A equipe Kingkong ter feito isso novamente. Usando seu popular quadro 260 FPV eles adicionaram um grande pacote de engrenagem para fazer uma excelente Plug and Play pacote completo com câmera FPV e Vídeo TX.
Este multirotor é alimentado pelo Kingkong Força 200 Multirotor condução conjunto de equipamentos. O kit tem tudo que você precisa de um controlador de vôo pré sintonizada mini-CC3D para baixo para o Spironet Antena.
Os motores são Kingkong 2204-2300KV (CW e CCW) desenvolvido por Kingkong 12A OPTO BLHeli ESC do. Com uma potência UBEC (5V 3A) ao APO. 6040 Hélices irá acelerar o seu ritmo.
Há uma câmera FPV e vídeo TX tão só sintonizar pré-instalado no canal e começar a voar. A câmera FPV é angulado para que você veja onde você está indo quando a corrida está ligado.
Apenas para garantir que seus concorrentes saibam onde você está há faixa de LED super brilhante na parte traseira como isso vai ser a única parte que eles vão ver.
Esta embalagem emocionante não só olha a parte, mas vai dar-lhe horas de diversão de corrida a um preço justo.
• fibra de vidro unibody totalmente moldado reforçado, chassi
• Kingkong 2204-2300KV Motors (CW e CCW)
• Kingkong 12A 2-4S OPTO BLHeli ESC do
• Kingkong 5V-3A UBEC
• alimentação e vídeo placa de distribuição com XT60
• Mini CC3D controlador de vôo
• 6040 Hélices (CW e CCW)
• Câmara FPV 1000TVL CMOS
• 200mW 5.8GHz Transmissor áudio / vídeo
• 5.8GHz Circular polarizada Spironet Antenna
• câmera de Acção montagem
• módulo de LED Super brilhante (Certifique-se de sua competição sabe que é você mais de tomá-los!)
Distância entre eixos: 260 milímetros
Peso: 138g (quadro nua)
Material: Nylon + Fiber
KV (RPM / V): 2300KV
Tensão: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 440g
Número de polos: 12N / 14P
Hélice: 5 "-6"
Prop eixo: 5mm
Motor Shaft: 3mm
Diâmetro: 28 milímetros
Comprimento: 31,2 milímetros
Peso: 26 g
Espaçamento de buraco de parafuso: 16mm ou 19 milímetros M3
Tensão de entrada: 7.4-14.8V (2-4S LiPoly)
Constantes: 12 Amps
Explosão: 20 ampères (5 segundos max.)
BEC: No BEC, OPTO única
Peso: 7,5 g (com fios)
Tensão de entrada: 6V ~ 28V / DC (2-4S LiPoly)
Tensão de saída: 5V
Ripple: Constante: 3 Amps
Peso: 12 g
Especificações da câmera:
Tipo de Lente: F2.0 / 2,8 milímetros (IR-CUT)
Tensão de entrada: 5 ~ 12V DC
Ângulo de visão: 120deg
Vídeo TX Especificações:
Modular: Wideband FM Modular
Formato de vídeo: NTSC / PAL
Impedância de saída: 50 Ohm
Potência de saída: 23 ~ 24dBm
Tensão de funcionamento: 7V ~ 24V
Temperatura de operação: -10 ~ 85
Vídeo Largura de Banda: 0 ~ 8,0 MHz
Áudio Frequência portadora: 6.5MHz
Entrada de vídeo Nível: 0,8 ~ 1,2 Vp-p
Impedância de entrada de vídeo: 75 Ohm
Áudio Nível de entrada: 0,5 ~ 2,0 Vp-p
Áudio Impedância de entrada: 10K Ohm
Dimensão: 40 x 23 x 8 milímetros
Peso: 10 g (sem antena)
Banda A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Banda B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Banda F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
1 x Kingkong 260
20 x 6040 Pros (10CW + 10CCW)
1 x Spironet Antena
1 x ESC adaptador de comunicação software PC
1 x acção de carne humedecido montar
pack 1 x Cabo
pacote de laço 1 x Cabo
set 1 x antena de montagem
1 x cabo USB
5-6 Canal RX / TX
1300-2200mah 11.1V; 1000-1800mah 14.8V
Características do Produto
Capacidade ( mAh)
Peso ( g )
What can i say,i am blown away by this quad. Having moved into this side of the hobby, i didn't want to spend a lot but i must say this performs like a much more expensive model. Had trouble hooking into Librepilot till i found an incorrect driver on my computer. Once that was sorted i was able to set this up using the Hobbyking FPV Racer profile.It's on bank one at the moment but as a noobie it's perfect, stable and responsive. If you are trying this sport for the fist time, you can't go wrong with this quad, top marks Hobbyking, definitely a winner.Fun quad!! This is my first racing quad, and although a little nervous about how to set everything up it turned out to be very straight forward. I downloaded the Libre-Pilot GCS software (available at: https://librepilot.atlassian.net/wiki/display/LPDOC/Downloads), and prebound my Spektrum satellite receiver with a primary receiver instead or going through the painful binding process. Once bound you plug your satellite receiver into the front left port and go through the Libre-Pilot wizard to setup and calibrate. It's that simple. Video worked great and aircraft flies awesome.Very good racer for price.
