New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

NTM Prop unidade Series 28-26A 1200KV / 286w (versão curta do eixo)

NTM Prop unidade Series 28-26A 1200KV / 286w (versão curta do eixo)

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 8,72 € 8,72 €

Special Price 4,55 € 4,55 €

You save guardar 8,72 € 8,72 €

Was  13,27 €

Estado:
Disponível
SKU:
NTM2826S-1200
WANT FREE SHIPPING? Click here to find out more!

Esta é uma versão curta do eixo do nosso popular NTM 28-26A do motor 1200KV brushless outrunner. Ele é construído sem eixo externo que lhe permite montar facilmente este motor para o seu quadro multi-rotor sem a necessidade de qualquer modificação.

motores NTM Prop Drive estão OutRunners desempenho de rock-solid com enrolamentos apertados, rolamentos de qualidade, ímãs corretamente avaliado, estator equilibrada e anéis de fluxo mais eles são QC verificado em 14 pontos, a partir de material processamento de todo o caminho através de teste de dyno final.

Porque nós projetar e construir estes motores completamente interno (de 3D / 2D desenho de materiais sourcing, usinagem, balanceamento, montagem final e dyno) podemos controlar completamente a produção e garantir a consistência do produto, desde a concepção até ao envio do produto para você. A remoção de meio-homens significou podemos conduzir melhor valor para o mercado e varejo estes motores na fábrica (nossos) preços! Todos os números de desempenho são reais e testado em nossos próprios dynos motoras.

Nossos engenheiros QC verificar e equilibrar cada motor antes do envio para o armazém HobbyKing.com.

especificações:
Modelo: NTM Prop unidade Series 28-26A 1200KV (versão curta do eixo)
Kv: 1200rpm / v
Max atual: 17A
Max Power: 215W @ 12v (3S) / 286W @ 15v (4S)
Shaft: 3mm
Peso: 57,6 g
ESC: 20A
Contagem de células: 3s ~ 4s Lipoly
Furos de parafuso: 16mm e 19 milímetros
Rosca do parafuso: M3
Conexão: 3,5 milímetros Bullet-conector

Testes PROP:
7x6E - 11.1v - 90W - 8A
7x6E - 14.8v - 192W - 13A
8x4E - 11.1v - 100W - 9A
8x4E - 14.8v - 222W - 15A
8x6E - 11.1v - 145W - 13A

Nota: Um pacote de acessórios está disponível para este motor. Por favor, veja os itens relacionados abaixo.

  • SKU NTM2826S-1200
  • Brand NTM
  • Peso 76.0000
  • Comprimento 50.00
  • Largura 45.00
  • Altura 50.00
  • Kv ( rpm / v ) 1200.00
  • Correntes Max (A) 17.00
  • Resistência (MH ) 0.00
  • Max Tensão ( V) 15.00
  • Potência (W) 286.00
  • Shaft A ( mm) 3.00
  • Comprimento B (mm) 26.00
  • Diâmetro C ( mm ) 28.00
  • Pode Comprimento D (mm) 15.00
  • Comprimento Total E ( mm) 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Average outrunner, I guess you get what you pay for. By the first or second flight the bearings already have movement and motor starts making noises, still seem to function ok but for how long?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Average outrunner, I guess you get what you pay for. By the first or second flight the bearings already have movement and motor starts making noises, still seem to function ok but for how long?

These motors are terrible! I used them on my quad and all the bearings broke within the first few flights ad they are super loud. After around 10 flights or so the bullet connectors started to break of and fall off the quad. I would recommend to stay away from ntm in general, waste of time and money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors are terrible! I used them on my quad and all the bearings broke within the first few flights ad they are super loud. After around 10 flights or so the bullet connectors started to break of and fall off the quad. I would recommend to stay away from ntm in general, waste of time and money.

Great product, perfect for ft flyers

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product, perfect for ft flyers

Runs smoothly and strongly. note the wattage, this motor is no joke, overkill for my scratch built plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Runs smoothly and strongly. note the wattage, this motor is no joke, overkill for my scratch built plane

i use this 1200kv motors in my Dart 400 quad. performance is fantastic. I put scorpion oil in the bearings so they are ok for now. After 3 months the bearings still sound okay but not very smooth. It works well with my F-20A esc with simonk fw. 8 inch carbon filled props work well on 3s and 4s lipo and it does not even get warm. Will have to try the multistars if these motors fail. APC mr props also work very well with these motors. the 8045SF props cause too much vibration so i don't use them with these anymore.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i use this 1200kv motors in my Dart 400 quad. performance is fantastic. I put scorpion oil in the bearings so they are ok for now. After 3 months the bearings still sound okay but not very smooth. It works well with my F-20A esc with simonk fw. 8 inch carbon filled props work well on 3s and 4s lipo and it does not even get warm. Will have to try the multistars if these motors fail. APC mr props also work very well with these motors. the 8045SF props cause too much vibration so i don't use them with these anymore.

trs bon rapport qualit prix

trs puissant ( f450)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

trs bon rapport qualit prix

trs puissant ( f450)

I am using four of these motors in a quad and they have been fantastic, the amount of power that these little motors put out is very impressive. My one complaint is that one of the motors has a bearing going out and it sounds like a can of rocks in there. However it is still working just fine for now... Over all I would highly recommend this motor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using four of these motors in a quad and they have been fantastic, the amount of power that these little motors put out is very impressive. My one complaint is that one of the motors has a bearing going out and it sounds like a can of rocks in there. However it is still working just fine for now... Over all I would highly recommend this motor!

Bought these motors for my very first quad. Super impressed, took all the impacts and crashes I dished out at them and then some. Can't beat these bad boys for the price. Would have given 5 stars but the writing on the side rusted on me, otherwise, 2 years of use and going strong.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these motors for my very first quad. Super impressed, took all the impacts and crashes I dished out at them and then some. Can't beat these bad boys for the price. Would have given 5 stars but the writing on the side rusted on me, otherwise, 2 years of use and going strong.

Great motors for a medium sized multicopter. Use them in my Talon V2`s, no failures yet and more than enough power to swing props up to 12" 4.5.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motors for a medium sized multicopter. Use them in my Talon V2`s, no failures yet and more than enough power to swing props up to 12" 4.5.

Bought these a few months ago and am using them on a 450 quad with a 3s Lipo. For the most part, the bearings are good and vibration free though I am waiting on an exchange for one of the motors that had oddly offset holes, that made the Prop adapters (which I agree should be included) wobble pretty badly. Seems like there is a QC issue with the prop mounting holes on these so be wary and check them when you get them, maybe even buy an extra in case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these a few months ago and am using them on a 450 quad with a 3s Lipo. For the most part, the bearings are good and vibration free though I am waiting on an exchange for one of the motors that had oddly offset holes, that made the Prop adapters (which I agree should be included) wobble pretty badly. Seems like there is a QC issue with the prop mounting holes on these so be wary and check them when you get them, maybe even buy an extra in case.

  1. 1
  2. 2
  3. 3
Customer files
Ecks frame with ntm 1200 Download [1173]
bad bunch Download [3118]
necked motor Download [2736]
bottom bearing Download [2431]
top bearing Download [2207]
bearings Download [1976]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save