- Descrição
do -
Pin Horns
Size：6 × 13 × 18 milímetros (3hole-branco)
- Product
Specifications -
Características do Produto
-
SKU:
017000032
-
Brand:
N/D
-
Peso ( g )
19.00
-
Comprimento
75.00
-
Largura:
12.00
-
Altura:
60.00
-
SKU:
- Community
Discussions -
- Rate&
Review -
Estan bien, pero vienen sin la base, hay que pegarlos con ciano o hacer algun brico con algo de plastico duro tipo tarjetas de credito para hacer una base.Works well. I use these horns on all of my foamies. Pre-drill at exactly 1/4 inch and 1/2 inch from the control fold line (hinge). I use hot glue or 5 min epoxy to bond them. To increase the surface area on fragile foam, I spread epoxy a bit wider than the horn's base, and I run a 3/4 inch line of epoxy from the horn in the direction of the trailing edge. When the epoxy hardens, it acts like an extension of the horn base and provides a wider grasp on the control surface, spreading the load.Very good horns. Use them on my flite test scratch builds. Just trim the pins if they are to long, some hot glue & they will outlast the plane. Very cheap for what you getThis are one of the best horns out there, they'll never pop out of your control surface because they're held on securely by the two pins.Nice quality horns, BUT please sell them with the lock tap? what is that about, now i need to make 10 locktaps myself...
awesome horns, really strong and light, they glue great with epoxy to any foam or wood model.Very good quality horns i likeexcellent item well worth the wait from hk warehouse and at a silly cheap priceVery tough for the size, easy to use touch of hot melt on the back after gluing in and your donewell made and strong. Good buy - Upload
Videos - Upload
Files -
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!
