Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

HXT 2835 (380S) 2200kv Brushless Inrunner

HXT 2835 (380S) 2200kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
150 g
SKU:
HXT2835-2200
Descrição
do

Motor Tamanho: 2835 (380S)
Velocidade: 2200kv
ESC necessário: 25A
Faixa de tensão: 6 ~ 12v
Sem carga Curr: 0,4 A
Carga máxima: 32A

Diâmetro: 28,2 milímetros
Duração: 37 milímetros
Frente Orifício de montagem Distância: 19 milímetros
Frente Mount Thread Size: M3
Diâmetro do eixo: 3,2 milímetros
Comprimento do eixo: 12mm
Peso: 102grams

Product
Specifications

Características do Produto

  • SKU:
    HXT2835-2200
  • Brand:
    N/D
  • Peso ( g )
    150.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    2200.00
  • Correntes Max (A)
    32.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    37.00
  • Pode Comprimento D (mm)
    36.00
  • Max Tensão ( V)
    12.00
  • Shaft A ( mm):
    3.00
  • Unit Weight (g):
    102
  • Diâmetro C ( mm )
    28.00
  • Comprimento Total E ( mm)
    49.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Looks very nicely made. Will put it an easystar. 5,5x4,5 apc electric prop. I hope for some nice climb rates.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After having read the reviews of this motor, i bought this motor with the 6x4 prop as recommended by other users. have been using it since april 10 on my easy star. it breathes new life into the foamie. I very strongly recommend this combo for anyone with an ez*. use it with a 2200 or 2600mah 3 cell lipo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Outstanding motor. A perfect fit for MPX EasyStar!

Just started RC-ing six months ago, this was the first motor I bought, for my first plane, a Multiplex EasyStar. I was advised to use this motor instead of the stock brushed motor that came with the kit. Was this a great advice or what!?
The motor fits perfectly in the original motor housing (it's glued into the EPO in EasyStar, I believe in the Bixler now, too), and, coupled with a 6x4 or 6x5 prop, and a 3S battery, the EasyStar can climb almost vertically, or achieve super-fast level flight.

Just bring them back to stock, HobbyKing :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome motor! It works great on the EasyStar, but when is the motor going to be back in stock???? It has been out of stock for over a month.
Sam
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought one for my Easy Star and it was defective (not started).
I bought another one (I must remember to buy everything from a wild pair of Hobby King when the price is low!) With a 6x4 prop is great. The Easy Star take off from the hands as an arrow even with half throttle and climbs vertically so incredible. Very Good!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great in my modded easystar. With a 2200mah 3s lipo it spins a 6x4 prop and can carry my gopro with ease.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have used it on 70mm edf and after 2 minutes it burned! The strange thing is that it was only 25th in 6s. 550watt but it was very hot. that sucks!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed it as recommended by the community in an FPV Easystar, It worked great for a while but last day I needed power so it ran 5mn at 22A (I can tell with the OSD) and suddenly the motor collapsed.

So it is an OK motor but do not run it at max more then 1mn on 3S with 6x4 Prop. Will try the other version of this one (with heatsink).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ordered 2 for a robbe concorde project,only 1 works,now need to order another and send faulty 1 back. QC's should test better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
is really a good engine, done well and with great sensitivity and softness. But I do not think its a 2200kv. Why has the same performance 2100kv uotrunner turnigy.
70mm EDF with 5 blades and lipo 6s 2450mAh 30c turnigy ago: 24A and 550watt.
70mm EDF with 6 blades and lipo 6s 2450mAh 30c turnigy ago: 32A and 700watt.
A little hot but everything to normal.
Then he has another problem:
TREE is short and can not be used with EDF 70mm 3 blade high speed because this EDF uses a tree-style vemotech very short. Both components are not compatible.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
As part of EasyStar setup download now [420kb]

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.