servo série DS4X0 projetado para uso em pequenas planador e helicóptero e todos os R / C passatempo, o servo motor sem núcleo apresenta excelente resolução e metal gear centering.The conter dois rolamentos jóia. O topo caso foi melhorado com um bronze axial bucha para maior resistência e estabilidade para garantir longevidade e rotação suave!Especificações:Tensão de funcionamento: 4.8 ~ 5.0VTorque: 4.8V / 2,37 Kg.cmVelocidade: 0.089s / 60 °Tamanho: 22.5x10x23.5 mmTipo Caixa de velocidades: Todos os Metal GearsPeso: 10,9 g
Aplicar com 200 ~ 450 USO DO HELICÓPTERO SMALL
servo Glider Digital (Aplicar aos 10mm asas finas de planador)
Aplicar para o 12 ~ 18 centímetros Robot
quadro comparativo abaixo;
Características do Produto
Peso ( g )
Speed ( Sec / 60deg )
Torque ( kg) ( min. 0,01 kg )
Unit Weight (g):
A ( mm ):
C ( mm )
D ( mm ):
E ( mm):
F ( mm )
Parfait pour un cyclique d'hlico format 450, spcialement pour le flybarless car plus rapide et pinions mtal. Silencieux, fiables (les miens ont plus de 10 heures de fonctionnement et ne montrent aucun signe de faiblesse). N'hsitez pas, surtout pour du flybarless, car un servo dfectueux et c'est la ruine de votre machine donc de votre porte monnaie, sachant qu'ils sont dispos en france au double du prix!! On peut les faire tourner en 6V pour plus de rapidit, mais ils ne seront plus garantis.I'm using this servo on the tail of my hk450. In general I'm quite happy with it. But please be careful with the voltage of your BEC. The servo max. rating is 5 V whereas e.g. the SBEC of the 40A Mystery ESC is 5.5V. If you use it with 5.5V it becomes very hot and doesn't hold your tail properly. I soldered a diode into my servo cable and everything is working fine now.Very good servo for 18 car size. Very fast and powerful enough. I broke my steering ends but servo is well.I was disappointed. I was looking for something to replace Hitech HS65MG servos and these looked good on paper. They are a little less expensive, mount the same and have a higher torque and faster transit. The torque measured within 4pcnt as did the speed so I was hopeful.
The disappointment came when I set them up on a 48" EF Edge 540 and they would not stop oscillating near center on the elevator. The movement covered about 6 degrees which in a plane like this could be devastating. I tried 5 servos with exactly the same result and decided I would not trust this expensive 3D plane to these. I bought instead the Hitech Digital equivalent, HS5065MG and they work perfectly.
They may work great in a heli but in an airplane, beware.I received recently an order of 4 DS470's.. the one's which were working are just GREAT.. but unfortunately I also received one servo on this order which had an failure and I had to re-order a substitute for it. therefore only 3 stars. In the meantime i ordered another bunch of these, hopefully these will all work. If so, it's clearly a 5 star plus!This is a rock solid Servo. I put this on my HK450 and the thing flys just like my friends Align. The tail holds even in very strong wind. Match this up with a Great gyro and you will have a Heli that will complete any manuever quickly and accurately.Vyzeraju super len dvam 4 hviezdy kvoli tomu e jedno chod aie, uvidme ako sa budu chova s bezpadlovou elektronikou.This specification is false.
In addition, the operating speed is too slow, too slow reaction rate.
After 0.2 seconds to move the transmitter stick is feeling the movement of the servo.
Maybe compatibility issue with the receiver, but that behavior is neuringeon.
I will use. Walkera 2801 Pro
But neutrality is good.Type your review here.
Try to include as much data as possible.ulkj ztj lnkmgn hughudfh hui h uhyxdv n iufh we hfhfu fdsh usidfhihfuewuhdsh g dfgh r rgI buy this servo on the tail of the helicopter HK450. Servo drive has a maximum signal frequency to 333 Hz, metal gears, high speed response. http://www.mks-servo.com.tw/goods.php?goods_id=ds470