Registar

Product Finder

Definições

Useful links

 
[["US","AU","GB","DE"]]
Registar
Shipped From:
  • USA

MXS-R Aerobatic 3D Avião 20CC Balsa 1.625 milímetros (ARF)

MXS-R Aerobatic 3D Avião 20CC Balsa 1.625 milímetros (ARF)

QTY:

Now save guardar 0,00 € 0,00 €

248,98 €
Stock:
Peso:
7500 g
SKU:
248000004-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrição
do

Um dos aviões de acrobacia olhar mais quente ao redor é o MXS-R. Boa aparência por si só não são suficientes, o Hobbyking MXS-R 20CC foi projetado com uma coisa em mente, impressionante e acrobacias extremas.

A qualidade do MXS-R 20CC é simplesmente tão bom quanto ele ganha, a fuselagem foi construída para manter o peso de vôo mínima, mas forte o suficiente para tomar a punição de acrobacias extremas. A cobertura de excelente qualidade foi habilmente aplicado e para o toque final, as calças capuz, copa e rodas são terminou em uma pintura de brilho profundo. O hardware que inclui rodas, tanque de combustível e chifres de controle de fibra de carbono é excelente e também escolhido para manter o peso a voar a um mínimo absoluto. Além disso, as características do modelo conecte asas e pouso de fibra de carbono equipamento e montagem de roda de cauda.

O HobbyKing MXS-R 20CC executa cada polegada tão bom quanto parece, naturalmente faz para um grande esporte avião acrobático, mas seria justo dizer que incondicional 3D é o que o MXS-R foi projetado para. O leve e precisão da estrutura do avião, superfícies de controle grandes, parece impressionante e especificações de alta qualidade linha de fazer o MXS-R 20CC um avião deve ter para todos os pilotos de acrobacia e 3D!

Características:
• quase pronto para voar - Basta instalar sua escolha de motor, bateria e eletrônicos
• Todos Balsa e compensado de construção
• conjunto de engrenagens de fibra de carbono de pouso e roda de cauda
• dois plug peça em asas
• Superbly aplicado, revestimento de alta qualidade
• tailplane aerofólio Full / elevador / fin e o leme
• Excelente esquema de cores para fácil orientação
• escotilha de acesso Grande fuselagem
• geradores de força lateral opcional de ponta de asa

especificações:
Envergadura: 1625 milímetros
Duração: 1,500 milímetro
Área Wing: 50.1dm2
Vazio Peso: 2700G

exige:
Motor Gas 20CC
6 Normalização High Torque Servos
5-6 transmissor de canal e receptor
receiver Battery
Diversos Adhesives

Product
Specifications

Características do Produto

  • SKU:
    248000004-0
  • Brand:
    Não
  • Peso ( g )
    7500.00
  • Comprimento
    1230.00
  • Largura:
    295.00
  • Altura:
    470.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • 20cc MXSR

Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.