Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • International (Hong Kong)

sistema de energia Micro w / Gearbox GPS-C03

sistema de energia Micro w / Gearbox GPS-C03

Now save guardar 0,00 € 0,00 €

18,45 €
Indisponível!
Stock:
OUT OF STOCK
Peso:
17 g
SKU:
GPS-C03

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do
outrunner brushless micro com sistema de engrenagem.
binário enorme para um sistema motor pequeno.
Especificações:
Tipo: Brushless
Dimensão: 20 x 13 milímetros
Comprimento do eixo: 8,5 milímetros
Diâmetro do eixo: 1 milímetro
Peso: 3,6 g
Max Power: 12W
Max Tensão: 4V
Max atual: 3A
RPM: 4V / 36,700rpm sem carga
Prop sugerida: GWS 5030
Dados de teste;
GWS 5030
Tensão: 3,7, 4V
Atual: 1.70, 1.90A
Watts: 6,29, 7.6W
Thrust: 59, 65g
Rendimento (g / w): 9,38, 8,55
Product
Specifications

Características do Produto

  • SKU:
    GPS-C03
  • Brand:
    N/D
  • Peso ( g )
    17.00
  • Comprimento
    72.00
  • Largura:
    15.00
  • Altura:
    65.00
  • Kv ( rpm / v )
    9175.00
  • Correntes Max (A)
    3.00
  • Potência (W):
    12.00
  • Comprimento B (mm):
    18.00
  • Pode Comprimento D (mm)
    4.00
  • Max Tensão ( V)
    4.00
  • Shaft A ( mm):
    1.00
  • Unit Weight (g):
    3.6
  • Diâmetro C ( mm )
    23.00
  • Comprimento Total E ( mm)
    34.00
  • Resistência (MH ):
    0.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I get about 40 g thrust on one cell with the recommended prop so I'd say the quoted thrust figures are a bit optimistic. I'm now running it with a 6030 prop.
It's better suited to slower flying models because the thrust and current draw drops off noticeable in flight so it gives good flight times and helps the model fly at a fairly constant speed indoors. Good for slow aerobatics, but of you want something to fly fast indoors, go for the AP03 7500kV motor instead on a 4025 prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using two of these GPS-C03 motors direct-drive (without the gearbox) turning propellors from an Airhogs Rolling Fury plane. Installed the two motors in a scratch built micro A-10 Warthog. Running a 200mah lipo and with throttle management I fly 6-8 minutes on a charge. Pleased with the motors in this application as I can fly vertically at full throttle and float around at less then 1/2. Only awarding four stars because the motor balancing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awsome motor/gearbox. works perfect on small indoor 3D planes. i use a 6x3 prop and the 1 gram ESC with no troubles at all. have baught many and will buy many more. THANK YOU HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am buying two more to mod my new Air Hogs A10



It weight the same as the 7mm motor used in airhogs planes but the speed is much more powerful.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got two units, and they both are underpowered compared to the spec provided. However...

I installed 1mm quality ballbearings on one of them, and lubricated both with high-grade low viscosity oil.

They both achieved more thrust with lower amp readings, so there is a potential here!!

If you cannot afford ballbearings ($5 a piece), then at least lubricate these units!

As for tougher shafts, I use 1mm carbon rod. If it breaks, just replace it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Staerkster 1S Antrieb in der 30-40g Klasse! Endlich kann ich mit der PZ su26m torquen.

Vorteile:

1.sehr leicht

2.funktioniert super gut mit HK 100mah 20C



Nachteile:

1.Schlechte Qualitaet des Getriebes - sehr laut

2.Die Welle ist sehr weich. Verbiegt sich bei jedem Kontakt des Propellers mit dem Boden. Als Ersatz passt prima eine Welle von Kyosho minium mit D=1mm

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this on 16" yak with:

- GWS 5030 prop

- HK 3A 1s ESC

- AR6400

- 2 spektrum 1.5g servos

- 350mAh 1s20c



AUW = 40g



I shortened the generously long shaft to reduce vibrations evident in certain throttle settings even on a balanced prop. Even though the stated thrust > 60g I found it a struggle to produce the thrust to hover a 40g AUW platform making the listed test results seem optimistic. The shaft is very soft and will bend upon any soft impact. Mounting this unit is also bit tricky.



Although people state this is the more efficient and powerful motor in its weight, next time i'd rather add +1 gram and save $10 for an oversized direct drive outrunner to produce the same results without any of the hassles associated with this gearbox.



The specifications are very appealing but the real results are not as outstanding - not for me.



4 stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very soft shaft.. had to modify it to use it with 3A ESC and Ar6400, thrust just enough to hover my 39g YAK,

but definitly more power than 4-Site's motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Im using this on a 32gram nano profile plane it allows me to do large controlled loops and prop hang with ease .I have struggled to get this sort of performance from a direct drive motor so well done Hobby City but Please Please Please get a toughened shaft for it as the supplied one is so soft and as such I cant give it 5 stars

Prop used 5043 battery 100man 20c zippy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great with my 31 gram White Sport Monoplane. Produces 25 g of thrust w/4.5X3 prop. TGY PD 3A 1S 1g BL ESC works perfectly with this motor system.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.