Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Mig 15 35 milímetros EDF Micro Jet EPO (ARF)

Mig 15 35 milímetros EDF Micro Jet EPO (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
880 g
SKU:
M15-35-ARF

Combine

essential items and
esc
battery
servo
Descrição
do

Esta pequena Mig 15 é incrível, EPO espuma combinados com o seu estatísticas pluma significa que será muito indulgente do desembarque estranho inferior a 100%. A unidade de ventilador de 35 mm incluído eo modelo vem em 1 peça então tudo que você tem que fazer quando chega é encaixar o seu próprio & servo ESC, ligar as hastes de controle e chifres, ligar o equipamento de RC a um Receptor que usa conectors Micro JST e você está pronto para ir ......

Não só o transporte do modelo para evitar cabide de erupção, mas os bolsos peças em espuma de embalagem são ideais para a realização de reposição Lipoly de e você vai se divertir muito com isso, eu iria levar alguns! Este Mig é tão bonito, até mesmo a sua esposa vai gostar!

especificações:
Envergadura: 390 milímetros
Comprimento: 390 milímetros
Voar Peso: 95g
EDF: 35mm com 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC (Obrigatório)
Servo: 3 x 2 g (Obrigatório)

Características:
Tanques de queda opcionais
Magnetic Canopy & Fan escotilha
Pré-instalado Horns Controle

inclui:
Livro de instruções
Barras de controlo

exige:
4 Channel TX com 4 Channel Micro RX (Micro JST Conector Compatible)
Bateria 7.4v 350mAh 2s Lipoly
3 x 2 g Servos
6A ESC

Product
Specifications

Características do Produto

  • SKU:
    M15-35-ARF
  • Brand:
    Não
  • Peso ( g )
    880.00
  • Comprimento
    525.00
  • Largura:
    150.00
  • Altura:
    410.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wow this model is great - flies on rails - I use a turnigy plush 10A ESC and 3S 350 & 500mAh Zippy Compact lipos and this thing howls- really good power and speed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Despite of some ESC proplems and a windy and gusty surrounding (4 bf), I had the first flight today: I had a really nice fligt (you have to be quick at the controls!). It was easy to build, the CG in the manual is OK. (I had to put about 8g to the front). Stabilizer was a bit bent. I could correct it with some hot air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I first bought the twin edf but like to assemble the stuff myself so got this one too. Fuselage is pre-assembled but wings have to be glued, edf too with electronics of own choise. Much better and great fun. Also see the RCG thread with ID 1452474.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just add a HK12A ESC a thrust tube a R415 receiver some HK282 servos a carbon wing spar some dremel work in the avionics bay, finally add a 3S460 Nano tech battery shake vigorously and you have a silver bullet.
Oh the factory CoG works too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice Plane!!!

i use it in this configuration:

Servo: TGY-D1290P High Speed Micro Servo 0.35kg/0.07s/2.9g
Speed Controller: TURNIGY Plush 10amp 9gram Speed Controller
LiPo: Turnigy nano-tech 460mah 3S 25~40C Lipo Pack

So its a little Rocket :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aereomodello molto ben fatto che conviene montare con i servi da 2.5gr

per una maggiore precisione.

Purtroppo ho comprato per questo modello"come da istruzioni" le batterie da 2s

con le quali vola molto male con poca potenza "per questo 4 crowns".

Ho risolto il problema mettendoci le rhino 3s 360 che pero' entrano molto

male nel modello.

Ho dovuto per il bilanciamento aggiungere oltre alla batteria piu' pesante

10 gr sul davanti.

Con questa configurazione e' eccezionale, vola in un modo meraviglioso!

ps: speriamo che il motore non si bruci.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've tested the mig with 2s 350mha nanotech, not enough thrust and after 3min of flight (3,9v each cell) I have difficult to stay in air at full throttle :|
Otherwise it's very easy plane to fly in no wind condition.
This is my first plane and, after a couple of hours with FMS, I had no problem to do my first fly with it (I have not flown any plane before), very funny.
Some problems with CG in the begin but easily correct and after all ok.
I've crashed it only in windy (15-20km/h) condition.
The canopy came out easily during accidents so, if you don't want to lose it, it's better to use a rubber band to hold it in place.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The kit arrived very well packed-no damage, well done HK. I am waiting for the Rx that HK is promising, hoping not too long.

The 2g. servos recomended fit the openings well and seem to have the same plugs as the Futaba micro rx, but this rx is too big for the model.

The servo leads are too short, need to be about 25-50 mm longer to reach the rx from the wings. HK should fix this!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Model is definately for advance modelers. One should be able to solder precisely and be very accurate.



Setup:

3S 450 mAh Nano LiPo

10A Turnigy Plus ESC

2.5 g servos HC

4ch Frsky rx

0.8mm connectors from HC



RTF: 112 g

CG: Where aileron servowires enter the fuselage.



Mods:

Added 2 mm triangle balsa on all the trailing edges

Repaired elevator hinge with UHU Por glue

Used ultra thin servo wires from HC (black and red)



My EDF was running very smooth on 3S, so no balancing was needed.



I throw underhand with 3/4 throttle, no problems at all if you have flown EDFs previously. Recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
cont......

first toss. It stalled on me and went in (video coming soon). A nice firm dart like push straight out is the best method for this and will see the model take to the skies immediately. I was impressed with the way it flew and only needed a minor trim. The best way to describe it is "a pocket rocket"! Remember, this is not a big jet. It is tiny. Fast for this might be considered slow to some who have high power larger jets. I could keep up with a 50mm Hawk that was flying at the time for a speed reference.

Conclusion:
Skyangel models have done well and I commend them for introducing a cheap micro jet to the market. It's a fun model, you get what you pay for and it can handle a nose in without breaking. What more could you ask for? :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • 35mm EDF MiG 15

Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
esc
battery
servo

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.