If you are starting with fpv racer it's a good choice.
Here a video of my first flight with a fpv (and my kingkong by the way) :
Very cheap and easy to repair !great frame for beginners and pricingonly problem is when you break a arm you have to pull it ll apart and does get a bit annoying after 2 or 3 crasheswow this thing is alot of fungreat quad .
it took some time to to make it fly with my aurora 9 system but at the end it's flying.
the tx is bul......
the quad fly fast and you find yourself loosing video very fast.
lucklly i found it lost in the fields only with the rear red light.
order fatshark 400mw tx for the future flights.
ilanI recently got these at what was a great price and now they are even lower. I was skeptical at first but apparently these got a bad rep for reasons I don't experience. I did receive 1 that the rear LED bar was shorted out of the box and smoked out even with a smoke stopper installed. Good thing I ordered 2 sets of frames which came with and extra light bar. The original got so hot it popped a LED off. The other thing. This was my first time using a CC3D FC and it was a total nightmare to get it flashed and going as I wanted it.
Now for the rest of the story. I am truly impressed so far. Much like their props that have saved me tons of money, these 260 class UAV's are a fantastic value at their current price. Are there areas I modified before the first flight? You bet! Some like the vtx zip tie needed a bit of help. The antenna needed put through the rear hole and then supported by plastic mold or one could use hot glue. There are things they could have done better IMHO but again ... Try to build one half as good for the money. I found it impossible.
Unless it develops some kinda voodoo and flies apart, next few times out, I call it a winner in many ways. Or at the very least a sleeper value.I really really wanted to like this quad. Almost everything is perfect for a beginner who doesn't want to learn how to design/build them all themselves, except the frame. The frames are so fragile its not funny. What are you going to do when you start out? Crash. I bought this kit, and the 2 replacement frame kit and I have already broken two frames from only light crashes. The worst part is that the weak point of the frame is near the motor, so when the frame breaks it tears the motor off the ESC, destroying the motor. This means I have had to replace the motors as well.
Every other component on the quad works really well and is value for money. Since the price has been dropped so much since I purchased it a few weeks ago it might actually be worth buying this for parts. I will continue to use the FPV camera and transmitter, motors, ESCs, FC, and props, but I will be transferring them over to a carbon fiber frame. Don't skimp on the frame like I did. Save money on any other component.Excellent racing quad for this price range! Flies really good and is a awesome racing quad for beginners. Be aware though; there are no documentation at all in the box, so you'll have to spend some time getting to know it.
Couple of tips:
1. Download LibrePilot to set the quad up. Just use the vehicle setup wizard, and then the transmitter setup wizard afterwards and you should be good to go!
2. If you're using the taranis with the X8R module and want to use your SBUS-port, you get a cable in package that fits in the main port (the one in the back, on the right hand side of the FC), and that has 4 pins on the other end. From the outer side of the SBUS-port, you want to plug in the black wire, the red wire and then the yellow wire. You don't have to use the green wire, just hide it in the quad (or cut it w/e).
But all in all, a great quad at a great price :)A brilliant little quad, well built, good components and well finished. The camera and VTX are good and should be more than okay for close fpv racing/flying. The motors are powerful and pair nicely with the ESC's. The frame is very strong/sturdy and the PDB is also very good and nicely incorporated into the frame. The flight control board is okay, i would say it has some limitations as it is a CC3D and I don't know how long the support will last for openpilot but it can be swapped out at a later date. It is more than enough for beginners/intermediate flyers such as myself.
To flash the board you will need openpilot 15.2 (just go to openpilots website) plug it in and it has a set up wizard that makes it all really easy. Of course you will need to have a radio and spare receiver too. Overall really happy with this purchase but I would say you would need some existing experience with quads/openpilot.