New Items News Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

MKS DS1210 Titanium Engrenagem Servo (0,12 seg / 10 kg-cm)

MKS DS1210 Titanium Engrenagem Servo (0,12 seg / 10 kg-cm)

Shipped From:
  • International (Hong Kong)
Discontinued Product

Please continue searching for a similar product.
SKU:
DS1210
WANT FREE SHIPPING? Click here to find out more!

Dispondo de um trem de engrenagens de titânio e água / poeira caixa selada à prova o MKS DS1210 pode ser deixada cair na água, coberto de lama ou enterrados na areia e ainda voltar para mais! Perfeito para caminhões e buggies. servos MKS são muito respeitados em Taiwan, Coréia e Japão.

especificações:
Banda morta: 0.002ms (Padrão)
Sistema de controle: + Largura de Pulso controle
Freqüência de trabalho: 120Hz
Pulso (RX) Requerido: Pico 3.0 ~ 5.0 Volt para Peak Square Wave
Tensão de funcionamento: 4.8 ~ 6.0 V Volts DC
Faixa de temperatura operacional: -10 a + 60 graus C
Velocidade de operação (4.8V): 0,15 seg / 60 ° graus sem carga
Velocidade de operação (6V): 0,12 seg / 60 ° dagrees sem carga
Stall Torque (4.8V): 8,05 kg-cm (292,4 oz / in)
Stall Torque (6V): 10 kg-cm (365,3 oz / in) 360 °
Modificáveis: NÃO
Tipo de Motor: DC Motor
Potenciômetro de Drive: Direct Drive
Tipo de driver: FET
Tipo de rolamento: Dual Rolamentos
Tipo Caixa de velocidades: Metal Gear
Programável: NÃO
Comprimento conector de fio: 15,0 cm (5,9 in)
Dimensões: 40X20X40.30 mm (1.5748X0.7874X1.58 in)
Peso: 56 g (1,97 onças)

  • SKU DS1210
  • Brand -
  • Capacidade ( mAh) -
  • Peso 185.0000
  • Comprimento 0.00
  • Packaging Width 0.00
  • Altura 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!

Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.

At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.

This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.

Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)

Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.

I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.

Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL

Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.

I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking