HobbyKing 3D Filament Printer 1,75 milímetros POM 1,0 kg Spool (branco)

• Overall
• Quality
• Value

very good product

Aug 03, 2022

very good product,fast shipping and value for money

• Overall
• Quality
• Value

Tricky!

May 11, 2021

The quality of this product, price and delivery from HobbyKing were all excellent as expected.
This was my first foray into trying to print with POM and I have to say, it's tricky. I can't say I had a great deal of success but I'm printing with what might be termed a domestic printer and frankly, I feel you maybe need something better to do this properly.
If you need POM, the product is fine, but be prepared to work at it to get a good result.

• Overall
• Quality
• Value

Pom

Aug 26, 2019

Great

• Overall
• Quality
• Value

Slippery stuff

Mar 09, 2019

Also known as delrin a form of hardened nylon is extremely slippery and tuff stuff. If you can, try to design the part with extra bottom material, and good luck making it stick but if you keep it molting hot and clear it tends to stay put until it cools and gets frosty. You can try printing on top of some other material.

• Overall
• Quality
• Value

Very difficult to stick to the bed.

Feb 11, 2017

Finally I've got POM to stick to my heated bed.
I use wood, multiplex, sanded, on the 120'C heated bed.
After the first layer on low speed, 240'C nozzle temperature, I pause and use CA glue and accelerator to all the edges.
Then continue on moderate speed at 240 'C extruder temperature.
The wooden plate must be strong and well fastened to the bed, else all get bended.
After printing it's very difficult to separate the work from the wood.

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 10, 2016

This material prints really well and is extremely tough. BEWARE I am yet to find a reliable print surface due to shrinkage. You will need heated build plate and probably a very warm printer enclosure.