New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

KB45-08XL 1600kv Brushless Inrunner

KB45-08XL 1600kv Brushless Inrunner

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
Peso:
600 g
SKU:
KB45-08XL
WANT FREE SHIPPING? Click here to find out more!

KB45-08XL 1600kv Brushless Inrunner
Kv: 1600RPM / V
Peso: 557g
Shaft: 6mm
Tamanho: 77x45mm
Tensão: 36v
maior potência nominal: 3528W
Este motor tamanho vai caber a nossa maior 5inch e 4.75inch EDF perfeitamente. (buracos mesma e fixadores de tamanho do eixo)

Estamos ainda à espera na fábrica para dados mais detalhados sobre estes motores e atualizará este anúncio uma vez que temos isso.

  • SKU KB45-08XL
  • Brand -
  • Peso ( g ) 600.00
  • Comprimento 0.00
  • Largura 0.00
  • Altura 0.00
  • Kv ( rpm / v ) 1600.00
  • Correntes Max (A) 0.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 36.00
  • Potência (W) 3528.00
  • Shaft A ( mm) 6.00
  • Comprimento B (mm) 77.00
  • Diâmetro C ( mm ) 45.00
  • Pode Comprimento D (mm) 75.00
  • Comprimento Total E ( mm) 97.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

this is the best way for waste 50usd in a low quality motor ...... crazy spent of energy and extremely hot for a motor of 600gr ..... i dont recomend buy this garbage-motor :(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is the best way for waste 50usd in a low quality motor ...... crazy spent of energy and extremely hot for a motor of 600gr ..... i dont recomend buy this garbage-motor :(

magnet exploded after many high speed runs. great value of motor, but you will need a good cooling system to keep the heat off, i used air cooling and the motor failed but im sure with liquid cooling it be fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

magnet exploded after many high speed runs. great value of motor, but you will need a good cooling system to keep the heat off, i used air cooling and the motor failed but im sure with liquid cooling it be fine.

i have this in my red cat rally 1/5 . I have heard they run hot . There is a 1/5 motor heatsink and fan i bought that also . Just running it at 6s and the current draw is 51 amps . Haven't put it through its paces yet . But if temps are reasonable I will try for 7s and 8s. Stay tuned.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have this in my red cat rally 1/5 . I have heard they run hot . There is a 1/5 motor heatsink and fan i bought that also . Just running it at 6s and the current draw is 51 amps . Haven't put it through its paces yet . But if temps are reasonable I will try for 7s and 8s. Stay tuned.

Superb motor! Tested at 6S and 130Amps. Incredible power! Do not hold it for too long at full power unless you make sure this it is cooled down either by a water jacket or front and back holes on motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Superb motor! Tested at 6S and 130Amps. Incredible power! Do not hold it for too long at full power unless you make sure this it is cooled down either by a water jacket or front and back holes on motor.

This motor is a monster. Installed on a Traxxas Summit using the Hobbyking 150a ESC using 20t pinion 62t spur. Bash for 30 mins both esc and motor are only warm. I'm not into speed too much and this motor has plenty. This thing has so much torque and it's cheap. I used a dremmel to whittle the shaft down to 5mm. A tutorial is available on you tube to do this. Very pleased.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is a monster. Installed on a Traxxas Summit using the Hobbyking 150a ESC using 20t pinion 62t spur. Bash for 30 mins both esc and motor are only warm. I'm not into speed too much and this motor has plenty. This thing has so much torque and it's cheap. I used a dremmel to whittle the shaft down to 5mm. A tutorial is available on you tube to do this. Very pleased.

The Monster is really a good buy Working in a high speed love it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Monster is really a good buy Working in a high speed love it

very powerful motor but if you make this hot you burning the controler or you brake the magnet in rotor.

its good for car.

i have 3 of them broken.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very powerful motor but if you make this hot you burning the controler or you brake the magnet in rotor.

its good for car.

i have 3 of them broken.

Motor hat 3,5kw stimmt schon, ABER fr kurze Zeit, auf dauer sind eher 800w angesagt wegen Ueberhitzung, ausser man bohr die Schilde auf.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor hat 3,5kw stimmt schon, ABER fr kurze Zeit, auf dauer sind eher 800w angesagt wegen Ueberhitzung, ausser man bohr die Schilde auf.

grain silos for my Revo! 5S and HK150A tearing the road...http://www.youtube.com/watch?v=pXz4Qb8csGc

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

grain silos for my Revo! 5S and HK150A tearing the road...http://www.youtube.com/watch?v=pXz4Qb8csGc

I couldn't start and work this motor when i was connecting the motor to the reciver,esc and lipo there isn't any sound to program and sound?



Can anyone help me to how can i start this motor?



Thank you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I couldn't start and work this motor when i was connecting the motor to the reciver,esc and lipo there isn't any sound to program and sound?



Can anyone help me to how can i start this motor?



Thank you.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!