Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

NX-4008-620kv Brushless Quadrotor Motor

NX-4008-620kv Brushless Quadrotor Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
99 g
SKU:
NX-4008-620

Combine

essential items and
acc
Descrição
do

Se você é sério sobre o seu desempenho quad-helicópteros, então não procure mais do que o NX4008.
Construído com high-end 45SH ímãs, um pólo de alta contagem e montagem do motor costume, este quad-motor é projetado exclusivamente para aplicações multi-rotor.
O NX-4008 inclui um construído em proteção de prop de adereços estilo GWS e construído em alumínio de montagem para instalação rápida e fácil em seu quadro Quadrotor.

Esta não é uma outrunner avião modfied. Ele foi projetado desde o início para helicópteros quad.

óculos
Kv: 620rpm / v
Acontece: 16T
Resistência: 0.129Rm
Ociosa atual: 0.8A
Pode tamanho: 45 milímetros
Comprimento pode: 14 milímetros
Shaft: 3mm (Inclui protetor de Suporte de montagem de adereços estilo GWS)
ESC sugerida: 30A
Classificado Watts: 180W
Peso: 79 g
Contagem de células: 3 ~ 4S Lipoly


Adaptador de hélice terno cinco milímetros

Product
Specifications

Características do Produto

  • SKU:
    NX-4008-620
  • Brand:
    N/D
  • Capacidade ( mAh)
    Não
  • Peso ( g )
    99.00
  • Comprimento:
    160.00
  • Largura:
    52.00
  • Altura
    100.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered 4 of these for a Crossfire 2 quadcopter. As another review says, the lack of screws was kind of annoying. These motors look beautiful on the quadcopter, have a lot of power and are easy to install once you get the M2.5 screws. I'm not sure about the price, maybe cheaper motors perform just as well, but I haven't tested anything else so I can't really comment on that.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have received my 4 engines today, and two were having problems with unglued magnet and two magnet brokens... Have to repair them without having seen them turn ! That's not a good way to have a good feeling... Please take care of that HK !!!
Engine bigger than attended but feel ok. Bearing seems tiny for such a big engine and 12' props, I have to take care of that. ESC to be soldered and tests to comes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Motor See the Video:

https://www.youtube.com/watch?v=LBWlbGJWjpA&feature=player_detailpage

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I desperately need shafts and prop adapters for these. The ones that come with the motor are pretty fragile. I wish Hobby King would tell us which ones to buy. Or better yet, have an accessory kit for this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The propsavers that come with these are made from soft aluminium and are absolute rubbish. Two of them have snapped within two days, so now I can't fly at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bonjour, Je voudrais savoir si vous pensez que je peux utiliser ce moteur avec du 5S (18,5 volts) ? Par ailleurs est-ce que ce moteur peut entraner des hlices en 14"
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fragile, I wished the made it a bit heavier, and more robust. Well Balanced, but bad Bearings, need to be replaced soon. some run noisy out of the box. Shafts are quite soft, bend on any ground Contact.

Spare Shafts would be URGENTLY needet.

Also a good Motor for a FPV Pusher as it runs very smoothly. No good for Planes where the Prop easily touches the Ground, here this Motor wont make you happy. I use it on 4s with GWS 3Blade 1065 Props
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Optical nice Motor good Magnets and electrical Data, but the Motorhousing is poor and rapidly bend.
the Bearings and the Shaft to small for 12" or 13" Propellers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Multirotor motor with very good quality and price
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For $31 you would think they could have included some screws. Being M2.5 not M3, they are not exactly a common size.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
acc

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.