New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Hobbywing X-Rotor ESC - 20 ampères

Hobbywing X-Rotor ESC - 20 ampères

Now save guardar 0,00 € 0,00 €

11,55 €
Estado:
Indisponível!
SKU:
9020000029-0
WANT FREE SHIPPING? Click here to find out more!

A série Hobbywing X-Rotor ESC é um controlador de velocidade multirotor boa qualidade. Eles têm uma ampla gama de recursos de programação combinados com uma curva de aceleração linear.

Nossos controladores da série Hobbywing X-Rotor vêm com uma garantia de 12 meses. Estes controladores de velocidade são vendidos em países ocidentais sob vários nomes no triplo do preço. Estamos certos de que você vai encontrá-los para ser entre os melhores BESC disponível a partir da Ásia.

Programável pelo usuário, tanto através do controlador e cartão de programação opcional. O cartão de programação é um item excelente poupando-lhe o aborrecimento de tentar usar o transmissor. Ele instantaneamente exibe as configurações atuais e alterar as configurações são tão fácil quanto alguns cliques de botão.

Spec.
Cont atual: 20A
Explosão atual: 25A
Modo BEC: n BEC
As células Lipo: 2-4
NiMH: 5-12
Peso: 13g
Tamanho: 32x24x10mm

  • SKU 9020000029-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 35.0000
  • Comprimento 110.00
  • Largura 10.00
  • Altura 110.00
  • HobbyWing X-Rotor ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good solid performance.. would be nice if preflashed with BLHeli. I do get a bit of video noise from these on my race quad.. more than I get from some dys 20 amp controls with capacitors. Good smooth power output and nice throttle response with stock out of box setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good solid performance.. would be nice if preflashed with BLHeli. I do get a bit of video noise from these on my race quad.. more than I get from some dys 20 amp controls with capacitors. Good smooth power output and nice throttle response with stock out of box setup.

Bought to use with ZMR250. much more awesome when flash with BlHeli into this esc. so many method in youtube how to flash it with arduino nano.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought to use with ZMR250. much more awesome when flash with BlHeli into this esc. so many method in youtube how to flash it with arduino nano.

??? ????? ????~~??????? ????????~~~

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??? ????? ????~~??????? ????????~~~

I bought one to test with my Multistar 4220-650Kv but it loses sync over 80pcnt throttle on 4s and 11x4.7 prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought one to test with my Multistar 4220-650Kv but it loses sync over 80pcnt throttle on 4s and 11x4.7 prop

I wanted to see how these did on my new build. I used these along with the Multistar Elite 2204-2300KV. as it turned out, this is the smoothest, most responsive model I have built. I have been flying them for over six months now and have not had one hiccup. These are now my preferred ESC's and will be using them on all of my builds!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I wanted to see how these did on my new build. I used these along with the Multistar Elite 2204-2300KV. as it turned out, this is the smoothest, most responsive model I have built. I have been flying them for over six months now and have not had one hiccup. These are now my preferred ESC's and will be using them on all of my builds!

Very good ESC. Works fine with my NAZA (throttle calibration min 1000s - max 2000s), very smooth with stock settings on 1000kV motors. I've seen a lot of ESCs from inside and a lot of strange soldering... I was surprised this ESC is soldered so well and has a nice layout. The FETs have good thermal contact to the aluminumplate. The wires are AWG18, the exact weight is 14,6g.
One thing is suboptimal: Because of the capacitor on the input you cannot fix the ESC flat to a frame. Just heat the shrinkingtube and bend the cap carefully away.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good ESC. Works fine with my NAZA (throttle calibration min 1000s - max 2000s), very smooth with stock settings on 1000kV motors. I've seen a lot of ESCs from inside and a lot of strange soldering... I was surprised this ESC is soldered so well and has a nice layout. The FETs have good thermal contact to the aluminumplate. The wires are AWG18, the exact weight is 14,6g.
One thing is suboptimal: Because of the capacitor on the input you cannot fix the ESC flat to a frame. Just heat the shrinkingtube and bend the cap carefully away.

Using them on a f330 quad on 3s with 1000kv motors with 8x4.5 props and they don't even heat at at all. Over all build quality is very good to. will be using the 40a versions in the future on a larger quad or hex.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using them on a f330 quad on 3s with 1000kv motors with 8x4.5 props and they don't even heat at at all. Over all build quality is very good to. will be using the 40a versions in the future on a larger quad or hex.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!