-
Descrição
do -
Apresentando a série hélice de fibra de carbono Multistar. Porque a construção de carbono é muito mais forte, podemos fazer os adereços ultra fino permitindo que estes adereços para oferecer maior desempenho com consumo de corrente reduzida e maior eficiência. Perfeito para o seu projeto multirotor, estes suportes 9x4.7 polegadas são incrivelmente duro e muito bem feito utilizando fibra de carbono de alta qualidade. Eles apresentam um tecido apertado dando força máxima e são pré-equilibrada para que você pode simplesmente parafuso-los e você vai longe. Estes têm um hub DJI então caberá diretamente ao seu DJI multi-rotor sem modificação.
especificações:
Diâmetro: 9 polegadas
Pitch: 4,7 polegadas
Hub Espessura: 7,0 milímetros
Diâmetro do eixo: 8mm (DJI montagem)
Peso: 8,6 g cada hélice
Nota: Estes suportes são para uso exclusivamente eléctrica. -
Product
Specifications -
Características do Produto
-
SKU:
445000032-0
-
Brand:
MultiStar
-
Peso ( g )
23.00
-
Comprimento
230.00
-
Largura:
15.00
-
Altura:
55.00
-
Afastamento Y ( Inch)
4.70
-
Material
Carbon Fiber
-
Rotação:
CW/CCW
-
Unit Weight (g):
Não
-
Digitar
Multirotor
-
Contagem de lâmina
2
-
Diâmetro X ( Inch):
9.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
These are fitting very well the original DJI E300 2212/920Kv motors; need to be balanced; are demostrated strong in some crash or hitting some light obstacles.
great product
Compatibilità perfetta con i motori DJI E300 2212/920 Kv; hanno bisogno di essere bilanciate; si sono dimostrate molto robuste durante i crash e nei casi di urto con ostacoli leggeri
Molto consigliate (da provare anche le 10x4.5, in quanto con le 9x4.5 non si raggiunge la potenza massima esprimibile dai motori 2212/920, pur avendo alimentazione a 4S
Very good props for my SK450 quad copter. I was using similar 8" CF but with these my amp draw is down by one full amp helping efficiency and flight time.
They needed some sanding to balance but I think these are a great value. The stiffer CF construction helped a stability issue I had in my SK450.
Highly recommended!I bought these to use on my MT2213-935KV MultiStar Motors.
They work fantastic. I went through a couple of bushes, and they still are in perfect condition.
The only thing is that the logo is not on the blades as shown in the picture.
Fantastic product. Hope you will stock it again.Arrived after backorder and prolonged shipping. one was already chipped and delaminating a little on one edge. Basically disintegrated on first flight attempt. Garbage.These are decent CF props, hub quality could be a bit better, though. They have DJT hub fitting and come with no rings to fit on smaller shafts. No logos were on my propsI am very happy with this propeller. So far it flies nice and smooth. -
Upload
Videos -
Upload
Files -
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!