Laser230 FPV Drone Composite Kit (230 milímetros)

• Overall
• Quality
• Value

ottimo affare

May 10, 2019

Nel complesso il frame è robusto e di buona qualità,forse i bracci flettono un po ma a livello non professionale è un ottimo modo per cominciare a creare un drone fpv di tutto rispetto.
Personalmente sono pienamente soddisfatto.

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 01, 2016

good frame for the price. flies well but a bit heavy (180g)

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 09, 2016

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 26, 2015

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 15, 2015

Excellent frame. No complaints at all. Highly recommended.

• Overall
• Quality
• Value

Customer Rated

Feb 04, 2015

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

• Overall
• Quality
• Value

Customer Rated

Jan 25, 2015

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 15, 2014

high quality, nice design.

• Overall
• Quality
• Value

Customer Rated

Dec 08, 2014

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

• Overall
• Quality
• Value

Customer Rated

Nov 15, 2014

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.