Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

KD36-50-07S 5000kv Brushless Inrunner (T9)

KD36-50-07S 5000kv Brushless Inrunner (T9)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
267 g
SKU:
KD36-50-07S

Combine

essential items and
acc
Descrição
do

Os inrunners KD36 são equivilent para motores 540 de tamanho.

Dimensões: 36 ~ 50 milímetros
Frente montar buracos são 25 milímetros de distância.
tamanho do eixo: 5mm
Peso: 220 g

Spec.
Kv: 5000rpm / V (T9)
Ociosa atual: 6.1A
Resistência: 0,0045
Max Amp: 97A

Product
Specifications

Características do Produto

  • SKU:
    KD36-50-07S
  • Brand:
    N/D
  • Peso ( g )
    267.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    5000.00
  • Correntes Max (A)
    97.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    51.00
  • Pode Comprimento D (mm)
    49.00
  • Max Tensão ( V)
    0.00
  • Shaft A ( mm):
    5.00
  • Unit Weight (g):
    220
  • Diâmetro C ( mm )
    36.00
  • Comprimento Total E ( mm)
    68.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Have installed this in a Traxxas Slash together with HK 100a ESC. Have tried the combo with 2s and 3s, but have not tried it with 4s yet.

At first testrun I was not able to do full speed with 3s, because it reached to high speed and startet to fly. Have to adhust the car, with a wing in front to keep the front wheels on the ground. Shoul be possible to reach speed 120km/h +++
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor. For the price you will be hard pressed to find a better one.

Only concern at this time is the temp the motor runs at. I have a limited selection of 5mm pinions so I have ordered some new 48 pitch pinions and will try regearing to remove some heat from the motor.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good quality motor. For the price you are going to be hard pressed to find a better one.

Only concern is the motors tends to run a little on the hot side. This maybe due to my limited pinion options at this time.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
here is a test http://www.youtube.com/watch?v=am8b1tFbkQA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm looking to put this on a fast flying wing, maybe two of them. What props are ideal for fast flying? 6x5.5? 7x7?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super moteur mont dans un Buggy 4x2,plein de puissance et de couple
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely powerful motor! I used this in my Rustler with 3s lipo and I think it's even better than the castle 5700kv motor! Just be careful with the motor wires because the plastic around them shatters really quick...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tengo montado este motor en un Traxxas Slash, junto con un variador de 60A, relacion 18/86. Haciendolo trabajar con Lipos 3S tiene una aceleracion brutal y una velocidad punta expectacular. Hay que ir muy cuidadoso con el gatillo, pero me cepillo a los nitrosos, jejeje.



Totalmente recomendable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Same issue as CiberDog except I noticed it upon initial inspection (so no burned up ESC for me). Wire insulation is so brittle that it falls off if the wires are bended at the base of the motor. The exposed wires end up touching the endbell. I won't dare to connect this to any ESC
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the motor itself so powerful and work great with deepvee



verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.