Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

Distribuidor Mini Poder DP BEC

Generating Links

Distribuidor Mini Poder DP BEC

Preço:

Now save economize 0,00 € 0,00 €

75,94 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
373000009-0
Envio Grátis? Clique aqui aprender mais!

Min Poder Distribuidor UBEC adequado para modelos 30cc além movidos a gás.

Esta unidade tem grandes recursos, que incluem: entrada de bateria duplo, 5v isolado linear RX BEC, 20 Amp tensão ajustável UBEC em todos os canais de saída, 8 canais de entrada de RX com saídas duplas em cada canal - simplificar superfícies de controle dupla servo.

Grandes inclusões são o regulador 5V linear independente fornecendo uma fonte de alimentação separada para o receptor, opticamente isolada poder CDI & incorporado matança de ignição remota. fontes de energia receptor, Servo & CDI estão completamente isolados uns dos outros.

Este é o primeiro sistema Distribuidora de Energia a segurança ninho o receptor dentro da distribuição de energia 'block' encurtando assim lances de cabos, acrescentando proteção para o seu toda receptor importante e acelerando o tempo de configuração.

Características:
• 5v Linear RX BEC
• 20 Amp Servo UBEC
• Os usuários de tensão UBEC ajustável
• 8 canais de entrada (um CDI de corte)
• 16 canais de saída
• LEDs de verificação 5 Estado
• bandeja receptor acolchoado e Seguro de montagem
• CDI alimentação isolada
• CDI controle de ignição remota (corte remoto)
• CDI luz indicadora de status de energia
terminal de saída de energia • CDI
• LED CDI monitor de tensão

Opcional: Indicação da tensão de entrada / saída com interruptor de alimentação externa

Spec:
Canais de entrada: 8 (+1 CDI cortados)
Canais de saída: 16
Tensão de entrada: 6V-13V
Servo UBEC atual: 20A (30Amp Burst)
Tensão de saída: 4.8-9.7V (usuário ajustável; padrão é 5.2V)
Poder RX: bec linear 5v
Temperatura de trabalho: -20 a 85 graus C
Peso: 80 g
Dimensões: 116 milímetros x 88 milímetros x 13 milímetros

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

J.A. | Comprador Verificado

  • Overall
  • Quality
  • Value

Good, but be careful

Dec 21, 2018

A very nice device. But it involves a potential danger: the 5V power supply to the receiver has only 1A. This is just enough for the receiver and the internal ignition switch. But it is not enough for powering any other device from the receiver. I tried it: already with 1 servo the voltage-drop causes the receiver to stop working. So: DO NOT CONNECT ANY EXTRA DEVICE (Servo, ESC, SBUS Decoder etc.) TO THE RECEIVER!!
But there is a “workaround” if you want to connect additional devices: use the 20A power supply and to achieve that you have to do the following:
- disconnect both (!) red wires from the servo-connectors ;
- take a short female-female Futaba-lead and remove the black (ground) and white (signal) wires completely;
- take, on 1 side, also the red pin out of the connector and put this pin into the middle (!) position of one of the servo connectors;
- put the other side of the servo-lead into one of the (double) servo slots.
I did not cut away the two loose red wires but did put a shrink wrap over the pins. By doing that it is possible to bring the power supply back to its original state eventually.

Douglas | Comprador Verificado

  • Overall
  • Quality
  • Value

Almost the same as the yellow one.

Oct 17, 2017

The only difference I can see between this one and the yellow one is that this has 20A bec and the yellow has 30A bec. Then why is this more expensive?? I don't know, maybe cuz black is "cooler"..?? Works great for me, dual battery supply, adjustable bec voltage, I set mine to 6v. Easy to set with a simple voltage meter. It would be nice if it had led V display, but that would add more $ and not really neccessary, imho. I will get another for my next 30cc bird, maybe the yellow one, but I don't really need 30A bec!

Jorge | Comprador Verificado

  • Overall
  • Quality
  • Value

Question

Jan 21, 2017

Excuse my ignorance Which batteries do you recommend for use with 8 standard servos?
Thanks :)

michael | Comprador Verificado

  • Overall
  • Quality
  • Value

NO MORE POWER PROBLEMS EVER AGIN!!!!!

Dec 15, 2016

i have this ajustable power distributer in all my planes its the CATS MEE-OUH !!! TWINN BATTERY ADJUSTABLE POWER THERE OUT THERE FOR A HECK OF ALOT MORE$$$$$$ LIKE TWICE THIS PRICE. GET ONE AND YOU WILL NEVER HAVE A POWER PROBLEM AGIN !!!! FROM THE AVIATER UNCLE MIKE IN MENDOCINO CALIF

Patrick.Jurek@al | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2015

Gute Akkuweiche Funktioniert super fr ganz kleines Geld.

Benutze Sie in einer 2,70m Extra mit 10 Servos auf 8,4 Volt

DrifterTR | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 26, 2015

It is the best product for power distribution. Going to use on 1/4 piper cub

Arquivos de clientes
Altimètre.pdf Download [558]
german manual Download [13]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!