New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Multiwii Módulo display OLED I2C 128x64 Dot (MWC)

Multiwii Módulo display OLED I2C 128x64 Dot (MWC)

Discontinued Product

Please continue searching for a similar product.
SKU:
387000035-0
WANT FREE SHIPPING? Click here to find out more!

O MWC OLED é usado para telemetria e depuração de qualquer MultiWii FC com I2C, e com um rácio de contraste de alta e os dados de visualização de tela super brilhantes na luz solar direta não é problema.

Apenas algumas das funções visíveis no OLED são: exibição de status, versão do firmware MWC, modo avião, desbloquear status, valor do sinal de entrada remota, o valor do sinal de saída FC, giroscópio e status de aceleração, Período de sinal / erro I2C, tensão e corrente ( se o seu MWC tem a tensão e sensor de corrente). No modo de programação pode exibir e ajudar a definir os parâmetros, definições da função de interruptor AUX, ajuste de parâmetros PID, Suavidade Accelerator / ajuste de curva e você mesmo pode fazer e mostrar que você próprio logotipo, a lista continua.

Características:
• Alto brilho, auto-emissão, alta taxa de contraste
• Monochrome 128 × 64 dot
• 3.3V ~ de interface I2C 5V
• Usado para a telemetria e depurar MultiWii FC.

especificações:
Dimensão: 30mmX26mm
Altura: 7,0 milímetros
Peso: 3,7 g / 6,9 g (inclui cabo)

Incluído:
HO-01 OLED Display Module x 1
cabo 4Pin 150 milímetros x1

  • SKU 387000035-0
  • Brand -
  • Capacidade ( mAh) -
  • Peso 18.0000
  • Comprimento 55.00
  • Packaging Width 10.00
  • Altura 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little oled display!
It works out of the box with a multiwii 328P on 3.3v or 5v.
I got it to work on a naze32 by shorting pins 19 & 20 (3.3v only and cleanflight firmware)

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got one of these and was working fine with the multiwii and four separate esc's. I moved everything to a different kit and used the Qbrain 4-in-one esc. The board and gps seem to still work, but my lcd no longer works. Does anyone know what could cause this as it was working before and I have not changed any software settings? So I have tried in vain to bring up the screen but it just won't turn on with the new all in one esc.

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good product, I'm using it with MultiWii 328p and with that board the OLED works great out of the box. With this little screen it's not necessary to carry all the computer stuff for flying sessions. A must have.
Regards, Tomek

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

still trying to figure out how to connect this to my megapirate board as the connectors aren't standard on that board. haven't got the chance to connect it to my 328p yet though, have to reload the firmware etc to try that

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product at a very good price specifically for the mutliWii software which is using its own i2c drivers. If you want to use it for general Arduino or other projects then you need a little hack since the board is not wired to give information back through the i2c bus ... simply put a solder bridge between pin 19 and 20 and it will work great with the libraries on the internet !

Customer files
RC Download [47]
Solder 2 pins to enable arduino ! Download [445]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save