New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

HobbyKing ™ X200 AC / DC Touch Screen Smart Battery Charger 10A 6S (EU Plug)

HobbyKing ™ X200 AC / DC Touch Screen Smart Battery Charger 10A 6S (EU Plug)

Discontinued Product

Please continue searching for a similar product.
SKU:
9190000013-1
WANT FREE SHIPPING? Click here to find out more!

A tela de toque X200 carregador de bateria é um projeto carregador novo e revolucionário que oferece o máximo em facilidade de uso e um estilo moderno. Com a sua enorme funcionalidade ecrã a cores de 4,3 "TFT e tocar, você vai se sentir em casa a navegar através dos menus, assim como você faz no seu smartphone ou tablet favorito.

Este é um verdadeiro "carregador inteligente" com muitos recursos intuitivos. Ele pode registrar de carga e descarga curvas da sua bateria ao exibir as informações em tempo real sobre a exibição gráfica. O software permite que você salve perfis de carga para as baterias comumente usadas fazendo o carregamento rápido e fácil. Este carregador possui muitas funções à prova de falhas tornando-se praticamente impossível cometer um erro durante o carregamento. Um construído em AC fornecimento de energia significa que você pode executá-lo em casa, ou em anexo os condutores de entrada DC e executá-lo fora de um sistema do seu carro 12V quando você está no campo.

O X200 utiliza uma nova placa de carga tudo-em-um que incorpora as fichas mais comumente usados ​​e portos de equilíbrio tudo em uma unidade arrumado. Você nunca terá que ir procurar a carga direita leva de novo, porque eles são todos aqui!

Características:
• Grande retroiluminado de 4,3 "TFT
• funcionalidade de tela de toque
• Suporta vários idiomas
• processador de 32 bits
• porta USB para carregar smartphones
• apoia a vida baterias LiPo / LiIon / / NiMH / NiCd / Pb
• Encargos 1 baterias ~ 6S Lixx em até 10A taxas de carga
• 7 modos de carga / descarga diferentes mais uma função verificador de bateria

especificações:
Touch Screen: 4,3 polegadas 480 x 272px
Faixa de tensão de operação: 11.0 ~ 18.0VDC
Faixa de tensão AC: 110 ~ 240V (EU Plug)
Circuito de Alimentação: Max 200W (carga) e Max 20W (descarga)
Carregue actual gama: 0.1 ~ 10A
Descarga actual gama: 0.1 ~ 3A
Fuga de corrente para equilibrar LiPo: 300mAh / cell
Contagem de células de bateria de lítio: 1 ~ 6
Contagem de células de bateria NiCd / NiMH: 1 ~ 16
Pb tensão da bateria: 2 ~ 24V
Dimensão: 148 x 140 x 48 milímetros

Incluído na caixa:
Carregador Tela Hobbyking ™ X200 toque
Stylus para tela sensível ao toque
cabos de energia DC removíveis
Chumbo XT60 Carga
jacaré

  • SKU 9190000013-1
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 1345.0000
  • Comprimento 280.00
  • Packaging Width 90.00
  • Altura 180.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The charger has a very intuitive control screen, it is easy to set up (even without manual, at least for technical experienced users).



The plugs are well-made (4mm bushes for battery wires and 6S balancer plug with JST XH-connector), there is even a small breakout board for variable balancer plugs (2s to 6s) in the box.



The fans are silent in idle mode, as long as the temperature is not >39C. If it rises, they start to turn and are a bit squeaky but not a big nuisance. There are two ~40mm fans in it (one each side).



There are multiple charge- and analyze modes, balanced charging, quick charging and so on. The charge/info screen is very informative, shows every neccessary information on the very good touch screen. Touch reaction of it is without hassle, quick and even working with thon gloves.



It is possible to create battery profiles and save/load those, which is a big plus.



The "long-time" graphical diagram display works very good in terms of informations at one glance on the screen.



Now to the cons: There are small disadvantages in terms of the internal build quality: Some wires are a bit short cut off, some solder points not very accurate and/or well attached, but overall it could be ways worse. The AC power PCB which delivers around 16V DC to the charger PCB is robustly build, possible shorts of contacts are prevented by plastic covering/shrinking tube, so not much to worry about if one just wants to use it.



The negative aspect I see with the touch s

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The charger has a very intuitive control screen, it is easy to set up (even without manual, at least for technical experienced users).



The plugs are well-made (4mm bushes for battery wires and 6S balancer plug with JST XH-connector), there is even a small breakout board for variable balancer plugs (2s to 6s) in the box.



The fans are silent in idle mode, as long as the temperature is not >39C. If it rises, they start to turn and are a bit squeaky but not a big nuisance. There are two ~40mm fans in it (one each side).



There are multiple charge- and analyze modes, balanced charging, quick charging and so on. The charge/info screen is very informative, shows every neccessary information on the very good touch screen. Touch reaction of it is without hassle, quick and even working with thon gloves.



It is possible to create battery profiles and save/load those, which is a big plus.



The "long-time" graphical diagram display works very good in terms of informations at one glance on the screen.



Now to the cons: There are small disadvantages in terms of the internal build quality: Some wires are a bit short cut off, some solder points not very accurate and/or well attached, but overall it could be ways worse. The AC power PCB which delivers around 16V DC to the charger PCB is robustly build, possible shorts of contacts are prevented by plastic covering/shrinking tube, so not much to worry about if one just wants to use it.



The negative aspect I see with the touch s

Good product, but needs firmware update.

I only can select English, the other languages are disabled.

Also, when finished charging, the fans are going slower, what is normal, but it keeps spinning slowly.

When you pull out power cable, and plug it in again, then noise is gone.
(or maybe this is a setting somewhere to turn of fans afther charging?)

But, anyway, it is a good product, and does the job.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product, but needs firmware update.

I only can select English, the other languages are disabled.

Also, when finished charging, the fans are going slower, what is normal, but it keeps spinning slowly.

When you pull out power cable, and plug it in again, then noise is gone.
(or maybe this is a setting somewhere to turn of fans afther charging?)

But, anyway, it is a good product, and does the job.

This is the charger the world has waited for! There are big signs on the product to read manual before use. Forget it! It's so simple to setup! With 200 W it's also very powerful and the price is really fair! This is a "must have" for every RC fan! Thanks for engineering this wonderful product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the charger the world has waited for! There are big signs on the product to read manual before use. Forget it! It's so simple to setup! With 200 W it's also very powerful and the price is really fair! This is a "must have" for every RC fan! Thanks for engineering this wonderful product!

Chargeur trs complet et facile utiliser. Beaucoup de possibilits. On peut mmoriser nos programmes prfrs. Je nai pas encore trouv comment faires des cyles de charges dcharge. Quelques petits bugs qui seront certainements corrigs la prochaine mise jour du firmware. (Changement de langue impossible.)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Chargeur trs complet et facile utiliser. Beaucoup de possibilits. On peut mmoriser nos programmes prfrs. Je nai pas encore trouv comment faires des cyles de charges dcharge. Quelques petits bugs qui seront certainements corrigs la prochaine mise jour du firmware. (Changement de langue impossible.)

First, I had a problem in the storage and discharge modes, indicating broken connection.
Now, my charger X200 indicates, in the storage and discharge modes, the double of the current, also double discharge (mAh) and the double of the power.
I had bad luck with these charger.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First, I had a problem in the storage and discharge modes, indicating broken connection.
Now, my charger X200 indicates, in the storage and discharge modes, the double of the current, also double discharge (mAh) and the double of the power.
I had bad luck with these charger.

Customer files
Doc x200 Download [2856]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking