Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

HobbyKing® ™ Mini-3D GeeBee Laser Cut Kit 600 milímetros (KIT)

HobbyKing® ™ Mini-3D GeeBee Laser Cut Kit 600 milímetros (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
550 g
SKU:
HK-Mini-GBKit

Combine

essential items and
esc
battery
servo
motor
acc
Descrição
do

A primeira para HobbyKing® ™, um construtores kit tradicional! Este é o mesmo modelo que o HobbyKing® ™ Mini-3D GeeBee ARF, que uma vez construído, oferece uma combinação de uma ala ultra-grossa e enormes superfícies de controle para um excelente desempenho em 3D. Este kit oferece fácil montagem e uma peças cortadas a laser, por isso não como nos velhos tempos de cortar costelas e formadores, tornando-o uma escolha ideal para a geração ARF / RTF para obter todas nostálgico e arranhar construir um avião de novo, sem um grande tempo ou compromisso financeiro, começar a construção nesses dias de vento!

Construído corretamente o GeeBee é quase tão leve como uma shockie espuma, mas deve ser resistente o suficiente para suportar alguns golpes, para não mencionar a ser mais resistentes à erupção hangar, especialmente no que você quer manter seu esquema personalizado intocada! Eles sempre dizem que não há nada mais gratificante do que ver seu modelo construído do zero levar ao ar .... agora é sua chance de experimentá-lo!

especificações:
Envergadura: 600 milímetros
Comprimento: 550 milímetros
Voar Peso: 210g
4 Channel (acelerador, aileron, leme, elevador)

exige:
Seu próprio 4 Channel RX / TX
1500kv Micro Outrunner
10A ESC
3 x 5g micro servo
2s 800mAh Lipoly
Leve que abrange filmes de sua escolha
ferragens

Product
Specifications

Características do Produto

  • SKU:
    HK-Mini-GBKit
  • Brand:
    N/D
  • Peso ( g )
    550.00
  • Comprimento
    630.00
  • Largura:
    70.00
  • Altura:
    180.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This thing is a lot of fun. The instructions aren't great, but that's kind of expected of a scratch build in this price range.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This airplane lazercuts are not all the way through. So I had to use my scroll saw to cut plane out. Why did I buy a kit if I had to cut it out?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kit arrived in UK just before christmas well packaged and undamaged, However the long stripwood parts were missing. I decided to complete model using my own strip parts. When reported to Hobbyking they made it so awkward to supply the info they required that I had to give up. Its a poor reflection on H.king and staff. If I was trying to be dishonest I would have claimed more than just the strips.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great kit, only Issue I had was the manual calls for the fusealge to be built upside down. The vertical fin is on the wrong side of the fuse in the pictures.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1. The laser cut is not all the way through in some places.

2. Laser cut is smaller than the peice that fits into the openings meaning you need to do a trial fit up an a lot of trimming. Still better than die stamped, but could be a lot better.

3. Warped wood included so you will spend time straightening peices.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kit is a complete kit. I used the item PRODUCT ID: NS12415x10 and PRODUCT ID: MH23146-4 for making the linkages. 2xHXT500 servos for elevator and rudder, 1xHXT900 for aileron. Some trimming needed for 9gr servo placing. Made the landing gear with 3mm carbon rods and PRODUCT ID: OR006-00601. Used PRODUCT ID: Tz12A as ESC and HXM2730-1300 as motor. Also there is a big mistake in the manual when placing the F part on the A part. Do not stick these parts according to the manual because in the manual F part is sticked under the A part, not over it! Thank you HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I found someone (BoingK @ RCgroups) who has built this:

Seems you need:
4 x horns
CA Glue
A 9g servo in the wing instead of the 5g
4 x Pushrods
some Hinges or Tape
Battery strap (for fixing the battery)

According to BoingK @ RC groups:
http://www.rcgroups.com/forums/showthread.php?t=1423870#post18116314

"C20 motor fits well once you trim the fibreglass base"
"400g of thrust with an 8 inch prop on 2-cell"
"weight 220g or so ready to fly"
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kit arrived well packaged and undamaged. Total weight including balsa sheets, instructions and clear plastic bag is 184g. The balsa is of uniformly grained, good quality wood. Instructions have pictures as well as text and are very easy to follow, they also specifically recommend the C20 motor, 8x4 props and a 2s 800mAh lipo.



I will post pictures and video of fully assembled kit upon completion.



I give this kit 5 stars, but shipping was expensive. This could be avoided if they stocked in local warehouses (USA, Europe, Australia etc). To help get better value from the shipping I bundled servos, ESC, motor, props, covering film and control horns with it. This worked out well and I would recommend it to others.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
esc
battery
servo
motor
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.