Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

NTM Prop unidade 28-36 1000KV / 400W sem escova Motor

Generating Links

NTM Prop unidade 28-36 1000KV / 400W sem escova Motor

Preço:

Now save economize 0,00 € 0,00 €

26,97 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
NTM2836-1000
Envio Grátis? Clique aqui aprender mais!

motores NTM Prop Drive estão OutRunners desempenho de rock-solid com enrolamentos apertados, rolamentos de qualidade, ímãs corretamente avaliado, estator equilibrada e anéis de fluxo mais eles são QC verificado em 14 pontos, a partir de material processamento de todo o caminho através de teste de dyno final.
Porque nós projetar e construir estes motores completamente interno (de 3D / 2D desenho de materiais sourcing, usinagem, balanceamento, montagem final e dyno) podemos controlar completamente a produção e garantir a consistência do produto, desde a concepção até ao envio do produto para você. A remoção de meio-homens significou podemos conduzir melhor valor para o mercado e varejo estes motores na fábrica (nossos) preços! Todos os números de desempenho são reais e testado em nossos próprios dynos motoras.

Nossos engenheiros QC verificar e equilibrar cada motor antes do envio para o armazém HobbyKing.com.

especificações:
Modelo: NTM Prop Series Unidade 2836 1000kV
Kv: 1000rpm / v
Poles: 3
Motor vento: 14T
Max atual: 30A
Max Power: 400W
Shaft: 4 milímetros
Peso: 89 g
ESC: 30 ~ 40A
Contagem de células: 3s ~ 4s Lipoly
Furos de parafuso: 16mm e 19 milímetros
Rosca do parafuso: M3
Conexão: 3,5 milímetros Bullet-conector

Prop Dados de Teste:
11x7E - 11.1V / 220W / 20A / impulso 976g
11x7E - 14.8V / 412W / 27.7A / empuxo 1,485 kg
12x6E - 11.1V / 215W / 20A / impulso 1,08 kg
12x6E - 14.8V / 430W / 29A / impulso 1,42 kg
13x4E - 11.1V / 223W / 20A / impulso 1,06 kg
13x4E - 14.8V / 400W / 27A / impulso 1,48 kg

Nota: Um pacote de acessórios está disponível para este motor. Por favor, veja os itens relacionados abaixo.

  • Kv ( rpm / v ) 1000.00
  • Correntes Max (A) 30.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 15.00
  • Potência (W) 400.00
  • Shaft A ( mm) 4.00
  • Comprimento B (mm) 36.00
  • Diâmetro C ( mm ) 28.00
  • Pode Comprimento D (mm) 25.00
  • Comprimento Total E ( mm) 56.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Kaisar | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2016

I do NOT suggest this motor for a fixed wing plane!!!
The 3 pole configuration make it accelerate very very very slowly, initially I thought that the esc is faulty... also try to change timing since the auto does not work very well in some controllers (2-3Amps more). Keep in mind that "big" size props are needed in order to give sufficient thrust or airspeed (other 1000kV motor need significantly smaller props). Fitting a "huge" 11/7 or 12/6 is the way to go on 3s, but you only get 14-15A.
Disappointing performance on a Hobbyking /Hyperion ENIGMA the plane was flyable but did not have the speed/power for maneuvers, or to handle windy conditions.
On the other hand built quality is good, total weight including prop and base mount is 101gr
Maybe in a multirotor this motor will give better results...

HamOp | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 13, 2016

I'm using this one for my Dragonfly 1800 with stock propeller, works great and power is plenty with 3S.

mase60 | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 11, 2016

I to have used this motor with a Phoenix 2000 glider 225 watts using a 10/6 prop motor does get warm but really pulls the glider around so I going use sub-trim to cut the throttle back a tad to under 200 watts using my watt meter.Very happy with this motor worked out of the box.

justin | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 22, 2016

No way to attach propeller, completely useless!

Looks like a prop hub could be bolted on, shame it wasn't included with the motor. Swapped shaft around, no good.

john evans | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2016

purchased two of these first one on test bed with 11x7 prop would not go above 1/3 revs before shutting down. tested speed controller on another motor works fine. will spin up a smaller ie 9x5 no problem. Second motor was tested in the same way a about 1/3 revs the whole motor shot apart breaking the shaft. Either the clip on the back came off or it was missing in the first place fitted new shaft it will run but very rough indicating to me it shot a bearing coming apart. In the throws of sending them back or throwing them in the bin and consider lesson learnt.

Heli-Player | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2016

Motor ist ein Hitzkopf, Leistung wird in Wrme umgewandelt, nach 5 Flge bereits eine schwarze Wicklung und Temperaturen die den Magneten schadet. Keine Kaufempfehlung

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 09, 2016

Profitant d'une offre promotionnelle de Hobby King, j'ai achet? ce moteur de tr?s bonne qualit? au prix imbattable de 7?30 soit ? 50pcnt de son prix de vente normal.

Il est pr?vu d'?tre mont? sur un Fun-Fly de 1m20 est d'un poids de 1.2Kg, au vu des essais de traction fourni dans les commentaires sur le moteur cela devrai me donner un bon rapport poids/puissance

Phillip | Comprador Verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

Purchased two of these motors, the 1000kv and a 1400kv for a 2 meter glider. The ratings are a bit overstated, try it and find out the hard way. Hot motors melting insulation, etc. But my biggest gripe is the bearings and end float. The 1000kv on test sheared it's shaft due to vibration at half throttle the prop narrowingly missing my face. Replaced the motor with 1400kv version. Vibration again. Changed folding prop set up to verify what was causing the problem. Definitely the motor. No impressed and wasting my time. Have since purchased Turnigy 28mm XP series. Hopefully these will perform.

| Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 01, 2015

A really good motor. There aren't any problems. Still use it.

Andrew Barclay | Comprador Verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 06, 2015

Bought this for my Phoenix 2000 glider. Using the stock 10x6 prop, blueseries 30A ESC and 1500 3S battery I got the following results;

22 Amps

11.4 Volts

250 Watts

A bit high on the amps and the motor does get quite hot but it performs well and propels the glider with ease.

  1. 1
  2. 2
  3. 3
Arquivos de clientes
No File Name Download [2139]
No File Name Download [293]
NTM Prop Drive Series 2836 Download [195]
Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!

Acessórios