adaptador de hélice.
4 milímetros Motor Shaft.
6 milímetros Eixo da hélice.
adaptador liga com parafuso sem cabeça e cone final da liga.1pc Only.
Características do Produto
Peso ( g )
Facil de montar e bem equilibradoEinwandfrei Qualitt - optimaler Rundlauf - SpitzenpreisI bought four of these and none of the end cones appear to be balanced/centered. The adapter part however can still be used with an M6 nut and the included washer.
Both 12x4.5 SF and APC Style 14x7 props fit really well then.This adapter is as good as the best ones available. Well and accurately machined. The shaft hole is so tight it fits like a glove and two grub screws will keep it on. Request: Please produce a version of this with 24 mm long prop shaft!!!The hole for motor shaft is slightly bigger than 4mm and because grab screws are NOT opposite to each other adapter is not sitting straight on the shaft. It has small bank towards side where screws are. Excluding this quite nice adapters.particularly suitable in motor Turnigy C3530 i have a .. I recomeded Prop adapter w / Alu Cone M6x4mm shaft (Grub Screw Type) motor rotation so stable .. and the driving force to be strong .. good luckQuality seems good but I could never get the grub screws tight enough.. I am going to try "colet" type next time ..Sauber verarbeitet, guter Rundlauf, bin zufrieden!This is a good adapter for the price. I do like the grub screw type because I often have to change props on 3d training. And those stay where they are if you remove the cone.Pretty beefy and appears machined pretty true. Ill be using it in a airplane with a APC 4.1 x 4.1 prop turning just over 30,000 RPM
Somente usuários registrados podem fazer o upload de arquivos. Por favor Registre-se para que você possa começar a ajudar seus colegas de hobby hoje ainda!