Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Parkjet 2 alta velocidade Asa EPO 550 milímetros (PNF)

Parkjet 2 alta velocidade Asa EPO 550 milímetros (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1591 g
SKU:
9040000002

Combine

essential items and
battery
Descrição
do

Construída para a velocidade, mas com uma asa baixa-loading, o Parkjet 2 grita através do céu e ainda pode deslizar para uma aterragem lenta. O Parkjet 2 tem um envelope de vôo incrivelmente grande.

O novo e melhorado Parkjet 2 inclui um potente motor outrunner 2623-4500kv brushless, ESC 15A e uma melhor fibra de vidro reforçada de montagem do motor dando a este modelo um impulso significativo no desempenho.

O HK Parkjet 2 é um parque de passageiro fantasticamente rápido com características de vôo lento muito dóceis e previsíveis, é fácil de terra e mão lançamentos são feitos simples com o dedo inferior mantém que também marcar a localização CG. Os principais asas são reforçadas com barras de fibra de carbono e da fuselagem pode aceitar uma ampla variedade de baterias de 800mAh até 1300mAh!

Esta versão do Parkjet 2 vem em formato de "Plug and Fly", com o motor, ESC e servos todos os pré-instalado. Você simplesmente precisa adicionar o seu próprio sistema de rádio e baterias para completar este modelo.

Atenção: de Servo e ESC têm fichas micro receptor.

Características:
• "Plug and Fly" formato - basta adicionar o seu próprio sistema de rádio e baterias
• Construído a partir de espuma EPO ultra-resistente
• envelope de vôo extremamente ampla
• sistema de energia sem escova 4500kv poderosa pré-instalado

Especificação:
Envergadura: 550 milímetros
Comprimento: 415 milímetros
Fying Peso: 210g
Motor: BL2623-4500kv (Incluído)
ESC: 15A micro bujão (incluído)
Prop: EP-4530 (incluído)
Servos: 4.5gx 2 micro bujão (incluído)

Requeridos:
3 ~ 4 sistema de rádio do canal (transmissor e receptor adequado para micro fichas)
bateria 2S 7.4V 800 ~ 1300mAh Lipoly
colagem espuma-safe

Product
Specifications

Características do Produto

  • SKU:
    9040000002
  • Brand:
    Não
  • Peso ( g )
    1591.00
  • Comprimento
    590.00
  • Largura:
    100.00
  • Altura:
    490.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
i already converted my Parkjet 2 High Speed Wing EPO 550mm with 3 cells set up using 2200kv motor with 30 amp esc and propeller 6x4 and battery 900mah 60c. Flying time is about 3 minutes with half throttle. Esc,motor and battery cold and not sthretch. Powerfull and very enjoy. CG also ok and no need to to trim.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Parkjet is a well-made model which tracks quite nicely for its size! It is quite twitchy, and therefore is by no means a beginner plane, but it's good fun for someone looking for a bit of a challenge! This plane rolls very quickly and can perform various manoeuvres with little trouble. The canopy fits nicely, but has a tendency to fly off, but is easily fixed by a little bit of velcro. I used 80/20 DR/Expo on this model to get it flying comfortably and smoothly, but 100pcnt rates work well for a phenomenal roll rate! This is a strong intermediate plane, and will provide plenty of learning experience.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My "PNF" version (no stabi) also arrived.
I also got this strange 5-wire connectors and an ESC with 3 wire JST 1.25 pitch.
So I replaced both servos ESC (servos 4,3g and HK-20Ah ESC), using an not a stabiliced RX.
Also I put a little carbon rowings / rods under the rudders and under the wing and some perlon textile ribbons (with EPO glue) on the fuselage for reinforcement.

So this was -NOT- PNF.

BUT ...

The Parkjet 2 flies very well fast. :-)
And this jet can be stall landed with fully drawn rudder ( 25 degrees)! :-)
That's a lot of fun. :-)

(My COG is 3 mm in front of the center of the handhold holes, weight is 240g with LiPo 850 2S).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i bought this park jet and my comments is, this not recommende to beginer pilot because it so hard to hand launch because the electronics setting is not enough to bring this thing climb and must have someone to launch for you.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
DON'T BUY THE PNF version of this model. Mine arrived today, and whilst initial impressions were good (well packed, spare prop, even some 5min epoxy), problems soon emerged. The servos have micro connectors with 5 wires, the esc has a micro connector. In the RCgroups discussion, you'll find that these servos will work only with the 3 axis stabiliser. Secondly, no c/f rods are to be found fitted to the wings as reinforcement. The model that was sent to me does not match the description above. I'm normally happy with HK products, but this is definitely not PNF, more like false advertising.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is nice plane with a lot of good opinions on RC Groups, but this PNF version w/out stabiliser makes no sense at all. Included servos may run ONLY with original stabiliser, so they are useless with any standard or micro RX or with any other stabiliser like Orange. This model shall be described as ... with motor and ESC, because servos need immediate exchange....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice wing, and very fast : a litte too fast for my second airplane model. It is a rebranded version of Skyartec Mini Skyfun ;-) Quality is good but some features are not so well designed :
- i had tu put spacers on the motors mount's screws because it blocked the rotor of the motor when fully screwed (you can also shorter the screws of course)
- when you crash or land hard on the nose, all the front twist up and the hinge has to be glued after a few times
- when you land, the underwing wiring of the servos is very exposed and this is the really bad point of this plane : i have broken 4 servos in only one month...
Turnigy T531-BBD servos fits very well with a 10cm extension cable and have the same mecanical caracteristics than the stock one ;-)
I think i will made landing protections like rails with 6mm depron before my next fly...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cannot wait for this item to arrive
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Parkjet 2

Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Combine

essential items and
battery

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.