Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

KD36-74-15XL 1100kv Brushless Inrunner

KD36-74-15XL 1100kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
390 g
SKU:
KD36-74-15XL
Descrição
do

Os inrunners KD36 são equivilent para motores 540 de tamanho.

Frente montar buracos são 25 milímetros de distância.
Dimensões: 36 × 74 milímetros
tamanho do eixo: 5mm
Peso: 370 g

Spec.
Kv: 1100rpm / V
Ociosa atual: 1.1A
Resistência: 0,0257
Max Amp: 45A

Product
Specifications

Características do Produto

  • SKU:
    KD36-74-15XL
  • Brand:
    N/D
  • Peso ( g )
    390.00
  • Comprimento
    0.00
  • Largura:
    0.00
  • Altura:
    0.00
  • Kv ( rpm / v )
    1100.00
  • Correntes Max (A)
    45.00
  • Potência (W):
    0.00
  • Comprimento B (mm):
    75.00
  • Pode Comprimento D (mm)
    73.00
  • Max Tensão ( V)
    0.00
  • Shaft A ( mm):
    5.00
  • Unit Weight (g):
    370
  • Diâmetro C ( mm )
    36.00
  • Comprimento Total E ( mm)
    91.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I used the engine in a boat about 65cm long and 8 kilos, a coil cooled with water, batteries 3S, 5S, 6S and a 120A drive, the boat goes very fast and the engine does not heat anything, motor very efficient and convenient.

He usado el motor en un barco de unos 65cm de largo y 8 kilos de peso, refrigerado por un serpentin con agua, con baterias 3S, 5S, 6S y un variador de 120A, el barco va muy rapido y el motor no se calienta nada, motor muy eficiente y recomendable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used to ask my 21 ... just a little heavy ....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este adaptado en un planeador Graupner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
vou testar este motor em meu Multiplex Mentor... Deve ficar muito bom!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor. Very cheap and powerfull. I used it on 1/8 scale brushless convertion with mamba monster max esc and 5000mah 4s LiPo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good motor for glider up to 3,5 kg and hotliner up to 2,5 kg. Folding Prop 13x6 and 3 Lipo about 45 A. Folding Prop 10x6 and 4 Lipo about 40 A.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i mounted this motor in a e-revo 1/8 with 21T Pinion on 6S and XERUN 150A ESC.

The Motor runs verrry smooth, the e-revo is running arount 50kph and has a runtime over one hour on 6S 5000. the temperatur was 40C, the max Power 1300 Watts, and the max Amp arount 60A. I Think thats a great setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using it in 1/8 scale buggy 14thoot pinion paired with 2 2000mah 20c. Great litle setup. Dont forget to buy the heatsink because this motor come hot after few race
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wow, what a great motor! Running this in my 42" mono. With 6 cell, and 180A esc. It's super fast!



As many here say that it runs a bit hot, is true.

So you have to beef up your cooling on this engine.



Overall this is a good engine!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hei.jeg purchased this engine brusehless.whitch pinion gears do I need?. shaft 5mm.what have e revo original 2.5 or 3.0mm? some one who knows? explain to me how formal send a link so I can bestille.takker for all reply takk.mvh roy
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.