Torne-se um fornecedor Blog Novos itens
Registar

Preço total

0,00 €

Carrinho de compras 0 Carrinho de compras 0 Loading...

KS-Servo PDI-HV0903MG Magro Asa HV / BB / DS / 2,6 kg MG Servo / 0.07sec / 9g

Generating Links

KS-Servo PDI-HV0903MG Magro Asa HV / BB / DS / 2,6 kg MG Servo / 0.07sec / 9g

Preço:

Now save economize 0,00 € 0,00 €

14,46 €
Já comprado Discontinued Product

Please continue searching for a similar product.
SKU:
458000009-0
Envio Grátis? Clique aqui aprender mais!

KS-Servo PDI-HV0903MG, asa magro, de engrenagem de metal, 2,6 kg / 0.07sec / 9g

Estes servos são de alta qualidade com engrenagens de metal e com o seu design slim torná-los perfeitos para pequenos planadores, aviões e helicópteros.

Características:
• Excelente torque e velocidade
• metal voltado
• rolamentos de esferas gêmeas
• servos perfeito para pequenos planadores, aviões e helis
• pacote de hardware de montagem completa

especificações:
Modelo: PDI-HV0903MG
Tensão de funcionamento: 6V / 7.4V
Corrente de funcionamento: 100mA / 190mA
Velocidade de operação: 0.09sec.60º / 0.07sec.60º
Stall Torque: 2kg.cm / 2.6kg.cm
Banda morta: 2usec
Viagem de funcionamento: 60º
Rolamento: Dual Ball Bearing
Material de engrenagem: Metal
Conector do fio: 150 milímetros
Faixa de temperatura operacional: -20 ° C + 60c
Contagem Spline: 15
Tamanho: 23,5 x 8,1 x 24,3 milímetros
Peso: 9g

attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Envio vídeo

Registre-se para enviar vídeos, por favor assinar em ou registar

Tópicos
Ordenar por
Tópicos Mais Recentes
* Nome de utilizador:

* Sua resposta:


Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Cancelar
Submeter
Poste um Novo Tópico
* Nome de utilizador:

* Seu Tópico:



Por favor, insira o texto mostrado na imagem no campo abaixo
*Código de verificação:
Postar Tópico

Registre-se para escrever comentários, por favor assinar em ou registar

Walt | Comprador Verificado

  • Overall
  • Quality
  • Value

HVO903mg

Jan 25, 2020

Works as advertised--used to install flaps on Apprentice S

randy | Comprador Verificado

  • Overall
  • Quality
  • Value

nice wing servo reasonable price

Dec 02, 2019

good alternative to hitec.Get 3 for the price of one hitec

Max | Comprador Verificado

  • Overall
  • Quality
  • Value

small servo

Nov 25, 2019

This is a very small servo, is strong enough

Buy-N-Fly | Comprador Verificado

  • Overall
  • Quality
  • Value

Strong servo for it's size

Oct 10, 2019

I installed 4 of these servos in an RCF Edge V3 39"wingspan foamy. The servos are very light and fast. If you need servos that put out over 2 kg of torque this servo is for you. An added bonus is they are below 10g each including wires and connector. There is a considerable amount of slop at center that is magnified when using long servo arms needed in 3d setups. This however doesn't detract from the accuracy when returning to neutral when powered up. It may be due to the tight 2us deadband at center. My aileron servos jittered at neutral but just tapping on the pushrods immediately stopped the jittering. I fabricated a slotted guide that put a little pressure on the pushrod at neutral that worked well and controlled the aileron jittering. I highly recommend this servo for HV set-ups just don't make the mistake of powering them with the full 3s voltage as you will fry your rx and all servos. I made an adapter that powered my receiver and servos through the lipo balancer tap only utilizing 2 cells of my 3s setup. An alternative would be to use a step-down voltage regulator to lower the 3s voltage to 7 to 8 volts.

Colin | Comprador Verificado

  • Overall
  • Quality
  • Value

Eh

Jun 29, 2019

Works well, but it has the design flaw of not including strain relief for the wires coming out of the case. Had the wires pull straight off the PCB. It's easy to open it up and solder them back on, but I'd expect better from a pricey 9g servo.

Jeff | Comprador Verificado

  • Overall
  • Quality
  • Value

I bought 2 of these, one worked fine, the other didn’t work at all, checked the servo and found that the black wire was not connected. Planning to send it back,

May 27, 2019

Black wire was not connected

Walt | Comprador Verificado

  • Overall
  • Quality
  • Value

Wing Servos

Apr 21, 2019

Excellent wing servos for narrow profile wings

Subir arquivo

Registre-se para fazer upload de arquivos.
Por favor assinar em ou registar para começar a ajudar amadores agora!