Registar

Product Finder

Definições

Useful links

Bate-papo ao vivo
 
[["US","AU","GB","DE"]]
Registar

Piper PA-18 Supercub Plug-n-Fly 18A Brushless w / 3 Servos EPO

Piper PA-18 Supercub Plug-n-Fly 18A Brushless w / 3 Servos EPO

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2139 g
SKU:
SuperCub-PA18
Descrição
do

Se você é um detalhe escala anormal se afastar agora, este não é plano para você!
O PA-18 é uma EPO Piper Cub que faz para isso é a falta de detalhe escala com diversão, características fáceis de vôo e que se preocupe livre sensação de espuma EPO. Sabendo que você não vai ser jogar o avião no lixo em seu primeiro pouso mal sucedido.
Um livre de problemas levar foamie que você não vai se preocupar para tentar novos truques com.

Spec.
Asa Span: 1.070 milímetros
Comprimento: 710 milímetros
Voar Peso: 430g
Área da asa: 17,1 g / dm2
Servo: 3x9g
Motor: Powerful 400 Brushless Outrunner
ESC: 18A
Prop: 9x5


Requeridos:
Seu próprio TX e RX
bateria 1300mAh 3S 20C Lipo

Product
Specifications

Características do Produto

  • SKU:
    SuperCub-PA18
  • Brand:
    N/D
  • Peso ( g )
    2139.00
  • Comprimento
    1093.00
  • Largura:
    190.00
  • Altura:
    223.00
Community
Discussions
Rate&
Review

Escreva a sua análise

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for my father in law to train on before taking his nice super scale j3 up. He has never flow it because this plane was awful.

First, the build was a nightmare as the tail section is super brittle and weak. Any bump will cause the foam to snap.

Second, the wing supports are a joke as they broke on the first flight causing a awful landing that broke my tail section (again).

Finally, I have gutted this plane and used the motor and sec in a foamy 3d plane I made.

I had hopes for this plane but I was disappointed. Buy the larger Cessna trainer as it is awesome and not too much more money. 4 channel and 4 servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok, this is a very bad trainer... I can hardly take-off, and almost always it just banks to one side and hits the ground.

I have balanced it very carefully, limited throws etc, but this plane keeps crashing. I'm giving up on it... gonna buy a bixler.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Beautiful flyer! Very gentle, and smooth. That said, the roll rate is dangerously slow and the aileron servo doesn't return to center. Anyway... I'm using this plane for FPV because of the stability. On a side note- I've been flying for 15 years, what's a gentle aircraft to me may be uncontrollable for another.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality .



best for beginner .



Very cheap for what you get .



i try it with 2200 mah battery and its more fast and more comfidence.



thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great trainer. I have owned it for 6 months and still learning the hobby with it. I agree with the modifications listed by other people. They are

1. The wheels will fall off first flight as the plastic on the end of the wire will break. Get some of those metal things with a grub screw to hold the wheels on.

2. Do not fit the fairing to the undercarriage/landing gear, and bend the wheels forward otherwise it tips on its nose on landing. Alternately put a front wheel.

3. The spars are crap and brake on the slightest bump. Throw them away and fit a carbon rod to the wing to reinforce it. Just cut out the foam with a knife and epoxy the rod in place.

4. The speed controller (ESC) loses sync at full throttle. Either fly it at half throttle or get a new speed controller.

5. The battery cover pops off. Use a big fat rubber band to hold the battery in. The 1300 3S battery is a real tight fit already in front compartment.

Besides that, everything is good, and this is quite aerobatic and flies with authority. You can fly this thing real high so that if you make a mistake you have plenty of time to recover. It does bounce around a lot in the wind, so fly with wind less than 10 kmh.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great trainer. I have owned it for 6 months and still learning the hobby with it. I agree with the modifications listed by other people. They are

1. The wheels will fall off first flight as the plastic on the end of the wire will break. Get some of those metal things with a grub screw to hold the wheels on.

2. Do not fit the fairing to the undercarriage, and bend the wheels forward otherwise it tips on its nose on landing. Alternately put a front wheel.

3. The spars are crap and brake on the slightest bump. Throw them away and fit a carbon rod to the wing to reinforce it. Just cut out the foam with a knife and epoxy the rod in place.

4. The speed controller (ESC) loses sync at full throttle. Either fly it at half throttle or get a new speed controller.

5. The battery cover pops off. Just use a big fat rubber band to hold the battery in.

Besides that, everything is good, and this is quite aerobatic. You can fly this thing real high so that if you make a mistake you have plenty of time to recover.



Normaly, on crash all that needs replacing is the motor and prop. Order a heap of these things and the cheapest 9050 props from ebay.

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=5429



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aeronave ruim de pilotar com pouco vento, trem de pouso fraco, trem de pouso traseiro quebrou no primeiro pouso, muito fraco o aero
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm sure this won't post but here goes.I got it today and tossed it in the trash. No receiver,battery,charger,adapter,12amp esc should have a 25a, no transmitter,and conflicting instructions. I'm a platinum member, what a joke. I still have a couple hundred dollars of stuff still coming. Oh boy did I take a screwing. Thats what I get for trying to save some money. Never buying from here again..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Im very disappointed of my plane arrived w/o elevator and rudder until now I have not received the missing parts
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tossed the wing struts and glued a 3mm CF rod into the wing instead. Removed the wing attachment catch and fitted dowels and rubber bands. Reamed the 2 bulk heads of the second compartment under the wings and fitted an 18mm thin Zippy 1600 mAh 3S 20C battery. Fitting the battery is a little tricky as it has to slide back to start with and then is pushed forward. Battery slides forward as far as possible, but still had to add nose weight. Can't fly on full throttle as motor seizes up, but flies ok on half throttle. I don't use the wheels, but taped the u/s with Gaffa tape for belly landing in grass. Cut the motor shaft and fitted a prop saver. Aileron bell cranks needed work to make them center properly. Plane is very light and does not like any wind at all. Would not recommend this model as a trainer.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!

Customer files
No File Name download now [44kb]
supercub mannual download now [6283kb]

Etiquetas de Produtos

Utilize um espaço para separar as etiquetas. Utilize aspas simples (') para frases.