouble.

I cant achieve specs because manual is old and has no information I need. I dont like of two props fixed and the motor alone doesn't work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This model arrives with motor in trouble.

I cant achieve specs because manual is old and has no information I need. I dont like of two props fixed and the motor alone doesn't work.

Really cool plane, goes well with my ME110. Have added motors in the wings easy job as all the wiring tunnels are moulded. Also added flaps so it flies really slow, and have repainted it in the 'Where eagles dare' winter camo. Lookout for the video coming soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really cool plane, goes well with my ME110. Have added motors in the wings easy job as all the wiring tunnels are moulded. Also added flaps so it flies really slow, and have repainted it in the 'Where eagles dare' winter camo. Lookout for the video coming soon

Lovely scale looking plane to look at but has nasty wing tip stalling tendencies which broke the propellor on landing
My advise is to fly this plane on near full power in low wind conditions
All in all I would give this one a miss unless you just want a nice looking ornament for the shelf :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lovely scale looking plane to look at but has nasty wing tip stalling tendencies which broke the propellor on landing
My advise is to fly this plane on near full power in low wind conditions
All in all I would give this one a miss unless you just want a nice looking ornament for the shelf :(

Average flyer tends to drop wings if you don't stay on its more a no to light wind flyer but does look the part in the air very scale looking
Wne together fast enough very solid under carriage the supplied hingers for the contol surfaced were no require the foamed hinges work fine.
Broke the main middle propeller on a cross wind landing but as everyone keeps saying no spares ??? How can you do this to us hobby king please give us a solution here?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Average flyer tends to drop wings if you don't stay on its more a no to light wind flyer but does look the part in the air very scale looking
Wne together fast enough very solid under carriage the supplied hingers for the contol surfaced were no require the foamed hinges work fine.
Broke the main middle propeller on a cross wind landing but as everyone keeps saying no spares ??? How can you do this to us hobby king please give us a solution here?

Die Kritik, was die Flugeigenschaften anbelangt, kann ich nicht teilen. Mit einem 3S 2200 Akku stimmt der Schwerpunkt und die JU fliegt vllig problemlos.
Dass Decals sich lsen, ist wahr. Ab und an drberstreichen, fertig... oder lackieren. Das Flugbild ist klasse :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Die Kritik, was die Flugeigenschaften anbelangt, kann ich nicht teilen. Mit einem 3S 2200 Akku stimmt der Schwerpunkt und die JU fliegt vllig problemlos.
Dass Decals sich lsen, ist wahr. Ab und an drberstreichen, fertig... oder lackieren. Das Flugbild ist klasse :)

I recently bought this plane and modified it for use with three hobby king donkey 1550 kv motors, instead of the original single motor, and huge prop. I also stepped the ailerons, installed flaps, (also stepped) and stepped the elevator. To do this, I used hinges from a 1.4 meter FMS Stuka dive bomber. I used 10 amp ESC's for the motors, and the rest of the model is stock, minus the stickers, as they were coming off right out of the box. This plane flies well, but is roll sensitive, so not a beginner's plane. I found the instructions ok, and the hardware also was adequate for the job. I enjoy flying this scale model immensely! Nice plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recently bought this plane and modified it for use with three hobby king donkey 1550 kv motors, instead of the original single motor, and huge prop. I also stepped the ailerons, installed flaps, (also stepped) and stepped the elevator. To do this, I used hinges from a 1.4 meter FMS Stuka dive bomber. I used 10 amp ESC's for the motors, and the rest of the model is stock, minus the stickers, as they were coming off right out of the box. This plane flies well, but is roll sensitive, so not a beginner's plane. I found the instructions ok, and the hardware also was adequate for the job. I enjoy flying this scale model immensely! Nice plane.

I bought the JU-52 a few months ago and I can tell it was a great ARF to put together. From the beginning I didn't want it in the Luftansa colors so I found out a Luftwaffe color scheme (from the Create operation) that I liked and got to work. I added 2 extra motors (you can find how to do it on the files part), operating flaps, repainted the bird, added detail cockpit including pilots and finally created the stickers myself. In the end it became a beautiful plane. You can check some photos at the "files" part. Have fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought the JU-52 a few months ago and I can tell it was a great ARF to put together. From the beginning I didn't want it in the Luftansa colors so I found out a Luftwaffe color scheme (from the Create operation) that I liked and got to work. I added 2 extra motors (you can find how to do it on the files part), operating flaps, repainted the bird, added detail cockpit including pilots and finally created the stickers myself. In the end it became a beautiful plane. You can check some photos at the "files" part. Have fun!

Great ARF! I bought the plane for I wanted to convert it to 3 motors and paint it in Luftwaffe colors. So, I installed 2 additional motors (see files for a "how to do it", plus added pilots in the cockpit, flats and painted in the colors of the Crete operation. See files for the the pictures.
Great job HK. It was fun to build and fun to convert it to something else!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great ARF! I bought the plane for I wanted to convert it to 3 motors and paint it in Luftwaffe colors. So, I installed 2 additional motors (see files for a "how to do it", plus added pilots in the cockpit, flats and painted in the colors of the Crete operation. See files for the the pictures.
Great job HK. It was fun to build and fun to convert it to something else!

Die Qualitt ist dem Preis entsprechend man darf nicht zuviel erwarten.
Aber sie fliegt schn entspannt mit Halbgas bei Vollgas ist sie eigentlich viel zu schnell fr ihre Gre. Irgendwelche negativen Flugeigenschaften sind mir bisher nicht aufgefallen. Starten und Landen auf Rasen wrde ich besser lassen, die Ju hat schne Gummirder und ein stabiles Fahrwerk aus Stahldraht aber reit gerne samt Halterung aus dem EPO.
Damit sie auch gut aussieht habe ich meine mittlerweile auf 3 Motorigen antrieb umgebaut und mit Ju52 Scale Probs ausgerstet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Die Qualitt ist dem Preis entsprechend man darf nicht zuviel erwarten.
Aber sie fliegt schn entspannt mit Halbgas bei Vollgas ist sie eigentlich viel zu schnell fr ihre Gre. Irgendwelche negativen Flugeigenschaften sind mir bisher nicht aufgefallen. Starten und Landen auf Rasen wrde ich besser lassen, die Ju hat schne Gummirder und ein stabiles Fahrwerk aus Stahldraht aber reit gerne samt Halterung aus dem EPO.
Damit sie auch gut aussieht habe ich meine mittlerweile auf 3 Motorigen antrieb umgebaut und mit Ju52 Scale Probs ausgerstet.

While it is a nice looking plane, it is still made in China.
The stickers are peeling off from the moment you unpack it.
After the assembly, which was tedious because the instructions are incomplete and unclear, the plane just didn't want to stay in the air.

One small crash on long grass is all it took to take this thing out of commission.
Now I'm left with an overheating battery and a RX/TX. Great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

While it is a nice looking plane, it is still made in China.
The stickers are peeling off from the moment you unpack it.
After the assembly, which was tedious because the instructions are incomplete and unclear, the plane just didn't want to stay in the air.

One small crash on long grass is all it took to take this thing out of commission.
Now I'm left with an overheating battery and a RX/TX. Great.

  1. 1
  2. 2
  3. 3
Customer files
Converting JU52 to 3 motors Download [1294]
In Luftwaffe colours Download [336]
Luftwaffe Colors Crete Operation Download [3032]
HK Ju 52 Mod. Download [1440]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save