Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

KD36-60-11L 2200kv Brushless Inrunner

KD36-60-11L 2200kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
331 g
SKU:
KD36-60-11L
Descrição
do

Os inrunners KD36 são equivilent para motores 540 de tamanho.

Frente montar buracos são 25 milímetros de distância.
Dimensões: 36 x 61 milímetros
tamanho do eixo: 5mm
Comprimento do eixo: 14 milímetros
Peso: 293g

Spec.
Kv: 2200rpm / V
Ociosa atual: 2.6A
Resistência: 0,0146
Max Amp: 55A

Product
Specifications

Características do Produto

  • SKU:
    KD36-60-11L
  • Brand:
    N/D
  • Peso ( g )
    331.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    2200.00
  • Correntes Max (A)
    55.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    61.00
  • Pode Comprimento D (mm)
    59.00
  • Max Tensão ( V)
    22.00
  • Shaft A ( mm):
    5.00
  • Unit Weight (g):
    293
  • Diâmetro C ( mm )
    36.00
  • Comprimento Total E ( mm)
    75.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bonjours, alors j'ai acheter ce moteur y'a 1 ans, je l'ait monter sur un bateau rc de 80cm ! et j'ai aucun soucis avec ! les cages avant et arriere sont viser pas comme sur les feigao ou c'etait juste coller !!!

Je recommande !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A lot of power, I use on my boat
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Today I received a parcel with this motor.
He opened the package, and then this motor all scratched and torn with holes for the mounting threads.
It feels like someone before me has enjoyed it! ... The horror did not even know what to do?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am wanting to purchase this motor for a ProBoat Stiletto tunnel haul upgrade. Can anyone tell me how many poles these motors have? Regards
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Simply amazing!! using it in a DBX-E conversion, on 4s and geared 17/46 it does 65km/t, and on 5s it pulls WHEELIES! and this is a buggy with nearly no ground clearance and center diff.
awesome problem only "prob" is heat, but goes on and on! would say 6 out of 5 stars! (because of what you get for the price..)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Benutze den KD in meinem Rex-X/Air Attack Brushless Umbau an einem 4S Tunigy Lipo und mit einem 14er Motorritzel am orginal HZ.
Damit erreiche ich 70Km/h (mit Gps gemessen!).

Der Motor ist gut verarbeitet und hat enorm viel Power.
Leider wird der Magnet innen sehr warm (schtze 70-80C).
Er kann die Whrme nicht schnell genug nach Auen ableiten.

So muss ich leider alle 10 min eine kurze Pause machen, damit der Motor nicht berhitzt.
Ich betreibe den Motor einfach am Limit (50A sind in der Beschreibung empfohlen: bis 95A zieht der Motor laut Data-Logger).

http://www.youtube.com/watch?v=ZlgPoyXWoFs

Hier ein Video von meinem eRex mit dem KD
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this in a 1/8 buggy. It was a little powerhouse until the end popped off on the first run. I don't think it unscrewed itself... I'm pretty sure it stripped the threads right off. Also, it had epoxy inside that was used to balance the shaft.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe diesen Motor in einen Jamara X2 Truggy. Habe schon einige Akkuladungen durch. Bin sehr zufrieden. Fr das Geld echt der Hit. Lsst sich auch sehr gut steuern mit dem HK-150A ESC. Super Combo. Kann diesen Motor jeden empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otimo motor uso em um Inferno GT2, com bateria 5000mah 4s 20c, 21t/46t, estou acertando o carro ainda mas recomendo o motor, estou pensando em pegar o 2800kv tambem..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muito bom motor uso em um Inferno GT2, uso 4s 20c, estou acertando ainda mas gostei dos resultados, estou pensando em pegar o 2800kv tbm. Otimo preo.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.