New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Quanum MadCow 3D Multirotor controlador de vôo

Quanum MadCow 3D Multirotor controlador de vôo

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9736000001-0
WANT FREE SHIPPING? Click here to find out more!

Quanum MadCow 3D Multirotor controlador de vôo

O Quanum MadCow é um excitante 3D controlador de vôo projetado especificamente para o vôo multirotor 3D e corridas. vôo 3D é a próxima geração de multirotor voando para adicionar ao seu repertório. O MadCow FC torna tão fácil de usar e tem excelente desempenho. Utilizando um STM32 processador de alta velocidade.

Obter todos os seus velhos truques e realizá-las invertido. 3D é a maneira de empurrar o envelope de vôo a ainda mais extremos.

O controlador de vôo Madcow vem predefinido com cinco modos de vôo.
1. Modo Tipping: (modo Acro) 0-100% da faixa de aceleração corresponde a apenas rotação do motor normal. Neste modo, o multirotor não vai manter equilíbrio de nível automaticamente enquanto roll e pitch são centrados. Também conhecido como "acro" ou no modo "manual".
2. Modo de grelhar: (modo estabilizado Acro) 0% - 100% da faixa de aceleração corresponde a apenas rotação do motor normal. Neste modo, o multi-rotor irá manter o equilíbrio nível automaticamente enquanto roll e pitch são centrados. O multi-rotor ainda vai virar and roll e o ângulo de inclinação não é limitado. Isso é muitas vezes chamado de "horizonte" ou no modo "ratititude", mas não é capaz de vôo invertido.
3. Modo Bovino: (modo estabilizado) 0 - 100% da gama de acelerador corresponde apenas a rotação normal do motor. Neste modo, o multi-rotor irá manter o equilíbrio nível automaticamente enquanto roll e pitch são centrados. O multi-rotor não vai virar and roll eo anjo de inclinação é limitada. (Este modo pode funcionar como um modo de recuperação, se você está voando 3D e perder a orientação. Mudar para este modo irá rapidamente rolar a mutirotor volta ao vôo normal e manter o equilíbrio)
4. Modo de matadouro (Modo 3D) 0% - 50% do intervalo corresponde ao acelerador do motor de rotação invertida, 50% - 100% da gama do acelerador corresponde à rotação normal. Neste modo, o multirotor não vai manter equilíbrio de nível automaticamente enquanto roll e pitch são centrados. Também conhecido como "acro" ou no modo "manual", mas com a inversão adicional de motores para o vôo invertido.
5. Madcow modo: (modo 3D estabilizado) 0% - 50% do intervalo corresponde ao acelerador do motor de rotação invertida, 50% - 100% da gama do acelerador corresponde à rotação normal. Neste modo, o multi-rotor irá manter o equilíbrio nível automaticamente enquanto roll e pitch são centrados. Isso é muitas vezes chamado de "horizonte" ou no modo "ratittude", mas com adição de inversão dos motores para o vôo invertido.

MadCow é um controlador de vôo excelente para explorar o mundo de voo 3D.

Características:
• controlador de vôo 3D
• Fácil de usar
• Desempenho excelente
• Processador de alta velocidade STM32 F302 CCT6

especificações:
Processador: STM32 F302 CCT6
Núcleo: Cortex - M4 com FPU
Tamanho: 38.5x26.5x12.5mm (sem cabos)
Peso: 8,5 g (sem cabos)

inclui:
controlador de vôo 1 x Quanum MadCow 3D
2 adesivos x montagem
1 x cabo USB
set 1 x Cabo

Nota: A configuração padrão é para o Quanum Chaotic 3D Quad com a frenagem ativa e Oneshot125 ESC.

  • SKU 9736000001-0
  • Brand Quanum
  • Capacidade ( mAh) -
  • Peso 76.0000
  • Comprimento 102.00
  • Packaging Width 40.00
  • Altura 85.00
  • Quanum MADCOW 3D Multirotor Flight Controller
  • How to set up your MCFC
  • Madcow GUI
  • Flying the MCFC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

typical hobby king. i bought this when it first came out wanting to put it onto a trickster as advertised. but as always empty promises here on hobbyking as it can't support tricksters even while 3d mode is turned off. also the software doesn't even work on mac while in the files they have stated "mac version coming soon" well its been over 6 months now and still no update and no support for mac books and tricksters. its a shame as the board itself is fantastic and built very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

typical hobby king. i bought this when it first came out wanting to put it onto a trickster as advertised. but as always empty promises here on hobbyking as it can't support tricksters even while 3d mode is turned off. also the software doesn't even work on mac while in the files they have stated "mac version coming soon" well its been over 6 months now and still no update and no support for mac books and tricksters. its a shame as the board itself is fantastic and built very well.

Just got a second one. Tried itout with Orange SBUS Rx this time.
You need to press RC calibration button during setup for the FC to scan the ports and recognise the type of rx connected. Rotation speeds 360 pitch/roll, 300 yaw.
Gain 100 basic and 50 attitude is a good starting point for 250-450 quad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got a second one. Tried itout with Orange SBUS Rx this time.
You need to press RC calibration button during setup for the FC to scan the ports and recognise the type of rx connected. Rotation speeds 360 pitch/roll, 300 yaw.
Gain 100 basic and 50 attitude is a good starting point for 250-450 quad.

