Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)

HXT 2435 (370S) 4040kv Brushless Inrunner

HXT 2435 (370S) 4040kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
98 g
SKU:
HXT2435-4040
Descrição
do

Motor Tamanho: 2435 (370S)
Velocidade: 4040kv
ESC necessário: 18A
Faixa de tensão: 6 ~ 12v
Sem carga Curr: .9A
Carga máxima: 25A

Diâmetro: 24,2 milímetros
Duração: 37 milímetros
Frente Montagem Distância Hole: 16mm
Frente Mount Thread Size: M3
Diâmetro do eixo: 2,3 milímetros
Comprimento do eixo: 12mm
Peso: 65grams

Product
Specifications

Características do Produto

  • SKU:
    HXT2435-4040
  • Brand:
    N/D
  • Peso ( g )
    98.00
  • Comprimento
    95.00
  • Largura:
    40.00
  • Altura:
    50.00
  • Kv ( rpm / v )
    4040.00
  • Correntes Max (A)
    25.00
  • Potência (W):
    280.00
  • Comprimento B (mm):
    37.00
  • Pode Comprimento D (mm)
    35.00
  • Max Tensão ( V)
    12.00
  • Shaft A ( mm):
    2.00
  • Unit Weight (g):
    65
  • Diâmetro C ( mm )
    24.00
  • Comprimento Total E ( mm)
    49.00
  • Resistência (MH ):
    93.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered two of these motors along with a lot of other items for a GWS A10. I found that one motor had a 2mm shaft and the other a 2.3mm shaft. Just a note to others to check and let HC know. Read their policy and act quickly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered two of these, but got Turnigy B2435-4040 delivered instead???



It is a good engine ans has the same specs but:......



The engine shaft on the turnigy b2435-4040 is 2.3 mm and NOT 2 mm.



So, beware if you are hoing to use this on a GWS EDF 55 rotor. These rotors need a 2mm shaft!







verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Me parece un buen motor, que helice le pondriais para un modelo de 650gr?

seria este motor bueno para un FunJet?



Gracias.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor on my Blade CP heli. Works great and is a direct fit! I recommend running with one or two heat sinks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent performance in a modified Artech SU-27 Flanker. A bang for the buck...

About 20 amps. at full trhottle with a 64 mm fan. Perfect...

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was testing this motor 2 days in a row. It doesn't get that much hot with a heat sink on it. It's not that fast, BUT I was running very small pinion with it. 4400 version would be definitely better, but if you want a motor for Mini Inferno and then lend it to someone because you don't want that person to wreck your car... it's a good choice.



Even if I'm saying it's not too fast, don't be mistaken, with a higher pinion it would be lot faster.



For this price it's a very good thing to try.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As said before this motor is good for 55mm 6-blade EDF's. I got 16-17A at full throttle producing 165 watts with a Loong-Max 3s1300mah20c. After about 10 sec. it smoothed out to around 16A and about 150 watts. The motor ran smooth and was very responsive and didn't get hot at all. I gave it four stars due to the fact that one of the three I ordered had really bad un-even windings that didn't line up in the can properly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent Motor! Used it in the popular Blade CP Heli. After burning out 2 big name motors I decided to try a more cost effective solution. No regrets. Runs cool during forward flight but also handles extended hovering. Already recommended this motor to friends. Perfect solution for the Blade CP series helicopter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i'm a very happy for this motor. Motor is a good made and for the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After reading Kelly's review, I make a purchase immediately because I have the same experience by burning Hacker E30 and AXI Mini Model.



I do never feel sad of buying this motor because it give me no disappointment. I put it in my HB King-2. It is running very hot, but it have not burnt out like the other two.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.