New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Multiwii MWC FC Bluetooth Módulo Programador (Android compatível)

Multiwii MWC FC Bluetooth Módulo Programador (Android compatível)

Shipped From:
  • USA
QTY:

Now save guardar 0,00 € 0,00 €

7,27 €
Estado:
Disponível
Peso:
19 g
SKU:
9387000028-0
WANT FREE SHIPPING? Click here to find out more!

Este módulo Bluetooth acessível é usado para configurar o controlador de vôo Multiwii sem fios a partir do seu dispositivo Android. Você precisará baixar o aplicativo Multiwii Configuração Android para o dispositivo móvel para usar este módulo.

Funções MultiWii Configuração App:
• Ler e Escrever PID
• Definir ajuste de switch para AUX1 e AUX2
• receptor de sinal do monitor e saída de sinal FC
• Monitorar todos os sensores e sinal de GPS
• A calibração para Magnetometer e acelerômetro
• Guardar e ler o perfil
• atualizado para convencer mais Molex 1,25 milímetros plugue

especificações:
Conectividade: Tomada TTL Bluetooth / UART
Dimensão: 37.5x15x5mm
Peso: 4g / 7g (w / cabo)

Parâmetro padrão:
Taxa de transmissão: 115200
Nome do módulo: HB02
Código par: 1234

Incluído:
módulo Bluetooth x 1
UART 4Pin cabo de 200 milímetros x 1

  • SKU 9387000028-0
  • Brand Unknown
  • Capacidade ( mAh) -
  • Peso ( g ) 19.00
  • Comprimento 60.00
  • Largura 15.00
  • Altura 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I was adjusting PIDs from my phone in no time. Great product and a must if you need to make changes to your flight controller in the field.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was adjusting PIDs from my phone in no time. Great product and a must if you need to make changes to your flight controller in the field.

Using this with a homemade MultiWii controller, works fine out of the box. I see others say they've used with with 5v, but not for me. I'm running it through an adafruit level converter, just needed to add a 3.3v circuit to my controller. Recommended and would buy again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this with a homemade MultiWii controller, works fine out of the box. I see others say they've used with with 5v, but not for me. I'm running it through an adafruit level converter, just needed to add a 3.3v circuit to my controller. Recommended and would buy again.

Absolute must have for naze32

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolute must have for naze32

Decent Bluetooth chip. Was easy to install on Naze32 running cleanflight 1.9.0 plug and play. I use it with EZ-GUI on my Note4. Ive mounted it on the underside of a 180mm quad with Velcro, and get ~10m range LOS in parks. Good for monitoring vBat (I have no radio telemetry), and tuning PIDs during a session. Ive also used it to configure Cleanflight on my laptop connected via Bluetooth. The heatshrink is decently thick and provides good protection. The included leads are colour coded, and the PCB includes an ordered label. With total weight is approximately 4.5 with the leads, which can be re-crimped. They are the typical 2.54mm with single-position housings (I swapped to 2x 2-position).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Decent Bluetooth chip. Was easy to install on Naze32 running cleanflight 1.9.0 plug and play. I use it with EZ-GUI on my Note4. Ive mounted it on the underside of a 180mm quad with Velcro, and get ~10m range LOS in parks. Good for monitoring vBat (I have no radio telemetry), and tuning PIDs during a session. Ive also used it to configure Cleanflight on my laptop connected via Bluetooth. The heatshrink is decently thick and provides good protection. The included leads are colour coded, and the PCB includes an ordered label. With total weight is approximately 4.5 with the leads, which can be re-crimped. They are the typical 2.54mm with single-position housings (I swapped to 2x 2-position).

j'utilise sur les cartes basecam 32bits et ca marche impeccable.plus de port usb qui gene pendant les auto pid sur les nacelles 3 axes...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

j'utilise sur les cartes basecam 32bits et ca marche impeccable.plus de port usb qui gene pendant les auto pid sur les nacelles 3 axes...

I give it 4 stars because the lack of documentation, which can be found by a small amount of google magic. Other than that it works prfectly. Default settings it comes with are: Name HB-02, Password 1234 and 115200 baud.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I give it 4 stars because the lack of documentation, which can be found by a small amount of google magic. Other than that it works prfectly. Default settings it comes with are: Name HB-02, Password 1234 and 115200 baud.

This product is create because you can use it to create a Bluetooth bridge from your say, tablet to the 900mhz telemetry transmitter. This is great because you get a clean set up, and not all tablets support USB host mode for the transmitter! Remember, to swap your Tx and Rx round when you connect to your telemetry radio!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This product is create because you can use it to create a Bluetooth bridge from your say, tablet to the 900mhz telemetry transmitter. This is great because you get a clean set up, and not all tablets support USB host mode for the transmitter! Remember, to swap your Tx and Rx round when you connect to your telemetry radio!

works as advertised with android devices. Board is set to the correct baud rate so no mods are required using an FTDI board. Trying to see what I need to do to get it to work with IOS devices so more to come ...maybe.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works as advertised with android devices. Board is set to the correct baud rate so no mods are required using an FTDI board. Trying to see what I need to do to get it to work with IOS devices so more to come ...maybe.

Fonctionne bien avec la Naze 32. Bonne qualit de realisation. Bon produit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fonctionne bien avec la Naze 32. Bonne qualit de realisation. Bon produit.

ormai le allmie control board non faccio mai mancare uno di questi

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ormai le allmie control board non faccio mai mancare uno di questi

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!