Yes, this is my 2nd review and after realizing the error was 100pcnt MINE I'm admitting it and giving this amazing thing the review it deserves.
1 - It fits in the smallest of copters and looks awesome.
2 - It performs better than any fc I've used (CC3D, NAZE). It has rock solid stabilization, and very precise movement.
3 - Its ridiculously easy to program once you download the software from the files tab.
4 - It's dirt cheap and outperforms fc's that are 3 times the price.

Buy it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yes, this is my 2nd review and after realizing the error was 100pcnt MINE I'm admitting it and giving this amazing thing the review it deserves.
1 - It fits in the smallest of copters and looks awesome.
2 - It performs better than any fc I've used (CC3D, NAZE). It has rock solid stabilization, and very precise movement.
3 - Its ridiculously easy to program once you download the software from the files tab.
4 - It's dirt cheap and outperforms fc's that are 3 times the price.

Buy it.

Absolutely awesome! Everybody must have one. Very easy to setup and works great.
I was flipping my quad around in no time. Start with 100 basic and 50 attitude gain.
Works great with SymonK flashed esc's even without OneShot but I recommend PWM (active braking) on. Wow Hobby King!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolutely awesome! Everybody must have one. Very easy to setup and works great.
I was flipping my quad around in no time. Start with 100 basic and 50 attitude gain.
Works great with SymonK flashed esc's even without OneShot but I recommend PWM (active braking) on. Wow Hobby King!

Does the job but not much else. Decent auto level but not many customization features.

Hobbyking sent me a defective board which the gyro "zero point" constantly changes on even after calibration. I will be contacting Hobbyking about this problem soon. I'm not the only one with this problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Does the job but not much else. Decent auto level but not many customization features.

Hobbyking sent me a defective board which the gyro "zero point" constantly changes on even after calibration. I will be contacting Hobbyking about this problem soon. I'm not the only one with this problem.

Started out great on my sk450 and by 3rd flight quad went crazy in the air.I've re-calibrated reset and went over this thing repeatedly it will not hold calibration Gyros are defective I have a video you can watch to see using the Mad Cow software how the Gyros think it's still moving even though it's sitting still. hobbyking did replace it for me hope this one is better...

https://www.youtube.com/watch?v=qPI6fxMgnIU

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Started out great on my sk450 and by 3rd flight quad went crazy in the air.I've re-calibrated reset and went over this thing repeatedly it will not hold calibration Gyros are defective I have a video you can watch to see using the Mad Cow software how the Gyros think it's still moving even though it's sitting still. hobbyking did replace it for me hope this one is better...

https://www.youtube.com/watch?v=qPI6fxMgnIU

First impression was pretty bad. I've never received a faulty item before, I guess I'm lucky, But I believe this thing is defective. It always responds differently in the calibration set-up screen. And it will not control my motors correctly, spins them at random and will not un-arm during flight tests, so it just keeps spinning the motors at random. I've spent a couple hours trying to fine tune it... no luck. I will change my review if the exchange works.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First impression was pretty bad. I've never received a faulty item before, I guess I'm lucky, But I believe this thing is defective. It always responds differently in the calibration set-up screen. And it will not control my motors correctly, spins them at random and will not un-arm during flight tests, so it just keeps spinning the motors at random. I've spent a couple hours trying to fine tune it... no luck. I will change my review if the exchange works.

I received this FC in May 2016. Connected everything and my transmitter is communicating with the board. I just can't the board to arm the motors.On the motor tab page when i press motor test nothing is hapenning. The save button also does does the same thing. I received a replacement from HK but it is still doing the same thing. Anybody has a solution ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I received this FC in May 2016. Connected everything and my transmitter is communicating with the board. I just can't the board to arm the motors.On the motor tab page when i press motor test nothing is hapenning. The save button also does does the same thing. I received a replacement from HK but it is still doing the same thing. Anybody has a solution ?

A great FC for beginners or experts. The GUI setup software is easy and intuitive and allows the option for basic or advanced settings. Out of the box the default, simple settings flew stable. 3d can be turned off to get a feel for the PIDs before trying inverted flight. I will continue tuning as I prefer a more crisp feeling response, however I haven't tried the current settings with 3d flight. One area of improvement - I would really like to see this fc include a barometer for altitude hold while inverted (version 2 perhaps?).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A great FC for beginners or experts. The GUI setup software is easy and intuitive and allows the option for basic or advanced settings. Out of the box the default, simple settings flew stable. 3d can be turned off to get a feel for the PIDs before trying inverted flight. I will continue tuning as I prefer a more crisp feeling response, however I haven't tried the current settings with 3d flight. One area of improvement - I would really like to see this fc include a barometer for altitude hold while inverted (version 2 perhaps?).

This is a great board....... easy to set up in the GUI.... flies great on my 250. The only down side is that the instructions dont show how the OSD is to be set up but I guess that will come sometime... Going to purchase another couple just in case..... for set up vids and info you can check out my youtube channel ..... moochasas .... here to help others.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great board....... easy to set up in the GUI.... flies great on my 250. The only down side is that the instructions dont show how the OSD is to be set up but I guess that will come sometime... Going to purchase another couple just in case..... for set up vids and info you can check out my youtube channel ..... moochasas .... here to help others.

  1. 1
  2. 2
Customer files
MadCow Manual Download [5818]
Madcow 3D assistant software Download [19498]
Madcow Manual (updated for OSD) Download [6777]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking